Changing hair color ou adding highlight is pretty easy if the hair is very light color (ex: blonde) but with dark hair it gets alot trickier and i am never happy with the final results...
What kind of techniques do you guys use to do this? best thing I can can up with is using color replacement tool... but the highlights and so ... its just not a vivid convencing look.
This may sound rude since ive just signed up but i installed photoshop 2 days ago and can't manage to get it working. (although i doubt i'd know how to do this anyway)
Would someone be able to change my hair colour at all? (im not sure how difficult it is).
trying every layer mask combo I could think of to create a realistic shade of white hair that doesn't look like I just used the brush tool to make it.
I've tried lighting up the shadows with the curves option then using the selective color option. But all that does is make a very fake looking film to put over the eyebrows (ya it's eyebrows I'm working on, I'm trying to get them to match a white wig the subject is wearing.)
I've also tried using the solid color option, and a color overlay and that just came out weird.
Has anyone ever turned pitch black hair to white and had it still look like hair?
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View Relatedwe recently had some photos done of the staff.
they don't like the orange background and want some other nice looking background. the male individuals would be pretty easy to cut out with pen tool but there are some females that have fluffy or frizzy hair and how to cut out around hair?
i use CS4
how do i make hair that looks pretty real?
View 2 Replies View Relatedi would like to know if its possible to get the hair of a guy and put it in an other with the photoshop . if its possible can u tell me how to do it ?
View 3 Replies View RelatedI'm working on a project of an elf girl and she has thin straight black hair, but I'm really not sure how to get that to work... I'm sure I could go one strand at a time, but I did that last time and I really don't have that kind of patience to do it again... Is there any kind of shortcut effect?
View 4 Replies View RelatedYou know those glossy ads that appear in magazines for hair products that show a beautiful woman with long shiny hair? I don't believe it's the product or that her hair is that perfect, no split ends etc. How can the smoothest hair be acheived using Photoshop?
View 3 Replies View RelatedI got a picture of a lady, however, because of the lighting and the fact that it's b/w some parts of the hair are so dark that you can't see the hair at all.
Is there any techniques I can use so that I can make it look like the hair is slightly visible (even though that area is currently a solid black).
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedI'm having problems masking hair in this photos:
As you can see, after refining edge, I come up with an area of lighter hair. How can I correct this?
I have this picture, of course a jpeg, so the quality sucks, and i'm having problems selecting the two girls' hair. It blends into the background to where i almost have an impossible time seeing it at all but if i just cut it out it doesn't look natural anymore.
View 7 Replies View RelatedDoes anyone know any photoshop tutorials that involve extending the length of a persons hair? I've been looking all over for such a technique, but to no avail.
View 5 Replies View RelatedI am having trouble with my cross hair not showing the size of my brushes or clones (where it shows a circle around the cross hair to know what size the brushes are) - this has happened before and someone told me to shut it down, and re-open photoshop, but it is not working!
I just made a logo brush, and can't see the brush until I actually stamp it on my picture. I've looked around trying to see if there is a "box not checked" somewhere that would allow me to see the brush size before I start using it, no luck.
In the attached file Lady.psd she gets more / less hair depending on how many layersare on / off. Why is it so? The layers are copies of each other and the original file is fromthe book Creative Photoshop, chapter 14 by Derek Lea.
View 1 Replies View RelatedI've been playing around with this tutorial on aging a person. All is well except when I try to gray her hair I get a mess. Don't know what tool(s) to use. Could use some help since that is not part of the tutorial.
View 5 Replies View Relatedhow to select hair (which is flown in the wind) with a photo that the background isnt in high contract form the object .
i see a lot of guides that explain how to select hair but the comment in those guides is that the background is in high contrast .