I have sliced one of 5 PSD templates for a new web page I am building. The PSDs have many similar components, so I'd like to take the slice mapping that I've created on the first PSD and use it as a "slice template" for the remaining PSDs.
I've tried selecting all the slices in the first PSD and pasting into the new PSD, but that's not working.
I've been in the dark about this subject for too long now. Whenever I use the slice tool in photoshop I find my layout gets skewed when i bring it into dreamweaver and try to add content to it. How do you guys go about doing it? Right now I have my image and i want to cut it out so i can type and add content whereever i want...whats the best way to do this?
View 3 Replies View Relatedway to copy the slices/slice information from one psd to another. In other words, to copy the slices from image1 to image2 - using imageready or photoshop. I've tried several ways but can't figure out how to do this.
View 2 Replies View RelatedI'm trying to save custom tone mapping curves for later reference and use. I can record the "action" of constructing the curve in Image > Adjustments > Curves and applying it to an image. Unfortunately the "actions" panel does an incomplete job of describing this. Instead of reporting where all 16 control points were set, it reports the resulting first 72 of the 256 mappings ...
View 4 Replies View RelatedI have created the layout for a website in photoshop. I guess you could call it the template. It contains the background, the topmenu, the left side menu, etc.
Now, how do I slice it up so the images are placed in the proper table cells in dreamweaver.
(using photoshop cs)
I have a number of documents to be used as web pages, and need them all sliced in exactly the same manner. How can I apply the slicing map from one document - not any image content, just the slicing lines that I have drawn with the slice tool - to another document with the same exact dimensions?
I'm trying to slice an image using the filter-web-slice function but I was wondering if there is a way to customize the function or change its properties in the Python-Fu. I need gimp to slice by columns (start in the top left corner slice each grid down the column then proceed to the next column. Right now all I can get gimp to do is cut by rows. Normally gimps function would be fine but I need the image labeled a particular way so I can use the individual files in a map for a game. I'm making a 118 images so renaming them by hand would take too long.
View 3 Replies View RelatedUsing AutoCad 2011. When trying to 'copy/move to end' a 'layout' tab in a drawing, I keep getting the message:
'ERROR:Copy of layout failed'
I have in the past been very successful operating this command in earlier vers of Autocad.
There are two things in Autocad i can't figure out how to do effectively:
A) I want to create a copy of an existing layout, which i can do easily. However is there a way to make 30 copies without doing each one manually?
B) I have all my layouts set up the same way. Now i want to change all my 30 layouts in the page setup manager to print A4 instead of A3, and to print Landscape instead of Portrait.
Can these be done? Perhaps with some repeat scripts or something?
I am trying to copy a layout tab inside an AutoCad file into a sheet set I created. All folders and sub folders are created and setup. What I need is to be able to copy the same layout under different sub folders inside sheet set manager.
To explain this better, I have a sheets set with all different departments inside our company (ex. CNC Dept., Bending, Machining, Welding, etc.). Some drawings have information for CNC, Welding and bending dept. Therefore I need to be able to copy the same drawing layout multiple times under each dept folder.
How can I do this? It only allow me to drag and copy the file once. I wont be able to drag it again under another folder.
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
1.) I dragged out vertical and horizontal guides from the rulers and then created a new art board. The new art board now has the horizontal guides carried over from the first art board. How can I have separate guides on each of my art boards? I am using art board rulers.
2.) Is there a way to layout vertical and horizontal guides on an art board and copy them over to a new blank art board?
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
i was wondering how to slice a site layout anyone got a easy way or doing it ?
View 2 Replies View RelatedWhere do I find the "Slice Tool" in Photoshop CS6 Extended (Student/Teacher Edition)?
View 1 Replies View RelatedI often work on items for the web that I want to slice, but I need to slice them in layers. For instance, a background image, then some transparent PNGs to be placed on top of the background.
If I have everything laid our properly in Photoshop, then the layer items all overlap. I can turn off layers and export the background as one slice, then turn off the bkgrd and turn on a foreground item and create a slice for that... and so on. But if I want to go back and re-export the background (due to a change) the overlapping slices cause it to now break up into multiple pieces.
I can separate the layered items so that they are off to the side and the slices no longer overlap, but now any adjustments in the layout are hard to make because everything is all separated out. Is there a way to handle leaving the slices overlapped but not have them break up at export?
Is there a way to create a selection from a slice in CS5?
View 1 Replies View RelatedMy web slice tool has gone mad...I've taken Adobe CS5.5 off the computer but still having problems. I guess I have a setting messed up.
1. Although I have chosen to save file as JPG, everything is saving in GIF.
2. After reinstall, still having problem #1 but some slices with system chosen names are not saving at all but present at time of web save, named and set up as Picture.
I took all the slices off and redid the thing several twice and it's still only saving slices I name and only in GIF.
I have looked under the crop tool and ALL the other tools and nada. So have i got a bogus piece of junk?? without it PS 5.5 and 6.0 are useless. yes I have the extended versions of both. why spend all that money to do nothing I need.
View 5 Replies View RelatedAs you can see the white box has an outer glow on it's edges to create a shadow effect. Take a look at this next image:
The first one is a simple GIF version. The second is a GIF put on top of a black background (since the forums page color is white) to show you that the shadows were not transparent. Without the background color there, the edges should be transparent but they are not. If I turn Matte off it still isn't smooth as it should be. Is there any way I can get the shadow to have a transparent background? I thought of using PNG's but they aren't supported by many browsers properly.
Every time I use the tool I end up with little slivers of images all over the place. It seems i can't get the slices close enough or I'm just plan doing it wrong.
I want to stop the slivers, and I want to slice particular items.
I have an image that is split up into many slices and I want to only export one slice from this image. I can't seem to find how to only export one slice without having all the others saved as well. This is just a matter of inconvenience, it would be nice to only select a particular slice to export.
View 2 Replies View RelatedI open an image lately I've been getting an overall slice indicator around the whole image. This causes problems when I try to hide grids or selections I sometimes have to hit command H twice, sometimes I don't, depending if it's showing or not when I use that shortcut
Is there something to keep it from being there or a way to delete it, I can only find a way to delete them after new ones are created using the slice tool.
I used a template to start and have done some extensive modifying to it. My site consists of 4 pages with the corresponding tabs at the top of the page. The top 1/3rd is identical from page to page....the content on the bottom 2/3rds changes. I did all the editing in Photoshop and am now trying to convert it all to html. I have sliced the index page and saved it to html. When I go to slice the second page, the slice numbers dont match up from page to page. I am basically relabeling all my slices. Also can't I just make the bottom 2/3rds of my page change instead of having to reslice the identical top of every page. I have browsed around and I know its possible but I can't pull anything together do mainly to lack of terminology knowledge on my part....
View 8 Replies View RelatedI have a header which I would like to make some modifications to, the author of the header stated this If you want to make changes to the header for buttons are anything else you can open the file up in Image Ready and the slice guides that I used should be visible to you. That way you should get an exact slice guide to match how I sliced up the header area.
View 1 Replies View RelatedI have a bit of a problem with Autocad map 3d 2012. When i try to insert a scale bar or a north arrow or any other carthographic element i simply can't find the layout elements that are supposed to be in layout tools tab. I've done a lot of research online and can't come up with anything.
View 2 Replies View RelatedI've been provided a PSD that contains a background image, a photo for the masthead, and a watermark that overlays the background color but underlays the photo.
I need to create a valid HTML5/CSS3 layout. How do I go about slicing the photo, and the overlapping watermark, ensuring that the watermark doesn't include the photo and vice versa?
I was wondering If there is a way I could tell photoshop to slice and save a very big master file (1920x260.000px) into smaller images (1920x550px)
View 1 Replies View RelatedUsing CS4
I have about 200 PNG's that I need to slice exactly the same way. I know how to slice one image. I'd like to automate slicing all 200 with the same slice positions, sizes and settings.
This is not for web design but rather for iOS game development where I need to cut-up a sequence of images representing an animated sequence into the individual pieces that need to be animated.
I've looked under crop. I have a creative cloud subscription.
View 2 Replies View Related