Ihow one can make a brush like this (the white dotted lines), so when you drag your brush in photoshop, they are spaced out nice like this (instead of doing it individually). If anyone knows how to do this, or know of places with brushes like these.
View 1 RepliesWhen I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it. The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
View 3 Replies View RelatedHow can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View RelatedI need to change a solid line in a drawing to a dotted line to indicate that it is a hidden line. I know I should use Modify/Properties, I just don't know how to import the dotted line into the properties box.
View 5 Replies View Relatedhow do I make a dotted line in photoshop?
View 4 Replies View Relatedhow do you quickly make a rectangle with dotted stroke in Photoshop?
I am trying to emulate rectangles.
So far I've been jumping back and forth from Illustrator and this is getting tiring.
I've switched to Photoshop 7.0, and in all my documents, I have a dotted line bordering them, this doesn't affect the final product, but it does somewhat obstruct my vision of the document... can this be removed? Preview
Another problem I have, though not sure if it is related, I cannot draw 1-pixel lines with the pencil tool near the edges of my documents... sometimes when i try on the top it works, sometimes not and so forth. I just seems to not recognize it when i try to make a custom 1-pixel border.
I am trying to figure out how to make a curve dotted line with photoshop CS3 on WinXP. I know how to make a strait line using the line tool.
Now, how to make a curve line ? I tried the pen tool, but it ended up with a filled shape rather than with a curve line
How to set the thickness of this curve ?
How to make a dotted curve ?
Of course, I don't want to use hand-drawings with the brush.
How would I create a dotted or broken lined stroke around a selection.
View 1 Replies View RelatedI use CS4 and somehow I turned the dotted or dashed lasso line into a solid black line. I want to get the dotted or dashed line back. How can I do that?
View 1 Replies View RelatedI am trying to use the line shape tool. However, the shape stroke type affects the arrows. Does it mean that I have to draw the line first, without the arrows, and then add the solid arrows to the line
View 3 Replies View RelatedEvery time I make a custom line (I used a dotted line a lot), once I close down Xara, the brush is no longer in my library and I have to create it all over again from scratch. Why is it not saving automatically to my library so that I don't have to keep creating the same custom line over and over again?
View 9 Replies View Relatedis PS 7 able to do dotted lines and circles? If I create a selection (circle or rectangle) can it render dotted lines?
View 2 Replies View Relatedhow to draw these two lines (arrow line and dotted line)
View 2 Replies View Relatedhow can i convert drawing pictures into dotted line pictures so that children can connect the dotted lines in order to complete the pictures.
View 5 Replies View RelatedRunning Autocad 2010 in trial mode and did something that created a vertical dotted line giving me an unusable area on the right side of my workspace. I've attached a pic, if I did it right.
View 9 Replies View RelatedI am creating a stitched leather look, and am able to get the black dots under one of the white stitches, but cannot offset my dotted path put a hole under the opposite end of the white stitch. So that I have 2 holes for each stitch.
This makes one black dots every 5 pts
This is the length of my white stitch
Many times I am unable to see the dotted line of paragraph text handle while editing in it. Why it is so. I am using coreldraw x5
View 1 Replies View RelatedI am new to autocad, and just want to know what the dotted line in the paperspace window represents, and if I can move it, adjust it, hide it or delete it? Also, does it show up if I print the sheet?
I have pasted a title block from another drawing onto it, and it doesn't quite fit.
Is it possible to format part of a solid line to dotted? If so, how?
View 1 Replies View Relatedyou can see what i mean in the following picture examples.
Selecting a brush (any 1 pixel) brush
[URL]........
shows my selection . Drawing a straight line
[URL]........
Zooming in to the line (600%) you can see i can draw a marquee through half of it ...
[URL].........
No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation. Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.
I would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
View 1 Replies View RelatedI am new to Autocad and I want to learn as much as I can. I am working on a drawing of a wheel and a 40mm pin that is inside of some boxtubing. I would like to draw a dotted line to show the pin inside the boxtubing. I click properties and I only get the choices of layer , block and continious . I have Autocad Lite 2005.
Also, I love the dimension tool , but how do I know how wide or long I am making it until I do my dimension , and then it is too short or too long. It don't seem like there is a way to edit it. I know it is.
For a while now I have been attempting to resolve a a part of my CAD drawing. As seen below I have a 3D Solid. The part circled is result of subtracting a cylinder from the shape. I am now trying to find a solution to make both the above and below edges of the dotted line meet as one while maintaining the curve I have subtracted.
View 7 Replies View RelatedI have a list of dotted pairs and some of the entries are paired with a deeper list others contain mostly string data. the issue is that I need to print the data to the command line with a newline to seperate them. So I want the output to look like:
;from(customer (city . "Mesa")(zip . "85213")(project (scope (demo . "some description")(construction . "some description")) (cost (subtotal . "some subtotal") (total . "some total"))));tocity Mesazip 85213demo some descriptionconstruction some descriptionsubtotal some subtotaltotal some total
I can print the entire list easily with:
(FOREACH IDX (CDR (VLAX-LDATA-GET "JobData" "LIST")) (PRINC "
") (PRINC IDX) (PRINC "
"))
But, the issue is that when the data is a list it print it out to a single line making it very difficult to read. I tried adding another FOREACH into the loop that I had hoped would iterate through the deeper list and print those lines out in a simular fashion but I only get an "error: bad argument type: consp " and it displays the first element of my list.
I tried to evaluate the IDX and check the type, so that if it is a list then it triggers the deeper FOREACH but it seems I did it wrongly.
Win 7 64 bit
How can I use the bucket-fill option to fill an area surrounded by a dottedline?
The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.
But how can I step back after filling to change the path's line into dotsagain?
My text was working fine til today, now when I try typing text, it is showing as a blank box, until I click outside of it, then it shows as a blue dotted line on the text. Then when I send it to the laser, it is not there!( laser engraver or the printer). I just want the text to be normal, like it was 2 days ago! Before, I could click anywhere, type, and it showed up with no problems!
View 7 Replies View RelatedHow do I change the grid lines from solid to a dotted line in the Section View?
View 3 Replies View RelatedI know how to do it using the brush tool but they aren't hard enough still look kind of fuzzy or soft? Is the a way to create dotted lines with a defined black look?
View 1 Replies View RelatedWhen I use the Adjustment brush it turns the brush line red.... even is I change the exposure, tint, saturation, color...etc
I cant seem to undone it... even if i restart program
I am trying to add dotted pairs to a list of dotted pairs one at a time in a loop, but I cannot get through one iteration.
The pseudo code is basically
(while (/= nil readline) (if = 0 count (setq 0list (cons 8 readline f))
(count = count + 1) (else (setq 0list (append 0list (cons 8 readline f)))
(count = count + 1)
)
)
The program gets the layer name from a text file and makes a dotted pair out it. When it iterates for the first time it puts the dotted pair into 0list. When it iterates the second time I want it to take the next line make a dotted pair and append 0list.
I keep getting error:bad list and I am assuming it is because it is trying to append 0list which only has one dotted pair in it and is technically not a list. I am not sure.
I have like three different versions of the same code I have tried. Any way to read a layer name from a file make a dotted pair and add the dotted pairs to a list of dotted pairs one at a time that would be amazing.
I get the reading and making a dotted pair part. I just can't get the dotted pairs to add to a master list.