when loading an image into cs3 or elements 7 I am getting a large color shift to magenta and the image is getting very dark. I have reset the color settings and reset to default but no improvement in the images. the pictures look good in bridge or any other picture viewer on the computer.
View 3 RepliesI'm building a webpage in PS CS2 and when I switch to Image Ready, the colors shift quite a lot. Why? How do I stop this from happening?
View 5 Replies View RelatedI'm having a strong color shift in Photoshop going from one monitor to another. It's not a calibration issue because the color shift persists when I drag the window from one to another until I do something with the window, then it will shift (i.e. not exactly when I move the window). I'm essentially experiencing the problem described here, only I'm on Photoshop CS5 and his solution doesn't apply because that option is not available.
Windows 7 64bit
Photoshop CS 5 (12.1 x64)
Note the color change, one part of that image is on one monitor, and the other part on the other. (The left is the correct color fwiw.)
I'm guessing there's just some setting somewhere I can toggle?
I have a project where I am converting images from CMYK to Multichannel in order to swap out the Cyan for a PMS color. As soon as I switch to Multichannel, the image reddens up quite some. I know it has to do with the View Gamut in Photoshop, and that it goes away upon the RIP for printing, but it is hard to work with color accurately whit the added Red. Do you know of any way to remove the color shift?
I am on a Mac Power book running OS X 10.7.5 with Adobe CS4.
photos that were taken of product for our company website. At first, I converted them all to GIFs with transparent backgrounds, but that was starting to create major lagtime in accessing the site. Now I'm trying to convert the originals to JPGs with a background color that matches the website background, but my background colors aren't consistent, and I can't figure out why.
I started by taking the color I was using on the website and used that to paint the background of the photo. When I loaded that JPG on the site, the color did not match the page's background color. I used the eyedropper on the picture and found out the color was no longer the same color I specified (it wasn't an issue of eyeballing it incorrectly,... I had entered in the exact R, G, and B values).
I did some further testing with the "Save for Web" function and various RGB values to see if there was some pattern to the testing. It doesn't appear that colors are being scewed to a value relative to the original color, nor does it appear that the colors are mapping to certain nearby values.
When I had CS3 I would be able to open a RAW image in Photoshop with the ProPhoto RGB color space. I would then change the color space as needed.
In CS4, I am using the 64-bit version, and there is a color shift when I open a RAW image in Photoshop with ProPhoto color space. The color is desaturated.
There is no color sift when I open the same image using Adobe RGB.
I imagine this is something you get kind of often, but I searched around and couldn't find anything that I understood. I suspect I'm just not sure what to search for...
I have experience with Photoshop in general, but not at all with color profiles.
I take my own photos and have been printing them for a while, after editing them in Photoshop. I have my Proof set to Working CMYK. However, whenever I try to Save For Web these same images, they come out looking similarly to if I had changed the Proof to Monitor RGB.
How can I save my images to JPG without experiencing this color shift? I don't want to change my proof to Monitor RGB and re-level if I can possibly avoid it.
Can someone please let me know why I'm getting a color shift (the entire image lightens noticably) when I export an image or animated gif with "Save for Web & Devices...". It happens on PCs and Macs, and with both CS3 and CS2.
I've been using this feature (flawlessly until a few months ago) long enough to realize that there are several settings to adjust the color table, dithering, web snap, etc., but adjusting these settings don't seem to fix the problem. When I use "Save As..." the color shift doesn't occur, and that's been my workaround, but I'm currently trying to save a few animated gifs, which must be saved with "Save for Web & Devices..." in order to retain the animation.
I am using cs6 to make a time lapse video. When rendering this in H.264 format there is a significant color shift. For example green grass takes on an almost cyan look in the rendered file.
I am running Win7 64. My monitors have been calibrated using a Spyder 3 Elite, and color management works perfectly for me in all other areas (printing, etc.)
I am working on a very large poster graphic and am coming across some odd issues, at least odd to me. I'm not sure the reasoning behind it, or if there is reasoning behind it? I must be doing something wrong.
I created a ribbon/wave graphic in Photoshop in RGB color mode then converted to CMYK. I then cropped the large (310.875") canvas in to 4 separate images).
I created a new Photoshop file for each canvas to then begin placing different text and graphics on each. The idea was to have the wave behind the images in the forefront of each poster be continuous and flow from one poster to the next. Once done I saved each poster as a tif and then laid them out in inDesign to verify the transition. To my surprise the color for each wave was off or slightly different than the other.
I'm using a hueyPro to calibrate my monitor.
when I use the "Print Screen" button on my keyboard and paste into Photoshop there is a color shift.
I'm goofing around with Photoshop 7 and would like to scan in a board of a board game. The board is too big for my scanner, so I have to scan it in pieces.
When I scan the board, it won't lie flat on the scanner (because the scanner edges are not flush with the glass). Instead, it's a bit tilted as it runs over the raised edge, and the part that is tilted up (away from the glass surface) doesn't get exposed as well, so the board image shifts from light to dark as it goes from the part closest to the scan head, to the part that won't quite sit on the glass.
When I export an image from LR 4.1 for editing in PS CS6, I notice a distinct loss of contrast and possibly saturation. Overall, the image looks duller and flatter. My working space in both apps is ProPhoto RGB. I use a custom profile generated by a hardware calibrator.
The screenshot below is of the same image rendered in both programs.
And here are my PS color settings:
FWIW, the image generated by Lightroom is rendered identically by Preview.
We're creating an image for a client that will eventually be printed 4c process, and we have to use some very specific CMYK values. However, since we need to use certain layer effects, we need to work in RGB. I assumed that since the CMYK values we use are within the RGB gamut, there would be no color shift when copying from a CMYK doc and pasting into an RGB doc, but I'm apprently mistaken.
I'm not very familiar with color management, since we don't do any heavy duty color work in house, so this is likely a very rudimentary question: how do I keep colors from shifting when pasting from a CMYK document into an RGB document (which will eventually be converted back to CMYK for print)?
I'll take a screenshot of something in my browser, and then paste the screenshot into a new PS document, and suddenly all of the colors have shifted red...a lot. Now, when I save and view the images outside of PS, the colors have returned to normal, but this makes me very nervous about designing in PS, color matching, etc.
I've played around with the Color Management settings, most recently just switching off all Color Management, but nothing seems to fix this issue. To be honest, though, I don't really know what I'm doing in there with those color settings. I thought just setting everything to US Web would fix the problem, but It hasn't changed anything.
When I first installed 8.0 on my older XP machine, I didn't have any of these problems.
I'm TRYING to move over into Photoshop after a happy ten years with Paint Shop Pro. I was doing fairly well finding equivalent tools and techniques in PS until I hit a brick wall. If I work on a file in PS the colors will shift and no longer blend into an existing PSP design.
View 2 Replies View Relatedphotoshop CS2 stoped displaying the red channel correctly on all images. The red channel displays very muted color.
After deleting all preferences of CS2, cleaning out the Windows registry, and upgrading to CS3 the problem still remains.
In CS3 however, the color shift goes away if I drag the image outside of Photoshop's main window.
I have a screenshot of this, http://www.miats.com/tmp/PhotoshopIssue.jpg
Photoshop states that both of the large images are solid R:255 G:0 B:0. However, after print screening the images and pasting them back into Photoshop, it shows that the one on the left is actually R:201 G:88 B:34.
The same thing happens for green and blue as well, though the difference is much less dramatic.
I don't remember changing any settings and my laptop (Win XP, CS2) does not have this problem when loading the same images.
My computer is running VISTA 32bit with 3GB of ram. The graphics card is a NVIDIA 6800.
how LR interprets/presents RAW files. I do understand that RAW files are just sensor data, and the preview that is shown by the camera is how the camera software itself is processing the RAW data into a JPG. Also, I understand that different RAW processors interpret this data slightly differently. That said, I like how my raw files look based on how my cameras (60D and Rebel xsi) show them. The exposure, color, and saturation levels are great and based on this look, they would require only a few tweaks. When I upload the RAW files to LR, initially, the files look the same or very similar as they did in my camera's preview. However, when I click on each file in library or develop, the file will initially, for about a second, show up as it originally came over, but LR will then say "loading" and the photo will get much darker and duller. Why is this? As I mentioned, I do understand that different programs interpret a camera's data differently, but it appears that LR is originally "seeing" the photos as I want them to look and then for some reason is interpreting them to be something different; why will the photo not stay as it originally looks when I first upload it? This is requiring more editing on my end. One other thing I have noted is that my RAW files already have adjustments made to them upon upload (exposure, brightness, etc.) I noted another post that addressed this and indicated that there were settings that I would need to reset to correct this. Is this also why the look of my photos is changing, or is that a different reason?
View 5 Replies View RelatedHow can I change gray scale art to a blue hue'd art?
View 1 Replies View RelatedWhat is the cause of text that I copy and paste not retaining the colors it had? I have many text blocks with large numbers and letters each having their own color and when I copy them in order to paste them elsewhere, the letters/numbers have different colors. For example all numbers that may have been pink are now black.
View 6 Replies View Relatedwhat I need to do to my PDF to ensure color are some what close to original when saving a PDF in Illustrator or InDesign. Yes i understand iPad would be using a different coor management to a desktop computer but surely there is a way to get the colors, brightness closer to original?
I notice that when doing standard and high quality saves in PDF format, the saturation and brightness contrast changes quite a bit, but if I save the image as a jpg its a lot closer.
I was just browsing a car site which seems to be exeriencing a very similar situation with one of their PDFs. When viewing in iPad have a look at how bad this looks (its way too dark) but when viewing on a desktop machine its fine.
[URL]
(If the link does not work go to the main domain, click on vehicles from menu, select captiva5 then click view brochure) to load PDF
Is it just a matter of color proofing using a specific model and drawing back on blownout levels before outputting to PDF?
LR 4.1 RC2, OSX 10.6.8 - when I'm trying to use the develop module with my second monitor, the image initially looks accurate. After a second or two and before any edits have been applied, the images desaturate and look very flat. Images viewed with the second monitor in Library module look great.
View 1 Replies View RelatedFor some reason I'm getting color shift between the Library and Develop Modules.
View 7 Replies View RelatedWith LR4 and a Nikon D7000.When i import that raw in lightroom, the first view of the picture is fine then LR do its "loading" and bang, the picture changes.As RAW is not supposed to be affected by the colorspace My understanding is the embeded preview in the raw is sRGB and LR work in a different colorspace. If i change the camera for AdobeRGB, i dont have the problem and what i see from the camera to the preview then the final result is consistent.But this cause me another problem because i shoot RAW+jpeg, the backup JPEG saved in the other memory card is now AdobeRGB as well and less compatible as everybody knows, for web, print labatory, etc...
I dont have in LR any automatic developement settings.My screen is calibrated with a Spyder 3.
I'm feeling stuck in the corner as i want by backup JPEG in sRGB and n o colorshift in LR.
1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
Just getting used to elements 11 - the tilt shift in the guided edit does not change when I click on the icon, then click and drag. I am sure I am following instructions correctly, but nothing changes when I try to rezone the area I wish to have showing without blur. I could do in operation in the expert mode, but it should work in guided edit.
View 7 Replies View RelatedI have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW. At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR. I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
I recently upgraded to CC from CS5. I work on objects that have multiple elements. Since I am on CC, I am running into an annoying problem. When I copy paste an object with multiple elements, or command/option/shift + drag the object, the various elements shift in z-order.
View 3 Replies View RelatedIt makes very serios color shift. how can I prevent this.
View 5 Replies View Relatedtried several times to shift an object from Photo 1 to photo 2:
identified the object in photo 1, e.g by using the lasso
stored it by edit/copy (or strg/c)
opened photo 2
edit/insert (or strg/v)
object appears in photo 2, but without the frame it was supposed to come with - and by which I could enlarge / minimize / shift it....
made a mistake or software error?
I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB.
View 1 Replies View Related