What is causing the colored noise in the above image? This appears before I do any editing. When I import the image from Lightroom 5.Â
I turn on the Gamut Warning, and it disappears. I know. But then, obviously, the gray from the Gamut Warning occupies parts of the image. I open the image as a 16 bit PSD.
Opening a Canon .CR2 in Photoshop CS6, Camera Raw generates a significant amount of noise or graininess in the image compared with the simultaneously saved .JPG file. This results in the image from the raw file being of reduced quality. I never had this problem using Photoshop CS5.Â
Â
Is this the result of some setting being turned on? If so, I have been unable to figure out which one. The only other possibility is that there is a severe flaw in the latest version of the Camera Raw plugin.
I have low-light photo taken at 1600 iso and I'd like to de-noise it and sharpen it a bit with high pass. Will it matter which comes first?
View 5 Replies View RelatedI am trying to create a star field for this school project. I've been trying to create one using the Add noise feature on a black background. I get to the point were I'm pretty satisfied with the end result. I used some other adjustments like curves, brightness and contrast, and exposure. All of these created a pretty solid star field. However I've noticed two things when trying to save the image at hand as a JPG or apply the image to a new layer. Both instances yield the image reverting back to the initial add noise, as if it adds the original noise I started with when I first began the project and I'm at my wits ends as to why it's doing that.
View 3 Replies View RelatedI hope this is the right place to ask. I have had some people complain that there is often noise in many my photos. The problem is I am unable to see it myself. Maybe it is my poor vision. Mt question is, "Is there a way that a person can make the area of a phot that has noise in it stand out like in a highlite or something making it obvious where it needs removed?"
I am envisioning a software that makes all areas of the photo red where the noise is. I have the software tools that you use to remove it but first I need to be able to see it. If this is the wrong forum for this question, please direct me to where the right one is. Notice, I did not say, "Tell me where I can go?.
What Noise Reduction do you use/recommend for getting rid of heavy noise on
photos?
a good noise reduction plug in to Photoshop, or alternatively a comparable program?
View 5 Replies View Relatedwhat is meant by background noise? i come accross this alot but dont understand it and laso the video filters?
View 6 Replies View RelatedI can't remember reading any tutorials on dealing with noise in Photoshop. Scott Kelby dedicates a whole paragraph in his CS3 book for digital photographers. I need to make a decision on what noise reduction plugin to buy, so if you can reply to thread I can get a consensus of what is being used most.
View 2 Replies View RelatedI am trying to create a "blinged" skater. I have this so far: photo
Everytime I select the middle of the skater (the black) and try to add noise this is
what happens: the noise is gold and white.
I want to make the noise black and white rather than gold.
I recently began creating an image and when it came time to flatten this image, the noise I intentionally put in was softened to a regular glow. I am using CS2 and i used the Layer Style > Outer Glow > and then I added noise with blend mode linear dodge and an opacity of 68%. Anyone know if there is a way I can flatten the image with a way to maintain the noise?
View 1 Replies View RelatedPS CS3 Noise Filter better than PSElements 6 Noise Filter ?
View 16 Replies View RelatedI am trying to create a "blinged" skater.
I select the middle of the skater (the black) and try to add noise.
I want to make the noise black and white rather than gold.
If the circumstances force me to work on images with noise which have to be enlarged, and if I use noise reduction based on noise-pattern-recognition, is it better to carry out the noise reduction before or after the enlargement (and in case the answer is after, which resampling method would resample the image (and thus the noise) best for subsequent noise reduction?)
View 15 Replies View RelatedWhat I'd like to do is remove the noise/grain without blurring the image too much...
View 6 Replies View RelatedI do a lot of UI design and webdesign in Photoshop and as most people I like to apply a subtle noise here and there. I usually do it this way:
First I decide whether I want black or white noise. Secondly I create a new layer and fill it with opposite color. Then I choose Add Noise and apply 100% uniform monochromatic noise. In the end I choose between Multiply and Screen mode according to the noise I want and play around with opacity.
Â
Now I am coding a website in HTML5 and CSS3, which allows me to recreate all elements without unnecessary images and workarounds, but I am not able to create appropriate texture to emulate the noise. For example black noise: I wanted to create the noise as I usually would, just skipping the Multiply blending mode part and rather trying to substitute white color with transparent (and accordingly for shades), meaning I will get document where some pixels would be 100% black, some would be 0% black, and the rest between. In CSS I would then repeat this over some element and change opacity accordingly.
Noise Ninja crashes my PS CS6. What'e even worse is PS CS6 can NOT be restarted without restarting the computer first! As the noise filter in PS CS6 works really poorly, any software that works? I use the 64 bit version. No other problems - so far.
View 9 Replies View RelatedLevel: Newbie  OS: Windows 7 64bit   Ps: CS6
Â
I went through a half A***d tutorial (to make an iPad) which was a huge part of my problem ...
Â
The tut would say to do things that couldn't be done - so I would find an other way ... which I believe created problems
Â
when I was done making the iPad and then tried to Group my layers into some sort of order ...
Â
The Noise (Filter) I used on the Main Shape of the iPad spilled out of its Clipping Mask and onto the BG layer ...
Â
or actually onto every aspect of iPad
Â
Am I assuming correctly that having moved the Layers around and placing them into Groups somehow disrupted the Clipping Mask?
Â
I read that I can make a New Group and then just drag the Layers up to the Folder
Â
However, I couldn't find in the manual anything about what to do when moving Layers into New Groups goes wrong ...
Does CS4 basic have a plugin to correct night time noise?
View 3 Replies View Relatedhaving noise in some photograps taken with my digital camera, because of the noise, is there a way to reduce it, or eliminate it?
View 9 Replies View Related"Cannot complete the reduce noise command in cs2 due to program error." Have uninstalled and reinstalled photoshop but same message appears when I click filter>noise>reduce noise. Same thing happens in filter>sharpen>smart sharpen. These 2 filters used to be working.
View 2 Replies View RelatedIs there a consensus on the best noise removal plug-in for CS 4 32 bit on Vista?
View 11 Replies View Relatedi wanna know which is the best technique to remove noise in Photoshop CS3
View 3 Replies View RelatedJust looking for some 'do's & don'ts' as far as when to use the 'Noise Ninja' noise removal plug-in in one's workflow. The plug-in tutorial writes that noise removal should be used as early as possible in the workflow...especially before any color correcting, cropping, etc. So if this is true, why not write just to use it as your very 1st step before adjusting any/all photos?? I guess my question is: if noise removal is needed, when should you use it? Is there any downside to having this as my first step in the workflow before taking the photo into CS3 RAW for 1st adjustments?
View 1 Replies View RelatedI'm using photoshop for vision research and am applying gaussian noise to black backgrounds using Filter -->Add noise --> Gaussian 20%. In CS2 a new random noise pattern would be generated each time I added noise to a different black background -- and this what I needed. But in CS3 & CS4, the same noise pattern is generated every time, and I need to have it generating different noise patterns. Is there a switch I'm missing or is this just something that was changed in CS3 and CS4? This issue occurs on my Mac and Windows CS3 and Vista CS4 machines.
View 21 Replies View Relatedwhen I lighten up a photo certain dark areas (not all and not all the time) get very grainy / noisy looking. Is there anyway to remove or compensate for that? Unfortunately, I was shooting in very low-light level conditions and I could not use a flash (shots of horses). I would like to be able to get clean 8x10 prints out of these, but the grain is so bad.
View 2 Replies View RelatedI'm struggling with a stock agency on a few images where the rejection is for "Artifact" and "Noise". First, let me ask - are these the same? They sometimes list these problems independently. They state that "camera setting and RAW processing are the likely cause". I don't "think" my camera settings are the problem - 100 ISO, 16.7mp RAW's.
So the question is this; how do I tell if I have these issues in a file? They are inspected at 100%.
Next, if I have these issues, what is the best way to fix them? I know of the noise reduction filter, however, not sure of the best settings. Or, should I be considering 3rd party software?
way to remove noise from picture taken by digital camera (particular those taken at low light condition)? These noise are scattered all around the picture. I tried to use the filter -> Noise --> reduce noise function, but the result is not good. There are still plenty of little grains when viewed at 1:1 scale. If I apply the neutralize, the whole picture will be blurred out.
View 2 Replies View RelatedNoise reduction in Photoshop Touch does not work. Move slider and nothing happens. I also have Photoshop Express, and noise reduction works fine with it.
Is it me or the software. Used on iPad mini.
Working on a night shot of a building and processed through ACR7.2 and forgot to reduce the noise - and opened in Photoshop. Went to Filter/Reduce Noise and immediately get wierd banding in the window blinds. This banding is there regardless of the noise reduction settings and could not get it to go away - See attached screen shot of before and after applying the filter. So I went back and opened the file again in ACR7.2 and applied the Noise Reduction there and bingo, noise level dropped and looked good with no banding. Looks like the Noise Reduction capabilities in ACR7.2 are way better than the Noise Reduction filter - but surely the banding should not be there; especially if images do not get processed through Camera RAW.
Â
Running latest version of Photoshop CS6 (latest patches applied), Windows 7 x64 16GB RAM, Intel 4000 with latest drivers installed. Camera file was ACR2 from Canon 5DMKII imported as a DNG file - then opened in ACR 7.2
Â
Before Image Opened in Photoshop before applying the Noise Reduction Filter. After Image in Photoshop after applying the Noise Reduction Filter. Seems like a bug to me .By the way, the screen captures are from the image viewed at 100%.
I have a Canon EOS 450D and started taking photos in RAW and edited the photos afterwards with the PS RAW editing function. Often, the result on the "RAW screen" is good enough and I do not open PS CS5.
The following happened (I edited nearly 100 photos like this, but printing them was a disaster!). Image during editing in RAW:
Settings:
Setting under image in RAW:
Printing photo- a scan:
Watching the photo for the first time in PS:
What went wrong? Did I sharpen too much and if so, why did the picture still showed very nice on the "RAW" image? The size of most of the photos are more than 10 MB.