Photoshop :: CS6 Printing Whites As Yellows?
Apr 16, 2013
When printing from photoshop CS6 whites are coming out as yellows.I print as follows;
Color Handling: Photoshop Manages Colors
Printer Profile: EPSON Stylus Pro 4800
Normal Printing
Rendering Intent: Absolute Colorimetric
(I need these settings as I print from sepcific palettes)In Print settings I print on Custom Mode with no color adjustment.I have recently upgraded to Photoshop CS6 and believe there must be an option somewhere to do with white handling I've missed.
View 1 Replies
ADVERTISEMENT
Jul 17, 2012
How can i accentuate whites and blacks in Photoshop in black and white photos? i tried silver evef 2 and there is a feature to boost whites and blacks
[URL].........
levels and curves don't give me the same results. I tried to create a luminosity mask of whites with selective color. Is there a great skill to boost whites for example?
View 8 Replies
View Related
May 6, 2011
I am doing a product shot, and the company's spec sheet advises that the brightest (or maybe lightest??) whites be 240, and the blacks around 30. I think this has something to do with levels, and not having blown-out whites or clipped blacks, but how do I check that those are the levels in my final proofs?
View 8 Replies
View Related
Apr 14, 2008
I know if you Control Click on the RGB channel in the channels palette that
you basic select all of the whites in the image. Is there any way to do this
for the blacks and mid-tones? If no, does any one know of a way to do this
(plug-in, etc.)?
View 1 Replies
View Related
Oct 21, 2011
I have a set of photos, taken a while back. They're closeups of the stages of a craft process, and not easily reshootable.
I was with the craft, I didn't notice that the day was passing, and that the light I was shooting with was varying, and I didn't do a manual white balance for each shot.
Each photo on its own looks "OK", but when I tried a montage, the white balance differences between the shots was UGLY.
So - I don't need accurately calibrated shots, but I'd like the colorspace of all the photos to be as similar as possible, so that identical physical objects have the same in-image colors.
There are several areas in the photos that are of the same (physical) item that could be used to drive a calibration/matching process, but they're not white/gray/black.
So - how do I match up the colors? I've tried to botch at it by hand editing curves but it was tedious and error prone.
View 2 Replies
View Related
Jun 29, 2012
I have a set of icons which are a specific color (blue) with white text on them. I want to change them to be a different color(turquoise) and a fair bit darker, but I want the text to remain white. When I use Colors -> Hue-Saturation, I can get the desired color I want, but the text ends up looking grey because I need to bring down the lightness slider to achieve the color I want. Is there a better way to accomplish the task I need without affecting the white?
View 3 Replies
View Related
Jan 5, 2013
I have somehow lost the option of adjusting highlight, shadows, and whites on my Develop:Basic panel. What happened to those adjustments and how do I get them back?
View 5 Replies
View Related
Feb 26, 2013
Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies
View Related
Oct 2, 2006
i have an image that is 28' wide by 60' high. i have to tile print it, but i have to print it out on film (see thru acetate). it has to be able to print at 1400 dpi. i know how to print at 1400 dpi on adobe photoshop, but i dont know how to tile print on that program. i have the image now in illusrtator, because it lets me tile, but i cant get it to print out for film (1400 dpi). im using a epson 1280 printer.
i really need to be able to tile print this in high resolution on film. anyone know what i can do??
View 1 Replies
View Related
Oct 30, 2012
How do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies
View Related
Aug 29, 2004
How 2 color printing and 4 color printing will work? What are the designing conditions for 4 color printing and 2 color printing?
View 4 Replies
View Related
Mar 22, 2012
Our site uses safecom as a print solution and all the PC use an HP universal driver which works fine.Macs on the other hand throw up a message, Could not print <filename> because of program error.
I've played around with different print drivers and still have the problem.
View 1 Replies
View Related
Aug 17, 2012
Having problems printing from Photoshop cs6 the colors are way off. How do you collaborate the printer to print whats on screen?
View 3 Replies
View Related
Jan 23, 2013
I'm using Adobe Photoshop CS6 and when I print photos with it, the prints have small yellow ting and colors are saturated and dark. When I print the same .psd file in Lightroom 4, the colors are perfect and match to the monitor. I've calibrated the monitors and printer with Colormunki and they work perfectly with Lightroom 4. I take pics with my camera in AdobeRPG colorspace. I export pics straight from Lightroom to the Photoshop and I use AdobeRPG mode in photoshop too. I've tried the sRGB mode but no difference with colors.
Settings when I print: Normal Printing - Perceptual. I let Photoshop handle the colors and the profile is the same that I use in the Lightroom (I use the Perceptual intent in Lightroom 4).
When I use hard proofing with Photoshop and add to custom "AdobeRPG 1998" (same as in the Lightroom). The yellow tint gets harder and more harsh.
View 1 Replies
View Related
Aug 21, 2009
in Vista, the 'Print Setup', 'Print', and 'Print One Copy' commands are grayed out if PS CS3 is run i as an administrator. I found a thread here where this was discussed but there was no resolution.
View 8 Replies
View Related
Apr 15, 2003
i need to print w/ the bleed, registration points etc. i have gone to print & preview, but my bleed is not showing up on my print and i don't know how to fix it?
View 1 Replies
View Related
Feb 17, 2008
I have to create a poster. The poster will have text and images on it. The problem is that the poster has to be a1 which is much bigger than i have ever printed before. tell me Which settings i should use when making the new file RGB? size?
View 2 Replies
View Related
Nov 11, 2005
I have a Canon i250 Printer and would like to print my photos onto Kodak Glossy Photo Paper but it says on the packet only for injet printers and my printer is Bubblejet. So would i be able to use that paper?
Also i found some photo paper around the house but it is only for Hewlett Packard printers but i tried it in my Canon printer and when it comes out there is so blobs its hard to explain like there is dots with white around it is this because i am using the wrong paper?
View 5 Replies
View Related
Oct 24, 2008
I have two images... I can make this one if needed 770 x 270 i want to print one image on each side of a bit of paper... how would I do this??
View 2 Replies
View Related
Jun 18, 2009
I have just started using CS4, having upgraded from CS2. When I go to print in the print dialog box and go to the Printer Profiles box I am unable to see or select my paper profiles for my Epson 2200 and R300 printers.
There is a large number of profiles, primarily various color spaces, but only one paper profile for my Epson 2200. There also isn't any arrow or other way to scroll through the display to see the missing paper profiles.
All of the missing profiles are the standard paper profiles provided by Epson either with the printers or from their website. Do I need to reinstall these profiles in some way in CS4 or is there something else I should be doing to be able to access these profiles?
View 3 Replies
View Related
Dec 11, 2008
In CS3 you could print multiple images on a sheet like a photo studio by going to File-Automate-Print Package and in CS4 that option isn't there and I can't find any information on it.
View 3 Replies
View Related
Apr 29, 2007
Tried to print a 10ft panoramic landscape with CS3 on an Epson 1290 with disastrous results. Only prints about 4ft then aborts. Worse still what it did manage to print was 5ft of the the panorama compressed into that 4ft, the width had been compressed by my assessment as much as 15/20%.
Previously had no problems with CS2 so I have had to reinstall CS2 to effectively do all my printing (especially long landscapes).
Even gone to the extent of reformatting computer and reinstalling everything from new.
So Adobe can you please tell me what good is it or the point in releasing a program that you cannot trust to print?
I don't trust Photoshop CS3 to do any of my printing anymore, not even A4 or A3 sizes.
View 39 Replies
View Related
May 7, 2008
I use photo shop for everything on our company, from designing websites and multimedia screens to art that will get printed.
The company uses a SAVIN C3535 for our printed material, and it used to get us really good print quality...until now. When I print stuff directly from Photo shop it creates a weird "cutout" effect on the pictures (people and logos mostly) and creates like a black "noise" surrounding any black text in my art. Color text and shapes print out fine. Anything with tones looks bad. If I send the same file to print to different printer, it looks awesome! Obviously it is the printer...Any suggestions on what I can do to fix this? i already contacted the printers' tech support, but they haven't been able to fix it (they keep blaming photo shop)
View 2 Replies
View Related
Nov 13, 2008
This is with resample off, so the final product will be printed at 200ppi. As part of our (forensic) workflow, we print images at 500%. There are different ways of doing this, but some people in the office specify this in the Print Preview Pane, whereas I do it directly to the image in PS before going to print.
After switching to CS3 from CS, it was noticed that 500% for a 1000ppi image (physically less than 36mm X 24mm at 1:1) was being limited to a bit less than 400%. An error box would pop up saying the value must be between 0.00% and XXX.XX%... and it would automatically select the maximum in the range.
For a 1000ppi original image, the upper range would be around 370%. I tried it with a 2400 ppi image (5MB) and was limited to ~150%. Apparently this is not a specific number, but some sort of resolution-based maximum.
The printer used for output doesn't appear to matter as we've tried a couple of different ones.
Is there some sort of maximum percent of image size allowed for printing, based on resolution that can be selected in the Print Preview Pane?
View 1 Replies
View Related
Jul 21, 2005
I am transitioning from OS 9 to OS X and am running into some problems with printing.
I am using a G4 mac DP, 1.25 Mhz. and an Epson Stylus Photo 820. and I'm running both systems on my G4.
I had been using PS 7 with OS 9 and printing out pictures without any problems but I recently downloaded the Try out version of Adobe PS CS2 and decided to use it to print out some of the pictures on OS X.
In the Print Preview the options were set to let the printer determine colours. When that was OK'd the next print page showed only the printer and the presets which said Standard.
The problem I'm having is that the picture takes less than a minute to print and is of poor quaility compared to printing the same picture on OS 9 with PS 7 which takes maybe 2 or 3 minutes. The printer is printing at 300 dpi on OS 9 but i'm not sure what it is printing at on OS X. Not sure how to check that with OS X. Like I said earlier I'm not that familiar with OS X yet.
View 4 Replies
View Related
Jul 24, 2008
if I understand PPI and DPI correctly. PPI dtermines the actual reoslution of the picture and DPI really determines how much ink the printer will spray per inch as it prints out.
So I guess I would like to know if anyone has suggestiosn to these three questions.
1. When scanning an image in, does DPI Actually refer to PPI? If so, what DPI/PPI shoudl I scan at.
2. In photoshop cs3 does the "Pixel Demenssions" section refer to PPI and the actual DPI section refer to the DPI setting for the printer?
3. What would be the best PPI and DPI settings for printing out the 3foot by 2foot poster?
View 1 Replies
View Related
Jul 12, 2008
I have a document thats currently in CYMK color mode, and I'm having difficulty finding satisfactory colors. I was advised elsewhere to abandon CYMK. I therefore want to convert my image into to LAB color mode. I've read that converting from one color mode to another can cause layers to look funny, however I need to retain some of my layers... Do you guys typically have problems with this? In retrospect I should have STARTED in Lab... Seems that converting from CYMK to LAB wouldn't be as problematic as converting from LAB to CYMK...
The key question is this: will my printer (Epson R800) even be able to print in LAB mode? I thought yes, or at least closely... because it has much more than CYMK to work with... it has these cartridges:
#1 Blue UltraChrome Hi-Gloss Ink Cartridge T054920
#2 Cyan UltraChrome Hi-Gloss Ink Cartridge T054220
#3 Gloss Optimizer UltraChrome Hi-Gloss Cartridge T054020
#4 Magenta UltraChrome Hi-Gloss Ink Cartridge T054320
#5 Matte Black UltraChrome Hi-Gloss Ink Cartridge T054820
#6 Photo Black UltraChrome Hi-Gloss Ink Cartridge T054120
#7 Red UltraChrome Hi-Gloss Ink Cartridge T054720
#8 Yellow UltraChrome Hi-Gloss Ink Cartridge
Finally, in the print screen menu should I be
"letting photoshop manage colors" or letting "printer manage colors"? Do you guys have any other tips on how to tweak printer/photoshop settings/preferences to maximize the accuracy of my colors? Would I possibly be better off just using RGB?
View 4 Replies
View Related
Aug 4, 2007
Im having a rather simple problem but of course with Photoshop nothing is simple.. I am wondering how to print a multiple page document, my printer will print odd # pages as the front and even # pages on the back side... so pretty much I just need to know how to print two documents at once on photoshop?
View 3 Replies
View Related
Mar 19, 2004
I have been assigned to make a DVD cover, and I am just wondering what would be the best printing options. I'm wondering what kind of paper would be best, any sizes, files, resolution, the works... Haven't really done this so I'm just a little confused.
View 4 Replies
View Related
Aug 10, 2008
I'm making a billboard ad for a friend using CS2. The dimensions are around 14'x6'. The printing company hasn't been much help for me. They usually print basic vector graphics and they don't worry much about distortion. The most they could tell me was that they print at 150 DPI and that I can make my image at half size and they'll blow it up.. I'm very worried about distortion as it is an elaborate pixel based graphic.
However, I'm having much trouble working at this huge resolution. Major disk errors and massive loading times between tasks (even with 200gb free disk space and 4gb ram). So, I'm wondering is there any lower resolution I can work at without losing quality here? The printing company hasn't been very helpful here, and I'm having trouble avoiding distortion even in photoshop alone at this rediculous resolution. Thanks if you can offer any advice here, I just feel as if I'm making it harder for myself than it should be.
ps I know how to work around the disk scratch errors,
View 8 Replies
View Related
Aug 24, 2012
I have two systems. The first a windows 7 32 bit quad core with 8 gigs ram cs4 is installed on this sytem. Time to print a standard job on an epson 4800 (which includes hitting print, selecting options for the printer and then being able to close the file and open another) less than a minute.
Recently installed cs6 on new windows 7 x64 intel core i7 system with 12 gigs ram. I have used both cs4 and cs5 on this newer system. Both ran the same file in under a minute to print as outlined above. Once I installed cs6 however the print time ( as defined above) for the same file above has now gone to 22+ minutes. on cs6, 18+ minutes on cs5 and approx the same for cs4 (all versions of CS are 64 bit on this system)
If there isn't an update to cs6 soon, I presume I will have to de-activate cs6, cs5 and cs4 and then re-install cs4 and cs5 to take advantage of my faster system is that correct?
View 3 Replies
View Related
