Photoshop :: CS5 - Logo Pixelation

May 14, 2013

I only have PS CS5. I made text logo with a transparent background for a website and saved it as a png. The person building the website can't seem to resize it without it becoming pixelated.

View 4 Replies


ADVERTISEMENT

Photoshop :: Size Down Without Pixelation

Sep 2, 2013

OK, so I know there are a ton of posts on here about resizing images in Photoshop (and I have read them all!), but I am still completely stumped! I use Photoshop CS6 and my workflow goes as follows: Open image in Photoshop, edit, change to 8-bit, change to srgb, change image size to 960 at widest side (scale styles, constrain proportions, and resample image checked), change to 72dpi, output sharpening. My outcome is to have images that are sized properly for Facebook (I have researched the correct dimensions) and come out CLEAR!! Mine however, always look pixelated/fuzzy. I see many other photographers images on Facebook and they are super clear and sharp.

View 13 Replies View Related

Photoshop :: Zoomed Pixelation

Sep 26, 2005

I have regarding showing pixels on an image? I want to do a series of images that are sharp in the centre and display no pixels (ie a 'normal' sharp photographic image) but that gets more and more 'pixilated' towards the edges so the the size of the pixels increases towards the edge until they are very obviuosly pixelated. I've tried using the mosaic sub filter but that leaves all the visible pixel 'blocks' the same size and I want them to get bigger towards the edges.

View 6 Replies View Related

Photoshop :: Pixelation On Edit

Apr 23, 2007

every picture I edit turns up pixelated. Whether I crop, adjust color, or anything.

So, have I benignly made an adjustment that is fudging things up.

View 7 Replies View Related

Photoshop :: How To Solve Pixelation,

Nov 4, 2008

I have created a background on photoshop which prints out fine but when I view it on the screen on view it in flash where I want to use it for a background, the edges are all pixelated, my dimesions are 16:9 so I did 16cm by 9cm.

View 6 Replies View Related

Photoshop :: Simple Pixelation... But How?

Jun 11, 2006

I've switched my site over to a Wordpress publishing system and am working on modifying one of the themes. I want to incorporate the old pixel design of my site. On the header image I used a Photoshop Tutorial to achieve the effect I wanted. I have since misplaced the tutorial and cannot locate information on how to repeat the desired "cross stitched pixel" effect.

View 6 Replies View Related

Photoshop :: CS2 Excessive Pixelation

Apr 28, 2009

I'm having a problem with excessive pixelation when using photoshop filters and masking.  I've done this process 100's of times, and now this editing technique is creating patches of pixelation.  Technique wise, I am on a second layer; I've applied the diffuse glow filter; then I mask the layer; select specific areas I do not want glowed; feather the selection; and then I brush away the effect from my selection.  Results wise, the feathered areas and the brushed away areas appear to have holes or patches of the background layer coming through.  Usually this is a smooth transition look.  Now it's patchy and overpixelated somehow.  I'm getting the same affect if the picture is jpg or psd.  It is also doing it with just basic curves.

View 1 Replies View Related

Photoshop :: Text Pixelation

Aug 19, 2009

When I print this out or increase the size of the document on my screen, the text is VERY pixelized. Even the larger text at the top. Is there a reason for this, and if so,

View 4 Replies View Related

Photoshop :: Pixelation :: Image To Clear Up?

Apr 29, 2008

I Have an old picture that is pixelated that im trying to clear up ...

View 1 Replies View Related

Photoshop :: Can CS3 Fix Pixelation Due To Bad Lighting From ISight On A MBP?

Nov 9, 2008

I'm having trouble putting a sample pic here so if some generous person want's to take a crack, Nothing racy, not even a person, it's part of a lamp with a door.

I have a macbookpro with a built in iSight camera. I recently took some pictures but they lighting in the room was bad and they are not that good. They are not clear and slightly dark.

I have been able to make them brighter but the sharpness makes it look like one of those pictures made up of a million smaller pictures.

Is there any process in photoshop CS3 to improve the quality/clarity on these pictures?

I don't expect magic from photoshop, but I was hoping that it had features built in that would make it a better picture.

I tried NeatImage, that seemed just to blur the picture slightly. That took away the pixelation, but it was like looking at the picture through a shower door.

View 5 Replies View Related

Photoshop :: How To ZOOM And Eliminate Pixelation

Aug 18, 2007

how to zoom in on an object, and then smooth out the pixels so I can see the object clearly again,

View 5 Replies View Related

Photoshop :: Creating Pixelation Effect

Mar 4, 2004

does anyone know how to create a gradual pixelation effect? for example one end of the image you can make out the individual pixels, and gradually the image quality improves until you have a high res look.

View 2 Replies View Related

Photoshop :: How To Enlarge Digital Photos Without Pixelation

Aug 19, 2012

enlarging digital image without pixulation

View 6 Replies View Related

Photoshop :: Pixelation :: Sharpening The Smaller Images

Sep 7, 2006

I am working on the logo for my company's website. Heres my prob. at 100% this image is fine, but every time I resize (smaller) I end up with pixelation / fuzz on a couple letters (Particularly the P).

This is my original, click it because otherwise the "dot" is pixelated.

This is my resize:

How can I go about sharpening up the smaller images so the text entities look as good as the big image? Is there some trick to resizing that I dont know? I feel stupid asking about this it seems like I know how already and just can't remember.

View 12 Replies View Related

Photoshop :: Pixelation - Making A Thumbsize Image

Aug 11, 2006

I have done a photoshop design (640x480pix tall@150dpi) and i need to make the image into a 100x70pix thumbnail gif at under 4kb.

Obviously the design just pixelates when i change the size and i have tried everything to try and stop it but it just won't work.

View 1 Replies View Related

Photoshop :: Enlarging Certain Part Of Image Without Excessive Pixelation

Feb 19, 2012

how to increase the size of a picture without it getting too pixelated to identify what the image is. The problem I am having is I had to take a screenshot of a picture online and I need to identify specific wording on a small item in someones hand. I tried clicking on resize image and unchecked re-sample image but that is not working either.

View 9 Replies View Related

Photoshop :: Netscape Logo Replaces PS Logo

Jun 10, 2008

when I browse image files I find that the Photoshop/Adobe logo has been replaced by the Netscape logo. When I attach a file in email the N-scape logo is there by file name/number not Photoshop logo. Anyone know why or have this issue?

View 5 Replies View Related

Photoshop :: (CS5.1) Free Transform And Warp Tool Causing Pixelation And Quality Drop

Dec 3, 2012

When I free transform and warp a layer to lie flat, sometimes I'll get this harsh pixellation at one end of the layer. It doesn't appear while I'm doing the warp, just suddenly coming up when I hit enter to apply the transformation.
 
So for example, Ill be transforming this grid, which is originally about 9x this big.So when I''m running the transformation/warp, it looks like this Not great, but at least most of the lines are still intact on the left and back (the right side is basically fine looking) But once I hit enter, I get this And now like, half the lines I did have are gone, and what's left is super pixelated.
 
Is there an interpolation setting I could be using? Is it something unavoidable from how distorted I make the layer?

View 8 Replies View Related

GIMP :: How To Save PNG Without Pixelation

Jun 5, 2012

Trying to change color on a simple png image, and when I save it comes out rough around the edges.

I've included the original (on top) and the new (on bottom).

Literally all I've done is paint bucket fill with the new color.

View 1 Replies View Related

Photoshop :: Enlarge Image Of Multiple Intersecting Low Resolution Contour Lines While Avoiding Pixelation

Feb 28, 2012

Problem: How to enlarge (100 times) image of multiple intersecting low resolution contour lines wile avoiding pixelation?

Simple answer: It can't be done.

Second thoughts: Well, under some circumstances it can be done... sort of. For example if lines are orthogonal to begin with then simple re-sample to nearest neighbor algorithm will do fine. If lines are simple enough, then tracing them with pen tool and recreating the original lines at higher resolution by stroking the paths with a brush will do also. Also if original lines are smooth and thick enough then some re-sampling, blurring and leveling can work (anisotropic diffusion filter may work) but will produce smoothing artifacts at corners.

From what I can see the problem boils down to creatively converting the original lines to vectors (paths / shapes) and avoiding the whole messiness of raster anti-aliasing. But here we face additional problems: Adobe trace engine is not smart enough to recognize geometric shapes, intersecting lines, straight edges, orthogonal lines and mathematical curves - just try to trace a font and you will end up with a baggy monster. Additionally, it appears that in Photoshop center-line trace is not possible and you are limited to outlines.

View 9 Replies View Related

VideoStudio :: Severe Pixelation Of MP4 In Preview?

Jun 5, 2012

I have this problem in X4 and also in X5. When I load MP4 files from my HD camcorder I can preview the clips fine. When I drop them into the timeline, and play the project, the clips are mostly pixelated. When I open other projects that I created in X4 last year using the same type type of mp4 files, I see no pixelation in the project preview. All of these mp4 files are using smart proxy.

View 5 Replies View Related

VideoStudio :: Pro X3 - Jerky Movements And Pixelation

Nov 15, 2010

I am using a trial version of Videostudio Pro X3 and am experiencing some difficulty producing good quality DVD's & video files (via share->Create Video File).

My original video has been captured from an 8mm camcorder and is good quality. The file type is MPEG-2 TS Video & is 2.2GB.

If I import it into the timeline, select Share->Create Video File->Custom and set the video data rate to 8000kps
my resulting mpg file has overall good quality but there are some very jerky movements and pixelation.

These are not present in the original mpeg-2 file. I get a similarly poor result if I select Share->Create Disc which starts up DVD Factory and burn a disc

However, if I have nothing in my timeline and select Share->Create Disc which starts up DVD Factory, add media, selecting my MPEG-2 TS Video file and then burn a disc. The resulting disc is excellent quality with no jerky movements or pixelation.

However, this isn't much use to me because I want to edit my video but seems to prove that something strange is happening in VideoStudio Pro X3 or my use of it.

View 9 Replies View Related

Photoshop :: Swap New Logo For Old Logo

Apr 22, 2009

I have a .pdf that I want to use in a presentation next week. The problem is, since we last used this .pdf, we have changed our logo. How does one switch out one image out for another? 

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting To PDF Causes Pixelation?

Mar 9, 2011

am trying to implement using a watermark and want to make it easy and fast. I'd love it to be a top layer that is set on all design templates and not something I have to monkey with each time (waste of time).

View 14 Replies View Related

Maya :: Adding Material - Pixelation And Tessellation?

Apr 2, 2011

adding material problem. It looks pixelated and it doesn't appear to be covering correctly. The error message is on the screen but it reads when I add the material: "Warning: Mesh shape extruded surface shape20 has no triangles in tessellation." I'm also rendering it at 300 dpi... and have at 72 as well.

Did I screw up my initial polygon column.Just a simple column design..What you see is just with the standard color (metallic) that comes with Maya. But even with my own texture stock material it doesn't work which you can see in the column closer to the screen.

View 1 Replies View Related

Illustrator :: How To Export 72 PPI Image To TIFF Without Pixelation

Aug 25, 2012

I am designing images for printing on vinyl, with the print shop requiring 72 ppi .tiff files.Producing the file in Illustrator (.ai) and printing it produces a clear image on paper without pixellation.
 
However, when I export to .tiff @ 72 ppi, the result is heavy pixellation which I cannot print.How do I avoid this pixelation when exporting to .tiff in Illustrator CS6?

View 6 Replies View Related

After Effects :: Getting Pixelation When Add Camera Layer To Imported MOV?

Jan 20, 2014

I've created a composition with animation in After Effects.  Because of the complexity of the composition and its many layers, adding a 3D camera layer to it spawned a whole lot of issues with the wipe effects I had on the pre-existing layers and movement of my layers.  So I rendered the composition without the camera layer, nested the .mov into a new comp and added a camera layer.  The animation works great but I'm getting a lot of pixelation.  Highest HD settings, full resolution, preserving quality of layers when nesting and not sure what's happening. 

View 8 Replies View Related

VideoStudio :: Pixelation After Create Video File Phase

Feb 10, 2006

Nature of the problem: Following the recommended procedure, I get to the phase where you created a video file. However when I go to preview the file, its badly pixelated.

Properties of your source files: All are clips from unprotected DVDs and play fine when captured.

What devices are involved and their mode of connection: Direct from computer's DVD player/recorder.

Project Settings: As listed under recommended procedure.

Output format: Mpeg to be burned to DVD.

PAL or NTSC: NTSC
Error Codes (if any): None
System information: AMD 64 3500+ w/ Dual SLi 7800 GTs and 2 GB of RAM.

I suspect that its a setting somewhere that has been changed because on a prototype I made using some of the same clips it worked fine. Then just stopped and started pixelating out of the blue.

View 9 Replies View Related

GIMP :: Degradation Of Image After Extracted From PDF - Pixelation Of Lines

Jan 23, 2013

Basically, I am trying to process a simple drawn map that was scanned and saved as a PDF. The scanned image is old so the paper is yellowed and they scanned it in high res color even though the image is black and white (well, blue ink actually). I just want to make the background white and change the blue/black lines to solid black lines that retain their clarity.

Here is a portion of the image:

The left is the original and the right is what I WANT, but cannot, achieve.

My biggest issue has been pixelation of the lines. I just can't get it smooth like in the right image. I've tried all sorts of filters - blurs, smooths, sharpens etc.. Part of the problem is also the degradation of the image after I extract it from the PDF.

View 6 Replies View Related

GIMP :: Pixelation Occurs When Make Images Smaller?

Jul 11, 2011

I am making an image smaller (from 1200 pixels wide to 700), and no matter what I try it always turns out pixelated. I hate it! I just want the size of the image to get smaller without compromising the quality of said image. Here's what I've tried:

- Saving to different formats before resizing (TIF, PNG, etc)

- Changing the X and Y resolution from 150, to 300, even 900 before resizing. It seems to have no effect.

- Changing the interpolation from cubic to the others (the others ones all look worse)

I am at a loss! I am using "image/scale image" to resize, by the way. And the original image was a 1200-wide TIF. I don't see why I'm not able to increase the number of pixels while making the image smaller to maintain the integrity of the original image.

View 3 Replies View Related

Illustrator :: Diagonal Jagged Pixelation With Pen Tool And Sheared Typefont

Jan 12, 2014

I'm in the midst of making a type based logo right now and I sheared it to give it a bit of a diagonal edge. However, the diagonal lines are now noticeably pixelated and jagged. What I did was type out the name in the logo, then created outlines for it, then sheared it. I went over some of the lines with a pen tool stroke but it is still coming out the same. Here is my logos. The vertical diagonal lines in the E, K, R and I's are especially noticeable.
 
This is my own personal music producer logo and I am pretty green with illustrator. So how do I make it as clean as this [URL] or some of these [URL].

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved