Got started with doing some picture editing and now I have this solid black image around all images. What is this area called? Backround, mask, border, window color, frame, pane, what? And how do I get rid of it so I can have white or light grey. It is hard to work with this black backround. I will see if I can attach the Print Screen for this issue.
I guess I can't add the attachment.
I was currently in a game (im only 16 >.<) and i noticed someone put a spray on the wall of a character in this game. I am fairly new to photoshop but I use it enough at home and in my votech school to know a bit of it, the problem is The character had no backround. When I try to make an image like this when I save it, it comes out with a white backround. How do you cut an image so when you open it there is just that image no backround behind it?
View 5 Replies View RelatedI'm trying to creat a simple layer mask and no matter what I do, the image has a white backround not a transparent backround. Here is what I'm doing.
open my image
create a layer
using the lasso, I cut out the image
select "add layer mask"
clean up image
save as aTIFF file
The backround looks transparent then but when I bring it in to Final Cut
Pro, it has a whit backround.
What makes this all the more frustratinf is that I've done it MANY times
with no problems, but now for some reason I'm getting that white backround.
I don't think it is a FCP thing. I think I have changed some setting in Photoshop
but I can't figure out which one.
i've created a backround. I know it's very basic stuff. Just wanted some feedback on what you thought of it.
View 2 Replies View RelatedTake a picture of a car, and say copy just the wheel and stick it in front page.
the problem i have at the moment is that im getting the background comming through,
I would like to create a shiny platinum backround for a video I am producing.
View 5 Replies View Relatedhow do you make your picture NOT be a square with a white backround? because i want there to be NO backround, and the shape of the picture would be the shape of what i drew. but whenever i look at it. it has the white backround still there, and its shape is a square, rather than the diamond shape it is. Help? i only have one layer
im using photoshop cs3 Extended
I have two images which are attached one has a blue border around it which is the end product, i have another image i need to add the same blue border to, again im not a designer im a Programmer out graphics designer left us recently so now i have to pick up the pieces until the new designer starts the dimension for the new image needs to be width:199px and the height is 122px
The contact-us image is the end product, the bridgnorth is the image im trying to add the blue rounded corners to, again at w:199px and h:122px
I'm making a signature for another forum and this forum has interchangable backround colors so I was wondering how I could make my convex image blend in with whatever backround its put against.
I just need to take a white backround away from some graphics i made in flash heres a pic of what i need to do.
I just simply want the white backround gone, leaving my text and a transparent backround (I started the file choosing transparent backround)
Im trying to put my friends record label Logo in the backround of a pic of him (both the same size ..but the logo like transperant ) ... I know i have to create 2 layers and lower the opesity of the Logo ...
View 3 Replies View RelatedI want to create a border around my images with rounded corners.
How can I do this in PS?
In PSE10 if it is possible to select multiple images and put a simple border around each of them ?
I use PSE10 to re-size multiple images and, further down the track, I then drop the re-sized images into word documents but I'd like to re-size them and border them.
I have been trying to add borders to my jpeg and png images.
View 4 Replies View Relatedi would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
I'm creating a cover sheet for a drawing set, and I would like I add some PDF images to it. I had no problems x-refing them into the sheet, but because all images have to be assigned a layer, all of the PDFs are bordered by a line of that layer's weight and color.
I tried to assign the layer "do not plot", but the images don't plot either when I do. Is there a way to x-ref a PDF image into my sheet and prevent the border line from printing? I'm using AutoCAD 2010.
Open Xara Designer 7 for Windows - demo version.
1) Create a solid block of colour at an integer coordinate (say 0,0).
2) Make it an integer width and height (say 128 x 128)
3) Export
4) Choose '.png' (or '.jpg' - the same effect will manifest)
5) Zoom into the preview and see the weird discoloured edges produced
Alternatively, do the same thing with 'Create Bitmap Copy' and observe the same results.
I'm aware that if you have non-integer sizes/positions it anti-aliases, but this isn't supposed to happen if you rectify these.
[Edit: I think I found out what it was: on my Pro version, I have the option to minimise anti-aliasing, which might well be the issue. Oddly, I can't reproduce the problem at all on my Pro version, but only on my brother's demo version!]
When I insert aerial photos into Autocadd 2002 or civil 3d 2011 i cannot get the border to disappear. I want them to plot seamlessly without a border or white line between the photos.
View 3 Replies View RelatedI am using LR 4.1, also usis PS CS5.
Any user who uses Facebook to showcase image galleries knows that Facebook changes how images are displayed from time to time. One month it will be on a black background and the next on a white background. And then they put overlay's on top of your images and they change things around whenever they wish. There is not rock solid consistency from Facebook on how they display your images across devices or over time.
What I am trying to do is to add some consistency to how my images are displayed by adding my own border to my images.
Ideally, I would want Lightroom to add a border for me based on some setting under the export manager. But as far I know there is no setting to do this? (Why doesn't lightroom have any border options anywhere yet for anything it exports? This would be relatively simple I think.)
Here is the only way I know how to solve my issue.
First, my other considerations: I want to keep my original images in my catalog in tact and as is w/o a border and with layers if it is a .psd file. I do NOT want to destructively add a border to the catalog images, only the images that end up on Facebook. I also want to add my watermark image to the final image so that it is done as the last step so that the bottom part of my watermark shows my web site address over the white border on the bottom of the image. Using a droplet and the watermark in the same step does not work properly because it applies the watermark before it runs the action, not after.
I have created an action to add a x pixel white border by: Merging (flatten) all layersCreating a new unlocked background "image" layerExpanding the canvas by x pixels.Creating a new white filled layer and moving it to the bottom of the layer's pallet.Adding a 2 pixel black inside stroke to my image layer and adding a drop shadow. I created a droplet from this action and put it in the droplet folder for LR.
Now for the repeated steps that I am going through...
Select the images that I want to write to Facebook.Export these images to a new folder using the droplet.Import the folder of all of these images back into Lightroom.Move the new images with borders on them into the correct LR FB publish service.Publish the photos using the sharpening and watermark settings.Delete the .psd files created in Step #2.
The steps that I would like to avoid are #2, #3, #6
After screen capturing an image, when viewed in the PSPro X workspace, a thin white border shows on the right side and at the bottom.This shows what ever is captured, it wont clone brush or crop out.I have to apply a border to disguise it.
View 14 Replies View RelatedThe problem is almost prehistoric. It dates from the very beginning as far I can tell... whatever image you like to export and whatever its format: png, gif, jpg, there is always one grey pixel border line at the edges. This happens when AA is activated (and deactivate it is not an option if you know what I mean).
I have been reading some threads and no matter what I do: Exporting with or without the background or changing its color... it's always happening.
I Have now installed the trial version of Corel Draw X5 (sp1 included) as I do with every release in order to check out if the problem persist... but no luck for me: nobody seems to be taking care of this issue. I really don't know why Corel is bumping off some many (potentially) buyers like me and many others... why Corel is keeping this issue unresolved year after year, release after release?
Why is the thumbnail border for some images a different color in grid view? Please see the attached image. I can't figure out why the image on the left is a lighter gray than the two in the middle. The far right image is lighter because it is selected.
View 5 Replies View RelatedA friend of mine has been happily using / importing Sony Nex 7 Raw images into Lightroom 4.2 / 4.3 for a long time when suddenly this happens.
Note the grey border all around the image.
This file was imported with: No develop presetNo metadata preset.Process 2012.Various std in the box profiles. Here is a screen paste of the file dimensions (also showing that it is a raw file and not cropped).
All Sony Nex raw files imported to a particular machine (Win 7, 64 bit) demonstrate this behaviour. So, in trying to trace the problem.
The crop tool was checked to make sure there was no crop applied. They grey border is not just a visual border. If you examine the jpg it is actually grey pixels consuming a large percentage of the native 6000x4000 Nex 7 resolution.The Reset button was pressed also,to make sure the raw file conversion was restored to basecamp.History reset.A raw image imported into the same machine / software from a Nikon D300 behaves perfectly.Previously imported Nex 7 Raw images are ok.When the images are imported into two other machines they imports perfectly.Scrapping the preference file makes no difference.Overlay mode was checked, an overlay image loaded and then overlay mode turned off… just to make sure this was NO overlay.Applying a crop and then removing a crop still leaves the grey border.Applying the crop reduces the image dimensions to approx.. 4946 x 3293. Exporting an image to jpg (as shown) leaves image with grey border. This grey border can be cropped out, but it means the resolution will reduce.Exploring various scene modes / in camera crops / resolution settings on the camera does not seem to make any difference.Formatting the card in the camera, take a picture, import directly from card. 3 different cards used. (No change).When using the Catelog on a different machine the grey border remains.
NB Camera set to RAW + jpeg. Jpeg's import without border.
So finally last night…
……. we uninstalled Lightroom 4.3 and re-installed into a different folder. (No change).
I have a drawing that has a white background.
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?
Per the attached exhibit, how to get the plot border to cover the entire sheet border instead of just the bottom left corner.
View 1 Replies View RelatedI want to make a border for something. The border is basically a christmas light border around some text. What I did was I took a picture of one lightbulb and edited it so that I just got the lightbulb (no background or anything...). What I want to do is basically create a border from that single light bulb by alternating the colors of the bulb (like how you can with a brush). Can I create a new brush out of that light bulb? I coulda sworn I've done it before, and there was a lesson on brushes in the book... But I can't figure out how. Or maybe theres a way to get around it by doing a some sort of border?
View 3 Replies View RelatedI am trying to put a colored border on some text.
View 10 Replies View RelatedI'm trying to figure out how to add a simple black or white, solid border around photos. Does anyone know how to do that without distorting the image?
View 3 Replies View Relateddesigning a site that is to be 760 width. It will have a 1px border around it which will be made by html for the table. My questions is do you have the canvas be 758 width and design in that or do you design with a 760 width and draw the tables in the design and just not include it in the slices?
View 4 Replies View Relatedhow to make the picture look like it is floating above the background with a shadow below it. Also how do you add text.
View 5 Replies View RelatedWhen I try to add a border to a picture, everything goes fine until I try to fill it. Fill command fills it with a solid colour that becomes more transparent as it nears the center of the picture. Same thing happens with paint bucket tool and brush tool. Anyone know what I can do to fix this?
View 2 Replies View Related