The Andrew plugins volume 1-19 takes up lots of the position of the filters under the menu,and I gonna know if it is necessary or efficient when we use PS to PS photos?have anyone used it?
View 1 RepliesIs there a way to generate a volume report for a bounded volume surface?
View 3 Replies View RelatedI'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies View RelatedI want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies View RelatedI'm no longer able to control the PP (monitor) volume using my computer volume controls. I've always controlled the monitor volume using my computer volume levels, but starting today, that has changed.
The volume is just playing at the level recorded with no way for me to turn down or up.I performed a disc repair and that didn't solve the problem.
I have Photoshop CS3. I have a new camera, the sony nex 6, which requires a RAW plug in. Will CS3 support the required plug in.
View 1 Replies View RelatedI own Design and web Premium CS6 and Lightroom 5.2 running with NIK and Canon Printer iPF9100 plugins running just fine on a Win7 machine.
I purchased and installed PhotoShop CC about a month ago/ When I start PhotoShop CC from the exec file the NIK and Canon plugins do not show up. If I am in Lightroom and ask to edit in PhotoShop CC the file opens in PhotoShop CC and I can access both plugins. If I am in Lightroom the NIK plugin is available and works just fine.
I have tried putting the plugins in:
NIK:
C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Plug-ins
Canon:
C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Plug-insiPF9100 Print Plug-In for Photoshop x64Print Plugin for iPF9100
C:Program FilesCanoniPF9100 Print Plug-In for Photoshop x64Print Plugin for iPF9100
C:Program FilesCommon FilesAdobePlug-InsCCPrint Plugin for iPF9100
My Canon dealer says the driver and plugin for my printer work just fine on other customers machines.
I upgraded from CS4 to CS6 and have not been able to see my plug-ins in CS6. I tried reinstalling them and dropping them in the CS6 file and still can't see them.
View 5 Replies View RelatedAt first glance PS CC looks pretty cool, downloaded without a hitch and worked first time. There doesn't seem to be an alternative plug-in folder option in Preferences anymore, how do I get CC to 'see' my Nik Plug-ins?
View 2 Replies View RelatedI use Photoshop CS3. All plug-ins used to work before. Now with some of the plug-ins (liquify+vanishing point+artistic for example) the following happens:
- plug-in dialog window opens
- i can make changes and see the preview of them in the plug-in window
- i can apply the plug-in
- then PS displays a dialog saying something like "applying effect.."
- but when that is finished I'm back at my original image without the plug-in effect being applied (nothing shows in history window)
I've tried uninstalling/reinstalling Photoshop but the problem remains. I even tried installing a demo of PS CS4 but have the same problem with that version.
The error appears on the plugins with a more sophisticated user interface, the ones with the basic UI (like gaussian blur etc) still work ok.
like to know that ABSoft have just released their 64-bit version of Neat Image Photoshop 64-bit plugin.
View 6 Replies View RelatedI have an old version of Photoshop (3.0) which I've never updated because frankly it still suits my needs.(which are limited). I realized recently that when I switched from Windows 95 to Windows 98 se a few years back I lost some of my filters, like clouds and mezzotint, ripple, lighting and a handful of others. When I go back and fire up the 95 machine they are there. Also I notice they are in the plugin folder but not showing up on the menu. The best investigation I've turned up is that Photoshop(at least on the 98 machine) says it doesn't recognize the file extention?( 8bf files )although the computer lists this as a recognized file.( 8bf )
View 2 Replies View RelatedI just got my hands on KPT 7 or 5 i dont remember, but does any one know of a good place to learn how to use the plugs in? tutorials or anything would be great.
View 8 Replies View Relatedplugin link needed for 3d volume in cs5.1 or what ever it takes to get this going. I have a new video card,so that isn't the problem. It was not included in the cs5.1 version.
View 1 Replies View RelatedHave looked pretty much everywhere (except the right place, apparently) for my Nik and OnOne software. Do they have to be installed into PS to work? They show up in LR and work fine.
View 4 Replies View RelatedH ow do I transfer plugins from CS5 to CS6?
View 3 Replies View RelatedWith Photoshop CS6 I found the plugins under filters; do I have to reload in Photoshop CC?
View 1 Replies View RelatedI just purchased CS6 and noticed that some of the 3rd party filters I had in CS4 have not been migrated over to CS4. The specific plugins I'm concerned about are Noiseware Professional and Alienskins, both of which I am able to access in CS4's filter drop down menu.
View 9 Replies View RelatedI have just upgraded to CS6 from CS5. How do I move my plugins to CS6?
View 4 Replies View RelatedHow do I install third party plug-ins such as NIK or Topaz in CC?
View 4 Replies View RelatedNone of my existing PS CS5 plugins (onOne, NIK, Perfect, Topaz) show up in my newly installed PS CS6. What is the recommended procedure for getting the plugins to be available under PS CS6?
View 4 Replies View RelatedWhere should I / how should I install the Lighting Styles folder and the 8bf, 8bi and 8ba files included in the optional plugins for Photoshop CS6? (Win 32)
View 2 Replies View RelatedI've recently converted from CS5 to CS6. I noticed that CS6 was pointing to CS5 for plugins rather than CS6. I made the mistake of trying to move the plugin folder from CS5 to CS6, which made a bit of a mess. I ended up reinstalling CS6, getting the most current updates, and uninstalling and reinstalling my Nik plugins, and this time they went into the correct folder (CS6 instead of CS5) -- no problem, everything worked, except for Dfine which said it was only compatible with CS5.
I got the most recent version, which is to work for CS6; I uninstalled the old Dfine; installed the new one. Everything looks fine. Except that when I attempt to use it in CS6, it crashes completely and shuts everything down. I've uninstalled and reinstalled, and gotten new downloads, etc. But this continues to happen. Everything else seems to work fine. The plug-ins are all together where they are supposed to be.
They all show up on the filter menu. I've exhausted all possibilities on the Nik side, and now I'm wondering if there's something on the Adobe Photoshop side.
My Collection of Nik plug-ins are installed to PS6. I don't know how to get them into PS CC.I also want to know how to set up the link so I can jump from PS to LR and back while editing an image.I am working on Mac desktop.
View 1 Replies View RelatedI'd like to be able to construct some Actions which use third-party Plug-ins - Is it even generally possible ....? The simpler the construction scheme the better. I'm working with CS5.
View 26 Replies View RelatedShould I just do a plain upgrade to cs6 from 5.1 and let the plugins update, too? Or should I do a clean install?
I have a lot of plugins - NIK, OnOne perfect suite, and portrait pro. This is on a mac
Several of the filters I use regularly don't have 64 bit versions.
View 13 Replies View Relatedi wish to try to run PScs6 without my Nik and Topaz plug ins to see if it improves speed.is there a way to do this short of simply deleting the plug ins?
View 3 Replies View Related'm trying to install a color wheel plug-in into Photoshop CS6, however I can't seem to get it to appear in the extensions menu.My biggest problem is that I can't find the folder where the plugin should be placed.I didn't install Photoshop onto my C: drive you see, and when I go into "C:Program Files/Adobe" all that's there is "Common Files".
Now, I tried going onto the drive where it's installed, but when I go I see both an "Adobe" and "Photoshop CS6 (64bit)" folder. There's no extra "Photoshop CS6 (64bit) folder in the Adobe folder, all that's in there is "Patch files" and there's not Plug-ins folder whatsoever in the Photoshop CS6 folder. I tried creating one, but that obviously didn't work. Not even setting that folder as the additional plug-ins folder worked... I'm not sure what else to try or where else to look.