Photoshop :: Aligning 3D Items With Vanishing Point's Perspective Planes?

Aug 18, 2012

I'm really wanting to utilize CS5's powerful 3D capabilites, but am at a loss on how to properly align 3d items in perspective to the filter Vanishing Point's planes.
 
I'm building a digitial room setting, and want to place a simply painting (extrusion created with Repousse, texture layer merged down onto 3D layer) on the wall in proper perspective, with an extruded canvas like so:

This took plenty of time to accomplish. Nudging, moving, stretching, etc.. You can see my gridlines of course there created by the Vanishing Point filter. Is there an easier or quicker way to match up 3d objects within PS to these perspective planes other than doing it visually this way?

View 6 Replies


ADVERTISEMENT

Photoshop :: Why Vanishing Point Filter In Latest CC Creating PNGs That Do Not Match Planes

Sep 3, 2013

Every time I try to use VPE, the resulting mesh is fine (the dxf), but the PNGs do not match the drawn planes at all. 
 
For example, I'll use a file from wikimedia. (all images re-compressed for the forum ) I draw the right wall, make sure it is blue, then pull the floor.Pull the floor and the left wallPull the back ground (hard to see in the compressed image, but it is there).Pull the ceiling.

The completed planes.  Right wall was drawn, remaining were each pulled out the of the previous plane.  All blue.  Entire image is covered.Importing the VPE into After Effects CC.  Note the wonky textures.Here are the actual textures (original PNGs compressed into JPEG for posting).

This is the background piece, note how the section of the image doesn't align at all with the plane I drew.I've successfully used the Vanishing Point filter extensively in previous versions of Photoshop.  I'm currently using Photoshop CC on OSX 10.8.4 running on a 15" PowerBook Retina.
 
I've tried the following to no avail:differing JPEGsdrawing the floor firstdrawing the first surface counter-clockwise and clockwise : ) ensured all planes are bluedisabled graphics acceleration under prefererencescompleted uninstalled Photoshop and reinstalled with clean performance/preference settings (did not import any previous settings).removed the "Adobe Photoshop CC Settings" folder as well.Tried exporting a DXF, again mesh looks great, textures are wrong. 

System Info below:
 
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading

[code]....

View 4 Replies View Related

Illustrator :: Perspective Grid Vanishing Point Adjustment Is Missing?

Mar 14, 2014

I was using the perspective grid tool and all of a sudden the selector for my vanishing point dissappeared.
 
How do I get this back? I have the perspective selection tool selected too BTW.      
 
This is what I have:
 
I'm missing this selector:

View 4 Replies View Related

Photoshop :: Vanishing Point Or Vanishing Patience

Jul 6, 2006

This is driving my crazy, I have been using vanishing point to copy a slab of granite onto a counter top to see what it would look like with my kitchen decor.

Everything was going along just fine and I got an island countertop covered using the right plane for it but when i tried to repeat the process for another section of counter I can't get it to work.

I make the grids just where I want them and include the island counter in the grid so I will have a source to copy from.? When I click on the Marquee tool for selecting a section of the source and then click and drag it to where I want it there is nothing in the selection.

I can see the rectangle of the Marquee moving as I drag but when I get to the target area and release it there is nothing there.

View 9 Replies View Related

Photoshop :: Vanishing Point - Shape Modification - Point Selection

Jul 6, 2013

As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
 
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.

View 10 Replies View Related

Illustrator :: Change Vanishing Plane 1Point Perspective

Dec 3, 2012

I am in some trouble in the one-point perspective in Illustrator. I am making a scene where I need the vanishing point to be on the left and the vanishing plane on the right, in one-point perspective. I just moved the vanishing point & plane where I want it to be, but Illustrator still thinks the plane is on the left, so when ever I type something and move it onto the vanishing plane, it becomes mirrored. How do I go about this? Can I change the settings for the planes or do I have to reflect the text each and every time?

View 1 Replies View Related

Maya Modeling :: Perspective Camera Shows In All Viewing Planes

Sep 5, 2012

I must have hit something on the keyboard by inadvertence, and now the perspective camera is shown in all views.

View 2 Replies View Related

Photoshop :: Vanishing Point - How To Set Up For...

Nov 28, 2008

I'm trying to set up a scene in PS CS3 using the Vanishing Point filter. When I'm done I export using save as 3ds and then import in to Autodesk 3ds Max 2009 and After Effects CS3 (saving as vpe). I don't know what I'm doing wrong, but I always get the camera flipped in strange angels. Is there some sort of tutorial showing how the workflow how to set up a scene that works in a 3dsMax or After Effects?

View 2 Replies View Related

Photoshop :: Vanishing Point?

Aug 15, 2006

I'm trying to work on this image and I want to get rid of the grey part but continue on the blue and black parts. The attatched shows what I mean, and the link sends you to the full size image. Would you prefer vanishing point?

View 1 Replies View Related

Photoshop :: Vanishing Point?

Oct 5, 2006

I'm trying to place an image on a wall within another image, if that makes sense? I'd like to place a picture on the wall in the ally.

View 2 Replies View Related

Photoshop :: Vanishing Point

May 24, 2006

I was making a flyer for my night in June, and I first wanted to wrap some words around a wall...Vanishing point did that for me!

Then I wanted to put my words on a newpaper for the back of the flyer...so I took a pic of a newspaper at the angle I wanted and then used VP AGAIN to do EXACTLY what I wanted!

Vanishing point rocks!

Dont mind the clipping on the corners...There is a bleed area when you make the flyers...so there is nothing that needs to go there

View 9 Replies View Related

Photoshop :: Vanishing Point

May 27, 2009

I've got a problem using Vanishing Point filter in Photoshop CS4. When I load this filter an error message pops saying "The operation could not be completed"  I attach a screen cap of the error.

View 6 Replies View Related

Photoshop :: Measuring In Vanishing Point

Jul 9, 2012

I`m currently using PS CS5 Extended to measure some objects in Vanishing Point (because I need the measurements to respect a certain perspective plane) and I`ve come across something that doesn`t seem right. I`ll try to describe it as best i can. I`m drawing my perspective plane based on a white reference square 60x60 cm. Then I calibrate the grid (with the measure tool) and when I extend the perspective towards the vanishing point (towards the small sides of the square) evething is fine, my calibration value does not change (as it should). But when I extend the perspective away from the vanishing point (towards the large sides of the square) my calibration value changes, it`s value increases. This is a HUGE problem for me as this influences all my subsequent measurements. It makes me question how correct the measurements really are. When I extend the grid the calibration value should NOT change. explain why this happens????

View 8 Replies View Related

Photoshop :: Can't Paste Into Vanishing Point

Jun 26, 2012

So I have this new job where I have to drop rugs and carpets into masked out room scenes. I went to my broadloom carpet file - selected the carpet - went to the room scene file - added a layer - went to vanishing point - created my grid - CTRL V .........and nothin! All of my options are greyed out.

What gives!! I have spent the whole day closing opening files, restarting PS, trying this on different files scouring the web for an answer to my dilemma.

View 4 Replies View Related

Photoshop :: Why Is Vanishing Point Unavailable?

Apr 22, 2009

I'm working in CS3. I have created a multi-layered image. Now, I want to go back to one layer and begin editing in vanishing point. But, when I'm in that layer, vanishing point is greyed out in the filters drop down. What's my problem and how do I get on the right track?

View 4 Replies View Related

Photoshop :: Vanishing Point Filter Is Being Used In File?

Mar 21, 2012

just received a file and it took me a while to work out that part of the artwork was created using vanishing point. Is there a quick way to know if vanishing point has been used in the file? Unlike other filters, there doesn't appear to be any symbols indicating this.
 
Photoshop CS5, version 12.1
Mac 10.6.8

View 3 Replies View Related

Photoshop :: CS6 Vanishing Point Font Size

Apr 9, 2013

How do I make it bigger?  When you render it to Photoshop you have to zoom in to see it.

View 4 Replies View Related

Photoshop :: 3D Type Not Snap To Vanishing Point?

Feb 21, 2013

how to snap 3D text to a defined vanishing point. Seems pretty straight forward but it does not seem to be snapping to the plane I defined?
 
Video:[URL]...

View 2 Replies View Related

Photoshop :: CS3 / Selecting Vanishing Point Filter?

Apr 20, 2011

I'm using a CS3 with a powermac and having trouble accessing Vanishing Point. No matter what I try, it remains grayed out and unavailable in the menu of filters. I've tried selecting the layer I want to work with, made a new layer, even tried selecting from different tools. I can open other filters but not this one. This is a complex, large file with many layers...

View 4 Replies View Related

Photoshop :: Vanishing Point For Camera Matching

Mar 3, 2012

I've been trying to use the VP tool in CS5 to do some camera matching work for 3dsMax. The potential is huge - it is really intuitive and fast to set up in Photoshop, but the exports never seem to work right. The cameras do not line up properly when loaded into Max, or the planes are all over the place (upside down etc) and it only seems to export one grid, no matter how many I've made in VP.
 
It's a great tool for quick fixes inside Photoshop, but exports seem largely useless right now - so wondering if this is something that is getting a tune-up for CS6, or how to get something more functional out of CS5?

View 2 Replies View Related

Photoshop :: Vanishing Point > Opt Key Doesn't Work...

Nov 14, 2007

Once I draw a perpendicular plane, I select the Option key hold it down and select the edge of my parent grid, but nothing happens aren't I meant to be able to change the angle?

View 1 Replies View Related

Photoshop :: Vanishing Point Filter Option Not Available

Jan 5, 2008

why the vanishing point option is grayed out? I am new on CS2 V9. and really appreciating what a great toolkit this is.
I have a circular image facing in the vertical plane which I want to lay down horizontal and have as in perspective (like taking a ringed archery target and laying it on the floor).

I am assuming that I need the create plane tool and believe that I get to this through the vanishing point filter.

View 3 Replies View Related

Photoshop :: CS3 Vanishing Point Decrease Resolution?

Jan 24, 2008

I use CS3 Vanishing Point tool to create 3D planes, and return 3D Layer to Photoshop

but the result seems to be disgusting, the texture's resolution of the 3D layers were decreased

the left is captured in Vanishing Point, you can see the planes I have created
the right is the final result of the tool, details of the windows had been obviously weakened

View 4 Replies View Related

Photoshop Elements :: How To Get Vanishing Point Plugin

Feb 16, 2014

its possible to get vanishing point plug in for elements

View 1 Replies View Related

Photoshop :: Vanishing Point With Text And Smart Objects

Jun 18, 2013

I have a project that requires swapping out Text & images on a faked perspective.
 
I want to use vanishing point but I want the text to remain editable wo I can easily swap it out. 
 
I also have some images I want to use as smart objects so I can swap them out easily as well.
 
I'm not sure if this is possible.  The Cut and paste doesnt seem to work.

View 2 Replies View Related

Photoshop :: How To Create Flat Grid Using Vanishing Point

Sep 15, 2012

I am trying to follow this tutorial on how to create anamorphic images and I don't know how to use vanishing point. How to create a flat grid like it says. Also, does the number of rows in a grid matter? Because in the picture it's like five rows across and when I create a grid it's at least twenty rows across. I have an art final due in a two days.

View 2 Replies View Related

Photoshop :: Print Image With Grid [Vanishing Point]

Apr 14, 2006

How can I print an image with the grid on top of it?

View 8 Replies View Related

Photoshop :: Vanishing Point Filter Results In Jaggy...

Jun 28, 2009

I have a photo of a white bus, and I need to put a banner onto the side of the bus. The banner has a solid black rectangular background. After using the Vanishing Point filter to make the banner look like it has the same perspective as the bus, the edges of the banner are jaggy. If I use the Free Transform tool to manually distort the banner into the right perspective, the edges of the banner are smooth. Is there a way to smooth out or antialias the edges when using Vanishing Point?

View 4 Replies View Related

Photoshop :: Vanishing Point Filter - Export For After Effects (VPE) Disabled

Nov 6, 2012

I am using Photoshop CS6 Extended (ver 13.0). I can apply the Vanishing Point filter to a jpeg still and set/apply the planes but the Export For After Effects (.vpe) command in the drop-down menu within the VP window is greyed out. I understood this filter is a feature of the Extended version. why this is disabled?

OS X Snow Leopard 10.6.8
MacBook Pro6,2 15" Intel Core i7

View 13 Replies View Related

Photoshop :: Get Vanishing Point To Work Up Until Place Text Into Grid

Jul 2, 2013

I'm able to get Vanishing Point to work up until I place the text into the grid I've created. It then becomes too big for the grid so it looks as if the grid has cropped it.
 
it's supposed to say OCCUPY on the ground but instead it's getting cropped and you're only seeing part of it. The original type I placed into the grid was not that large. How can I make sure the text stays within the grid at it's original size?

View 1 Replies View Related

Photoshop :: How To Change clone Tool Brush In Vanishing Point Filter

Nov 12, 2013

how to change  clone tool brush in vanishing point filter.normally it comes as oval shape vertical, have just seen horizontal shape and very tall vertical shape have tried all presets to no avail?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved