Once I draw a perpendicular plane, I select the Option key hold it down and select the edge of my parent grid, but nothing happens aren't I meant to be able to change the angle?
View 1 RepliesI'm able to get Vanishing Point to work up until I place the text into the grid I've created. It then becomes too big for the grid so it looks as if the grid has cropped it.
Â
it's supposed to say OCCUPY on the ground but instead it's getting cropped and you're only seeing part of it. The original type I placed into the grid was not that large. How can I make sure the text stays within the grid at it's original size?
This is driving my crazy, I have been using vanishing point to copy a slab of granite onto a counter top to see what it would look like with my kitchen decor.
Everything was going along just fine and I got an island countertop covered using the right plane for it but when i tried to repeat the process for another section of counter I can't get it to work.
I make the grids just where I want them and include the island counter in the grid so I will have a source to copy from.? When I click on the Marquee tool for selecting a section of the source and then click and drag it to where I want it there is nothing in the selection.
I can see the rectangle of the Marquee moving as I drag but when I get to the target area and release it there is nothing there.
I can not make anything in 3D. I think in CS3 it doesnt work too. But in graphic programs like MAYA and 3DS MAX i can make 3D objects and others but in Photoshop not. In Photoshop CS 4 I opened new document, with brush i wrote "Hello" and clicked on menu "3D" but there is everything disable :-/. My graphic card is "Ati Mobility Radeon XPRESS 200 series.
View 6 Replies View Relatedmy keyboard short cut for ctrl+ a doesn't work, for some reason. All the other keyboard shortcuts work, except for that one (At least i think so..). I read through numerous threads about why keyboard short cuts do not work. 1. they are cracked copies of photoshop, 2. they are using logitech keyboards.
But I'm not using a cracked copy, and I just upgraded my logitech drivers to the newest ones.. and the problem just started yesterday without any reason. But when I change my short cut from ctrl a to.. something else, say alt+ctrl+a. it works.. but I prefer the old ctrl A.
As a beginner i'm learning day by day how to use photoshop. Among the functions i 'd like to handle with there's the vanishing point (in the filter menu). However i can't modify the angles of my selection to change the perspective grid.
Â
Take a look on this video at 03"57 (it is what i want to do): [URL] ...... Do i have to set something up before.
Right click open with PS7 doesnt work. Every time i select it, it opens in windows picture viewer. But i can open it in illusttrator 4 some reason.
View 2 Replies View Relatedi`m trying to create a repeated circle pattern using an action that i`ve created : (starting with a black circle on a white canvas)press recordduplicate layerpress ctrl Tmove pivot pointrotate circlepress enterstop recording when i press play, the action creates a new layer but no new circle is created.
View 5 Replies View RelatedI have a lot of jpgs and want to make an animated gif of them, but that doesnt work I ve read a tutorial somewhere and there it worked. But I just get an errormessage and the only files with that I can make an animated gif are gifs
View 2 Replies View RelatedI'm trying to set up a scene in PS CS3 using the Vanishing Point filter. When I'm done I export using save as 3ds and then import in to Autodesk 3ds Max 2009 and After Effects CS3 (saving as vpe). I don't know what I'm doing wrong, but I always get the camera flipped in strange angels. Is there some sort of tutorial showing how the workflow how to set up a scene that works in a 3dsMax or After Effects?
View 2 Replies View RelatedI'm trying to work on this image and I want to get rid of the grey part but continue on the blue and black parts. The attatched shows what I mean, and the link sends you to the full size image. Would you prefer vanishing point?
View 1 Replies View RelatedI'm trying to place an image on a wall within another image, if that makes sense? I'd like to place a picture on the wall in the ally.
View 2 Replies View RelatedI was making a flyer for my night in June, and I first wanted to wrap some words around a wall...Vanishing point did that for me!
Then I wanted to put my words on a newpaper for the back of the flyer...so I took a pic of a newspaper at the angle I wanted and then used VP AGAIN to do EXACTLY what I wanted!
Vanishing point rocks!
Dont mind the clipping on the corners...There is a bleed area when you make the flyers...so there is nothing that needs to go there
I've got a problem using Vanishing Point filter in Photoshop CS4. When I load this filter an error message pops saying "The operation could not be completed" I attach a screen cap of the error.
View 6 Replies View RelatedI`m currently using PS CS5 Extended to measure some objects in Vanishing Point (because I need the measurements to respect a certain perspective plane) and I`ve come across something that doesn`t seem right. I`ll try to describe it as best i can. I`m drawing my perspective plane based on a white reference square 60x60 cm. Then I calibrate the grid (with the measure tool) and when I extend the perspective towards the vanishing point (towards the small sides of the square) evething is fine, my calibration value does not change (as it should). But when I extend the perspective away from the vanishing point (towards the large sides of the square) my calibration value changes, it`s value increases. This is a HUGE problem for me as this influences all my subsequent measurements. It makes me question how correct the measurements really are. When I extend the grid the calibration value should NOT change. explain why this happens????
View 8 Replies View RelatedSo I have this new job where I have to drop rugs and carpets into masked out room scenes. I went to my broadloom carpet file - selected the carpet - went to the room scene file - added a layer - went to vanishing point - created my grid - CTRL V .........and nothin! All of my options are greyed out.
What gives!! I have spent the whole day closing opening files, restarting PS, trying this on different files scouring the web for an answer to my dilemma.
I'm working in CS3. I have created a multi-layered image. Now, I want to go back to one layer and begin editing in vanishing point. But, when I'm in that layer, vanishing point is greyed out in the filters drop down. What's my problem and how do I get on the right track?
View 4 Replies View Related just received a file and it took me a while to work out that part of the artwork was created using vanishing point. Is there a quick way to know if vanishing point has been used in the file? Unlike other filters, there doesn't appear to be any symbols indicating this.
Â
Photoshop CS5, version 12.1
Mac 10.6.8
How do I make it bigger? When you render it to Photoshop you have to zoom in to see it.
View 4 Replies View Relatedhow to snap 3D text to a defined vanishing point. Seems pretty straight forward but it does not seem to be snapping to the plane I defined?
Â
Video:[URL]...
I'm using a CS3 with a powermac and having trouble accessing Vanishing Point. No matter what I try, it remains grayed out and unavailable in the menu of filters. I've tried selecting the layer I want to work with, made a new layer, even tried selecting from different tools. I can open other filters but not this one. This is a complex, large file with many layers...
View 4 Replies View RelatedI've been trying to use the VP tool in CS5 to do some camera matching work for 3dsMax. The potential is huge - it is really intuitive and fast to set up in Photoshop, but the exports never seem to work right. The cameras do not line up properly when loaded into Max, or the planes are all over the place (upside down etc) and it only seems to export one grid, no matter how many I've made in VP.
Â
It's a great tool for quick fixes inside Photoshop, but exports seem largely useless right now - so wondering if this is something that is getting a tune-up for CS6, or how to get something more functional out of CS5?
why the vanishing point option is grayed out? I am new on CS2 V9. and really appreciating what a great toolkit this is.
I have a circular image facing in the vertical plane which I want to lay down horizontal and have as in perspective (like taking a ringed archery target and laying it on the floor).
I am assuming that I need the create plane tool and believe that I get to this through the vanishing point filter.
I use CS3 Vanishing Point tool to create 3D planes, and return 3D Layer to Photoshop
but the result seems to be disgusting, the texture's resolution of the 3D layers were decreased
the left is captured in Vanishing Point, you can see the planes I have created
the right is the final result of the tool, details of the windows had been obviously weakened
its possible to get vanishing point plug in for elements
View 1 Replies View RelatedI have a project that requires swapping out Text & images on a faked perspective.
Â
I want to use vanishing point but I want the text to remain editable wo I can easily swap it out.Â
Â
I also have some images I want to use as smart objects so I can swap them out easily as well.
Â
I'm not sure if this is possible. The Cut and paste doesnt seem to work.
I am trying to follow this tutorial on how to create anamorphic images and I don't know how to use vanishing point. How to create a flat grid like it says. Also, does the number of rows in a grid matter? Because in the picture it's like five rows across and when I create a grid it's at least twenty rows across. I have an art final due in a two days.
View 2 Replies View RelatedHow can I print an image with the grid on top of it?
View 8 Replies View RelatedI have a photo of a white bus, and I need to put a banner onto the side of the bus. The banner has a solid black rectangular background. After using the Vanishing Point filter to make the banner look like it has the same perspective as the bus, the edges of the banner are jaggy. If I use the Free Transform tool to manually distort the banner into the right perspective, the edges of the banner are smooth. Is there a way to smooth out or antialias the edges when using Vanishing Point?
View 4 Replies View RelatedI am using Photoshop CS6 Extended (ver 13.0). I can apply the Vanishing Point filter to a jpeg still and set/apply the planes but the Export For After Effects (.vpe) command in the drop-down menu within the VP window is greyed out. I understood this filter is a feature of the Extended version. why this is disabled?
OS X Snow Leopard 10.6.8
MacBook Pro6,2 15" Intel Core i7
I'm really wanting to utilize CS5's powerful 3D capabilites, but am at a loss on how to properly align 3d items in perspective to the filter Vanishing Point's planes.
Â
I'm building a digitial room setting, and want to place a simply painting (extrusion created with Repousse, texture layer merged down onto 3D layer) on the wall in proper perspective, with an extruded canvas like so:
This took plenty of time to accomplish. Nudging, moving, stretching, etc.. You can see my gridlines of course there created by the Vanishing Point filter. Is there an easier or quicker way to match up 3d objects within PS to these perspective planes other than doing it visually this way?