I can add a vignette to a layer but how do I make a layer just for the vignette? I want to treat the vignette layer just like an adjustment layer and be able to return to it for modification.
View 1 RepliesI'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedI am experimenting with radial gradients and also elliptical selections with feather applied later via de Refine Edge command.
View 5 Replies View RelatedI am trying to make a vignette with the ellipse tool. I only get the selected ellipse black,and cannot figure out how to change it.
View 11 Replies View RelatedI want to send a pdf of a project containing a vignette to a commercial printer. Here's the challenge:creating a vignette (I can do this with layers with a gradient from black to transparent)
saving the picture as a pdf
here's the tricky part defining the black as CYMK 40 30 30 100 (not just a straight RGB to CYMK 0 0 0 100 mapping) to give a dark black when printed by a commercial printerPhotoshop express won't export pdfs Paintshop won't either Photoshop will, Will paint.net??
I attach a rough example to show what I mean.
Attached Thumbnails
Photos adjusted using Process Version 2003 incorrectly display a “Post Crop Vignette: Paint Overlay” History step. Selecting a subsequent History State can reset existing settings that follow that state in the History panel. This reset cannot be undone, effectively deleting any settings that have been applied after the selected History State. This only occurs with images adjusted in PV2003.And up until today, I was indeed seeing this Post Crop Vignette: Paint Overlay history step on my Process Version 2003 photos.
Today, I downloaded and installed Jeffrey Friedl's Data Explorer Plug-In, and I used it to create a collection which contained all of my photos that are Process 2003, so I could go through them and see if any would benefit from using Process 2012.
Lo and behold, I see my process 2003 photos now do NOT have this history step, as you can see in the attached screen capture (the history does not show this step, and at the top right, under the historgram, the photo is clearly PV 2003).have I misunderstood something, or did Jeffrey inadvertently provide a work-around, or something else?
I am running the 32 bit trial of X6 and the transparent vignette bitmap effect no longer works. I have converted the bitmap to CMYK transparent and back to not transparent several times in CorelDraw X6 and it still does not work. I have event tried making the bitmap an RGB transparent background and it still does not work.
Then when I click "Edit Bitmap..." it DOES open as a bitmap with a transparent background but the vignette function in Photo-Paint X6 does not work with the transparency either. It forces a background color. There is no longer an easy way to fade the edges of a photo.
Why do you always manage to break stuff that was working Corel?
How to use X4 layer style? It seems so slow, What is your use case mostly? I can have it with vector object/text, ok, but sometimes, it is slow with raster layer.
View 3 Replies View RelatedHave used Corel photo album 6 for many years and loved it, was very easy to use. When I got my new laptop, I was told that my program was outdated and was recommended that I purchase Corel paintshop Prox4, so I did. I would like to burn my pictures to a CD or DVD for backup and to share with my family, only. My old program had an easy one step button to click on to make a CD/DVD. I find this product to be difficult to use for an average person just wanting to have a little fun with their pictures and doing some minor corrections.
View 2 Replies View RelatedI've been using PSP since 7.
Now I'm using x4 and I noticed that when I cut/copy a portion of a pic and then paste it as a new image....then I want to copy and paste that portion back into the original photo using paste as new layer....the icon doesn't change automatically from the lasso/cut tool to the move tool.
It used to do that automatically in psp 7 so that right after I paste as new layer, i can move that portion around right away.
In x4, after you paste as new layer, you can't move that layer around because it hasn't changed automatically to the move tool. I have to manually click on the move tool everytime I want to move the layer around. It's very irritating!
Any settings I can change to make it automatically change to "move tool" right after pasting a pic as new layer?
It's a problem occurring frequently If the contents of a specific layer is comprised of thin, short or small objects, brush strokes etc. and I need to move them.
When I try to select them (in order to move them), many times the mouse goes a little to the side of the objects (because they're so thin/small) and clicks on the object(s) on the layer beneath. This also has the unwanted side-effect of automatically deselecting the current layer.
Isn't it possible, once a layer is selected, to click and drag anywhere on the canvas to move its contents without deselecting it, like in Photoshop?
I've been marking-up images with vector text (on vector layer) and have some issues. After clicking to position the text box, typing in text and then clicking the CHECK tool button to 'set', how does one go about deselecting that text object? It's not working smoothly here!!
View 1 Replies View RelatedI'm a new user of Paint Shop Pro X4 and have come across from Photoshop Elements 9.
One feature I can't seem to find, if it exists at all, even though it really should, is the ability to move a layer while constraining it horizontally or vertically.
In PSE/PS you can hold down the Shift key when dragging layers to keep it on the X or Y axis allowing the layer to be positioned without it drifting in the wrong direction.
Can PSP X4 do this, and if so, how?
I've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?
I am creating a photo collage and have created a Vector Layer (Text Tool) however I am unable to see this text on top of a Raster Layer (Photo). However the Text is visible if I move it onto the Background. I am unable to Arrange the Text to the Top.
View 1 Replies View RelatedI bought PSP about a year or so ago, but grew frustrated with it and reverted back to Gimp. Now, however, I think I am ready to jump back.. and I encountered originally back then.
Basically, in some of the adjustment layers (Local Tone Mapping, Fill Light & Clarity) the mask doesn't work. When I click on the mask control the mask color in the dialog switches from white to black, but the screen doesn't revert back to underlying layer.This is very repeatable. It only happens in some AL, others like Layers and Curves work reliably.
I am on W7 x 64, PSP X4 v 14.2.01
Since version X4 I sometimes have the problem that no layer has the focus anymore. So no layer is active and then I cannot select any tool. I never had that befor and I do not like it.
Is that a bug or a new feature which makes sence in some cases? Can I switch that "new feature" off?
I have a script that merge (Flatten) all layers but if an image has a single layer and that layer is a background layer then my script fails.What comes to my mind is to get a layer count and if that count is 1 then check if that layer is a background layer, if it is then do not merge.
How can i get a layer count and how can i get the layer type of a specific layer?Are there more resources about scripting in PSP, a library reference or something?
Today, as I was fiddling around with PSPX5, I noticed that every time you create a rectangle/ellipse/pen tool lines/etc, a new layer is created.
Can I modify the current layer without having a new layer added?
This is what I mean
[URL]...
This is what I get See here:
[URL]....
This bug has always been in PSP. for as long as i can remember. but in previous versions it just sent it bananas. in this version it can cause a full crash and lock up.
If you have no layer below the one currently selected, for example you only have one raster layer (put something in this layer suitable for drop shadow,) and you select 3D effects -> drop shadow with 'shadow on new layer' selected every time you adjust one of the shadow parameters it creates a new layer. so you can end up with dozens of new layers. seems like part of the routine is to renew the process every time a parameter is adjusted but the logic that removes the layer doesn't work when the source is at the bottom.
new to X4 is that if my system is under high cpu utilization it just completely crashes. probably the method by which it allocates the new memory to new layers is timing out.
I work at a fast pace, so I need the new layer button, in the toolbar to be available to me.
When I click new layer via the toolbar UNDOCKED to add a new vector layer, the options disappear.
However, If the layer menu is docked, I can click it.
can't find a tutorial on how to make image text in PSP x2 or x3.
View 9 Replies View RelatedI'm using PSP 8. What is the easiest way to place call outs, if that's the right term?
Ideally I'd like to be able to select a rounded, shadowed rectangle with the arrow appropriately positioned (top, bottom, left, right) and of adjustable length, insert the text (typically a single letter or number), and then be able to group these so that I could drag the callout into the required position. I might need to place 10 or 20 on each of several maps, so it needs to be very simple and fast.
I've never properly used 'Picture Tubes' although I have a feeling that would be one way to achieve this. But the images built in to PSP 8 do not include any callouts. Maybe it's best done from first principles, making a set of shapes first and saving them (in empty form) as individual files, positioning them and then finally adding the letter/number separately?
Im trying to insert an image just like this one. Do you see how the color is faded into his shirt?
View 1 Replies View RelatedIs there a way to make 3D transparent Text? So that it would look as if Transparent 3D Text characters were embedded in a solid surface? Imagine a transparent 3D letter pushed into 2D surface. This would wrap the surface around the letter, kind of like a river around a rock.
View 2 Replies View RelatedI have a pspmage that I can not make any adjustment on. I can make adjustments on others in the same folder with no problem.
View 1 Replies View RelatedPSP X5 version 15.2.0.12 -- no further update available. -- Windows 7 Ultimate SP1
When I try to merge down (not flatten) the top layer in the attached file, PSP X5 stops working EVERY TIME. I have been using PSP X5 extensively for a while (6 or 8 months) and have never encountered this before. All layers are 100% opaque, so this is not the same as a similar reported error. Also happens in PSP X4. I can work around this by cutting and pasting, but shouldn't have to.
BugExample.zip
Bug example: merge down top layer crashes PSP X5
(20.96 KiB) Downloaded 41 times
since the last update for Paintshop Pro X4, I can't add a new layer form the layers palette and I cant edit the text color at all. I can change the color in the palette but it will not change in the text at all. Is it me or is it a bug?
View 5 Replies View RelatedI've converted hundreds of photos to B/W and used the eraser tool or masking to bring out the color detail from background.
I received one last night exactly the same image information that was on the other files. It was taken from my daughter's cell and previous pictures she sent never had a problem.
.jpg
72 PPI
RGB-8bit channel
Duplicated the background converted it to B/W in the Effect>Photo Effects>Black and White Film Clicked on eraser and instead of my daughter's white teeth there was an orange transparent area where I erased.I tried masking with the same effect.
How, after changing a photo to B&W, to color back in a section to the original colors, but can I change those colors to a different color? Like if I wanted to change a hat from red to green.
View 3 Replies View RelatedI'm trying to customize the Layer Palette with icons that I mostly use but it does not work. It have been possible in all previous versions. Is it just me or is it a bug or something new that we have to live with?
View 1 Replies View Related