Maya Animation :: Constrain Foot To Pedal / Put Pedal In Place?
Mar 8, 2013
I have a character on a monocycle and what we did was constraining stuff to stuff which I didn't quite understand. Understanding it is not so important for now, it should work in the first place - but doesn't.
We
- pushed the pedals out of the monocycle structure in outliner
- constraintoint the foot to the pedal
- constraintoint the pedal to the wheel axis
- constraintrient the ankle joint to the pedal
- constraintoint the ikHandle to the pedal.
correct the list above if you feel there's a mistake.
Now that we've pushed the pedal out of its place in the monocycle structure, I don't know what to do with it. When i place it where it was before it won't work properly. Perhaps I have to do further steps but this is all I got in class yesterday.
imagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar. With maya constrains not work fine and don't know why.
How i do? i need to create a Auxiliary Node in the Character Controls?
imagine you have a HumanIK character and a vehicle like motorbike or similar, and you want the character to drive the vehicle. Ok then: Parent the reference node (your_character_name:Reference) into your vehicle root. Ok, works fine but now you need to constrain or parent the control of the hands to the handlebar.With maya constrains not work fine and don’t know why.
i need to create a Auxiliary Node in the Character Controls?I’m trying with Parent Constrain, Orient, Aim.. and don’t work properly: Position (tx,ty,tz) work’s fine but X-axis of rotations are inverted… when turn the handlebar to left, rotation turn to right.i trying with offsets or any parameter in the constrain but nothing..
I have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
My current scene has 10 animation layers for a character, and seeing every f-curve from all layers, although grey and locked, when I only need to see the f-curves in layer I'm working on is really cluttering the graph editor. My current work around is selecting my active layer in the Layer Editor every time I select a rig control. Simple enough, but a pretty inefficient way of working. I can't seem to find a setting that allows me to just see ONLY the fcurves in the active layer. I imagine some of you out there may have hundreds of animations for a single game character.
I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points 2. connect the points with a curve 3. loft a circle using the curve as a path in order to make a rope 4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
I have an assignment for a class where part of the final project is detailing the construction of a mold for a part. The animation that I would like to do would show the build up of the part in a 3D printer layer by layer. The closest method of animating this that I can think of is unfortunately backwards.
As I would have the part and a camera facing up from the bottom of the part and would have a plane that would recede upwards in the y direction. This would reveal the part as the plane translates in the y direction.
This might be okay, but the problem is that I would like to show this from a camera on top facing down instead of a camera on bottom facing up. How I can create the look of a part being built up in this additive method?
I am trying to add an expression to the standard Mudbox car to make the wheels turn when the vehicle moves in both the X & Z dimension. I have found many scripts that let me do this in a single dimension. I have found some others that claim to work for both dimensions, but at certain angles the wheels turn in the wrong direction.
My work flow is as follows: 1 - Export car from Mudbox to Maya 2 - Separate the wheels & center pivot all items 3 - Add NurbsCurves to create a rig 4 - Parenting the elements of the car 5 - Add an expression based on this web post [URL]....... 6 - Test the animation
It works great when translating the car in the Z axis, but when the car is rotated 95 degrees in the Y axis the wheel will only go backwards no matter which direction the car is moved.
I have attached an MB (Maya 2013) so you can see the
translate facial motion capturing data (basically 2d point clouds) to blendshape weights. I finished rigging my character and wanted to drive my blendshapes by the relative position of my tracking data, e.g. distance between corners of the mouth drive the "wide" blendshape and so on...
Hope YOU know a solution for this, I believe blendshapes are THE way to create realism in tracked animation but I was not able to find ANY reference to something like that. I'd like it to be customizable and not to expensive, so the imagemetrics faceware service won't do for me
How come baking some part of animation in graph editor deletes everything before and after the part i bake and how can i bake that part while leaving the rest untouched?
I have a character with animation. Another character is the same(same bones, meshes), but with no animation, 100 times larger in size and I resize the head to make the head looks slimmer. They are saved in different fbx files and I imported them into mb scenes. I select the root bone and "select hierarchy", the export options is shown below. Then select in the same way in the larger character's scene, the importer options is shown below. THE PROBLEM is: after I import the atom, the character becomes shrinked to the same size as the former one and the ratio of head becomes the same as the former one too.
For some scenes we have a chain which is wrapped around several cogs, just like a bicycle. In this scenario we need the chain links to follow the path and retain their relationship to each other.
In other scenes we have a chain which follows along a changing path. Imagine this if you can: A heavy weight has a chain attached which goes vertically up, over a pulley and down the other side where it is attached to a lorry. The lorry drives off pulling the weight upwards. This is my challenge!
Should I individually constrain the links using a Pin constraint and use dynamics completely to keep the chain taught?
Was wondering if there is a way of getting random camera movements? For example, i am doing a fly through of an earthquake scene and as the camera animates along the street it randomly shakes with the earthquake shocks.
I know I could animate it by hand but I wondered if there was a way (perhaps an expression) to make it more simple?
I want to key frame animate something to go in a straight line but it seems to start out slowly, speed up, and then slow down again at the end. Is there a way to make it so the object moves the same speed throughout?
I have an animation layer that I have exported and Im trying to import it into a new file and then merge it down to the base layer.
what ends up happening is that when I do the merge i get two additional layers. and the layer with the animation stays there. and nothing gets baked. the animation stays in the imported layer.
I should be able to import/export animation layers right?
I have a image plane. I would like to move the image of the plane in animation. It looks out then masking. I need only some parts of the image in frame one, and I need other parts of the image on frame 100. The plane isn't moving, only the image is moving in the box.
I am working on a school assignment where we are to use mocap for character animation...well av gone that far but, now I need to edit the animation to fit better in my animation......below is a playblast of what I have now..i need to have my characters holding onto the broom....
I've been working on an animation for a week or two and all of the sudden the file no longer plays the animation. The keyframes are there and I can scrub through them, but when I hit play it just hangs on the frame it's already on, it says it's playing (The icon changes to stop and in the corner it says "Hit ESC to stop playing", but nothing moves. I can bring it into older versions of Maya and it plays, but the only other version of Maya I have is 2008 and it doesn't like the transfer from 2011 to 2008.
i'm actually starting to design and code the animation part of the pipeline for my studio. So if you have a given shot in a given version, you have a bunch of animations for all characters/props, and you can publish a version of your animation and rollback your animation to older versions.I have two kinds animations exported : one "normal" and a geocache version also. For the geocache, I use Alembic and for the moment I'm pretty happy with the results.
For the "normal" version, i was thinking of using animImportExport module from maya. It seems to work fine, but then comes THE issue I remember having to discuss for hours in all the studios I've worked : what about the constraints?i have my character, for example Ogre_chr (group node) and i export all anim below that node and call it Ogre_chr_Shot101_v01.anim. But if there's a constraint outside the ogre, it won't be exported. I could take the anim of the object that is constraining and add it to my .anim, but imagine two characters interact with one same constraint : saving versions of both characters will cause issues when you play around with loading different versions of both characters.
When I key the arm on frame 1 for instance, then key the hip they both appear on the same frame, meaning if I copy the arm to frame 20, it copies the hip too.Or if I want to adjust the arm on frame 10 it also adjusts the hip (and all the other frames in the scene.)Making it practically impossible to tween anything at all because it's all lumped together.
I deleted my entire walk cycle and started over again, reset the options to default, reloaded Maya... and it's still happening but only in this scene.
As I am setting the driven successfully in Maya 2011, and when i am animating the driven controller by using the attribute, the animnation is snapping to the default driven value, to max. driven value, and to min. driven value, So, i can't the see the in-betweeings between to keys.
I have a figure with an oxygen mask attached to his face and an air pipe leading from the mask to a tank on his chest. I've added bones coming from the head for the mask and pipe and I need to fix the bone at the end of the pipe to the tank so that when he moves his head the pipe flexs but the end doesn't move from the tank. Hopefully that is clear
Is there a way to constrain the end of the pipe bone to possibly the rib cage bone? So they move together? With the pipe being flexible in between.
I am working in the Hypershade in Maya 2009. I need to see my place 2d texture nodes for my file textures.
Somehow they seem to have disappeared completely. There are no nodes in the utilities tab, and expanding the network to see inputs and outputs is not showing them either.
I rigged a model and everything was working fine. I then started going into the blocking phase of some animation I was going to do with it. After a review it was requested that I put some extra bit of rigging on the model. We basically wanted to have the ability to grab both eyes with a controller and pull them around positionally and have the bit of skin they cover follow along with the eyes. So I dropped in some bpones where the eyes are, made the controller bits, linked everything up, so far so good. My problem comes when I try to skin the mesh to the new bones I just dropped in. The verts I have selected, even when given a weight of .1 seem to shoot forward in space. They dont seem to be respecting the bones current position that they are being weighted to.
I fear this may have something to do with the fact that I have animation in this scene which I know isnt ideal but were doing a series of xreffing so our master rig file also contains our master animation data. Seperate files are saved out as backups but as far as working files, yeah, its all in there. So could this be whats causing my verts to jump forward in space when I am skinning a bone that they currently are at its position? Or perhaps some errant transform? In the image I have selected the two rings beneath his eyes and given them a weight of .1. As you can see the verts are shooting out in front of the mesh when they should be staying in place at the eye bone I am trying to skin them to.
How I can check if an object is within a polygon face on the y axis?
On another note, would it be possible to get a world coordinates of the U or V vectors of a vertex? I had been trying to calculate it from two vertices that has around the same V values, but in some cases they don’t exist.
I am trying to setup a a system that allows me to rotate Point 1 and 2 joints to place downstream spheres into specific locations such that the distance and angles between the spheres don't change.
Everything works the way I want (so far), but Sphere04 goes the opposite direction of its IK chain.
I found a toy which is belong to my brother's son in my grandmother' house. It is a Fire engines, and it has a adjustable Fire ladder，then I want build this things with maya, so ......the modeling is done, and then the problem comes out when I ready to rig the fire ladder, look at the pic below, let me explain:
1.there are three axle in red : A B C , blue things is base of axle 2.the green thing is the fire ladder 3.the yellow thing is a hydraulic push-rod which can be adjustable 4.the pink thing looks like a Skateboard, and hydraulic push-rod base on it. 5.the gray thing is a part of fire engines' body.
there is no problem if it has a fixed pole instead hydraulic push-rod, because I can just use a IK handle link A & C, but now....it doesn't work.
