I am about to upgrade to LR 5. Currently I use LR4.4 which uses Camera RAW 7.4. LR5 uses Camera RAW 8.2. Will I be able to edit RAW files in LR5 and still continue to edit the resultant files in Photoshop CS5 without using a DNG conversion?
View 9 Replies
Today I decided I would try to use Lightroom to edit my latest photo shoot instead of Aperture just to test it out. If I imported all of my pictures as .CR2 files, are the photos I'm editing the RAW photos or the JPG photos? I do all of my shoots in RAW+JPG, and I don't know which files I'm editing in LR. In Aperture it's easy to tell because the RAW and JPG files show up separate but this isn't the case in LR. If I go into "Metadata" for the photos it lists the file name as "IMG_xxxx.CR2," but it also lists "JPG" under "Sidecar Files." I don't know if that means I'm editing the JPG or if that's just telling me that the JPG exists in the CR2 file.
View 1 Replies View RelatedI am new to lightroom. I just purchased lightroom four and recently purchased a nikon D800. How do I edit nef files in lightroom four. I presently get an error message.
View 2 Replies View RelatedI tried to edit the capture time on NEF files. I set -5 hours in "Metadata" > "Edit Capture Time", selected "Write date or time changes into proprietary raw files" and clicked "Save to Metadata" but the file does not change. There is just a new XMP file created, but i would like to edit this in raw files.
When I tried the above steps witha JPEG file everything works fine, but also when I try to change capture time on files, which exists in JPEG and NEF, neither the JPEG nor the NEF changes. Only the XMP.
It's the same problem like this, but even there is no answer:[URL].....
I run Lightroom 4.3 on Windows 7.
When I try to import raw files taken on a d610 Nikon Lightroom 3 does not recognize them. Is there something I can install or do I need to upgrade to Lightroom 5?
View 1 Replies View RelatedI just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
I'm on a PC running Windows 7 64bit.
LR4 has a longstanding bug where it can no longer edit RAW files in Photoshop CS6.
Most (including me) appear to be using a work-around where a copy is made of the Photoshop CS6 executable and slightly renaming it. this is then plugged into LR4 as a third-party editor. A far from convenient or professional affair!
Why does the Adobe Labs ADOBE RAW beta not update RAW in LR4 but only CS6?
I'm using LR 4.3 and CS5, with ACR 6.7 installed. Whenever I'm using "Edit in PS CS5" comand inside LR, automatically I'm getting a duplicate TIFF file added to my LR catalog. How can I avoid this?
View 16 Replies View RelatedHow to set up lr5 to edit photos in ps cc rather than or in addition to ps cs6?
View 1 Replies View RelatedI tried to edit some raw files as layers in PS CC from LR5 (Photo>Edit in>Open as layers in Photoshop). I want to do this for blending layers. One file works but 2 or more files doesn't. PS opens and nothing happens. If have the latest versions of LR5 and PS CC.
View 3 Replies View RelatedHow can I move pictures without losing history (exposure changes, crop changes, etc)? I have LR4 and am using DNG files. No matter how I move files (move the folder within LR, move the folder than then re-sync in LR, etc) it always loses the History. I've searched and have found numerous "tutorials" on how to properly move files but can't seem to be able to keep the History along with it (I get the last state of the image, but not the actual history itself).
View 2 Replies View RelatedI have a system of labeling my images to differentiate between the source files and the final edit images, but sometimes I need to apply different labels if there is something that's not ordinary to my process. My problem is that when I go back through my archive to look for something, I forget why I lebeled something a different color. I've been creating JPG's in Photoshop with notes for that specific job, but that's getting to be a pain.
It would be great to be able to create a note within Lightroom that I can view while I'm thumbing through my images.
I understand how Smart Previews work. What I'm unsure of is...will we be able to edit these files remotely, separate from the host computer? For example, I'm an image editor and I live 500 miles away from the photographer that I work for. Can they (the photographer) download the images after shooting, create Smart Previews then send me the 'Smart Preview' folder of images, I edited them on my own computer then return the Smart Previews back to them fully edited?
View 3 Replies View RelatedI have been editing and saving pictures on lightroom 3 to an external hard drive while working off an old laptop. I just recently bought a new computer and installed lightroom 3. How do I view and edit the same files on the external hard drive from the new computer?
View 8 Replies View RelatedI'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies View RelatedI am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
I am trying to edit some VOB files from my daughter's wedding CD. But Photoshop won't accept that format. I read that I could just change the extension to AVI and drag them in. I did that and it opened them but the video and audio didn't sync. The size was distorted but I figured out that I could change the aspect ratio to widescreen from the view menu which looks pretty normal. But I see black lines on the sides of the video. What do I have to do to be able to edit the video??
View 10 Replies View Relatedi have corel x4 and when ever i open my corel files, i cannot edit, copy paste or do any changes on those files.
View 2 Replies View RelatedI just bought a joomla template and I got 2 spd files, but i have never worked with psd files or Paint.net.
If it is possible for a complete newbie to modify a psd file in Paint.net? I have some experience with other freeware to modify images but they do not support psd files.
I have attached a screenshot of the psd files. I need to change the color of the menus, and the text and color of the image in the home page and logo website.
Attached Thumbnails
Is it possible to edit .TS files with Premiere?
View 1 Replies View RelatedI'm using X3. I encountered a problem today with captured DV files: I can't open them with VideoStudio. Some weeks ago it was possible to open those files. When I try to import them, VS says: "Unable to open file". I can open them with BSPlayer and Mediaplayer Classic (and sony vegas). With VLC Player there is a message that the file is "broken" but I can still see the video (but audio goes crappy). I've installed shark007's codec pack. I have also tried to reinstall videostudio, but it didn't work. I have a massive project file with many DV AVI files, and I can't see the files.
View 5 Replies View RelatedI would like to know about editing of .avi video files with Corel Video studio Pro. What i am trying to do is three things 1, remove existing text in the video while keeping the effects. 2, Add my own text to where the original text is now. 3, ad my own clips to the video. The .avi file that I am attempting to edit is actually a video template and is designed to be edited. I can't seem to remove the text in the video. There are two files : ".aep" and ".prpro" Would these file have any thing to do with the editing of the video files?
View 5 Replies View RelatedI was wondering if there were any plugins that would allow me to open and edit the .eps and .ai files for paint.net?
View 13 Replies View RelatedWe are looking to buy a wide format scanner to scan technical drawings into our system. We would like to be able to take that scanned image and export it into our cad software and then edit them (stretchlines, move lines, etc.).
I see where you can purchase software that will convert PDF's into a .dwg file. At that point can we do "complete" editing, just as if it had been created in our software?
Can Paint.NET open EPS Files and Edit them?
I am attempting to learn to do my own vector images so that I can comfortably someday at least do all my own graphics for advertising and logos, banners, that sort of thing. I might need a special plug-in but even that was complicated. What is the real deal with this?
I hate to think that Adobe Photoshop is the be all end all program, for this type applications.
Can I edit .GIF files in Photoshop Elements 12?I can drag the gif file into the program, but it does not show up animated.I've test edited some gifs, but the only file that changes is the first layer of the GIF.
View 3 Replies View RelatedI created and saved several files today, both as .ai and as .pdf. Then I quit illustrator. Now when I re-open the files, they are opening as .ai* (with the astrisk) and I can not edit them. How do I edit them?
View 1 Replies View RelatedHow can i edit my nef files from a nikon d7000 in ps4.
View 7 Replies View RelatedTrying to edit video but Photoshop cs6 wont open the VOB files. I tried to change the extension to AVI and then drag it in. It works but it's distorted.
View 8 Replies View RelatedI can open cad files, i can add informaiton but I cannot delete or edit/open blocks.
I can not make any changes to block, i cant even move them.
If i type in the command BLOCKEDITOR my response is 0-READ ONLY
