I imported my images from my 5d mark iii via LR4. The first 203 images imported perfectly the last 125 did not. The message read "the following files were not imported because the could not be read"? I don't understand, they were all on the same card? They show in lightroom when you are selecting which ones to import, they just will not import. I tried it two times My LR4 is updated as well.
View 8 Replies
Why can't I preview or import images from my canon 5d mark III in lightroom 3?
View 3 Replies View RelatedI got the chance to try out the 5d mark iii today, so I installed Lightroom 4 on my computer. After realizing the files wouldn't load correctly, I researched the issue a bit and found out about the 4.1 RC2 download. I downloaded it and ran through the installer on my computer (iMac, OSX Lion 10.7.2) and everything seemed fine, yet when I open Lightroom it still reads as version 4.0, and won't import the RAW files from the mark iii. I tried restarting, re-downloading, etc
View 4 Replies View RelatedWhen trying to import photos from my Canon 5D Mark III into Lightroom 4.2, the import usually freezes up at some arbitrary point. It will either crash lightroom altogether, or it will have a message saying "could not import all files, files could not be read." (something along those lines.)
I am using a 1 year old iMac with a 1 TB HD. I import directly onto that hard drive. Lightroom has never had an issue importing. My previous camera was a Canon EOS T1i. The problems started when I purchased my 5D Mark III. Images from my T1i, in fact, still import fine with no issues. I am running OS X version 10.7.5. My compact flash card is brand new, a Lexar 1000x. I have seen some suggesting it may be a hard drive issue, however, the evidence points to the 5D Mark III not playing well with LR 4.2. (T1i images still import fine.)
I am unable to import .CR2 files from Canon 5D Mark 11 and 1D Mark IV on Mac OS 10.9 ??
View 5 Replies View RelatedI'm trying to import RAW files shot from a friend's Canon 5D Mark III, but have been unsuccessful. It gives me the message "the file is from a camera which is not recognized by the raw format support in lightroom"
I normally import RAW files from my Canon 7D, but for some reason it's not recognizing these files.
How can I fix this?
i need your opinion regarding a phenomena i am observing in the RAW images from Mark iii.The following images appear to be absolutely correct in the camera and when viewed through a picture viewer.I have tried and tested the following scenarios:
1. Used a medium speed kingston CF Card (new) and transferred the images through the USB cable supplied with the camera.2. Thought the card might be slow OR faulty.. used Sandisk Extreme and Extreme Pro SD Cards but same result.3. Transferred SD Card data through the builit in laptop card reader.4. Have directly imported the images from SD Card into Lightroom 4.3, copied the data firstly to laptop HDD and then imported, copied the SD card data to an external HDD and then copied.same result!!5. Have tried the same with both Win7 and Mac OS.6. The DPP sw that came with the camera gives the error of 'Decoding Failed' with these images.
Usually 10-15 images out of 100 give this kinda pattern.
lightroom 3.6 cannot read the canon 5d mark III images. What can I do?
View 1 Replies View RelatedI am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
I have a brand new Macbook Pro with Retina Display and am running CS6, shooting with a Mark III in full resolution raw format. Focus is on in camera but when I open the images in Photoshop, they do not appear super sharp when zoomed in.
Is this a display issue or a program issue or something else? In the past I can usually get the images so sharp that I can see every pore and hair.
This issue occured shortly after update to 4.2, but not directly after. I am using windows 8.
The issue that occurs is after importing images they are adjusted automatically to develop module cross process 1. After dealing with this annoyance for a bit of time I realized that I can not even "RESET ALL" the images to delete the adjustment. In delving into other images that have been in my database for quite some time, I have tried to "RESET ALL", which resets images to CROSS PROCESS 1. I have never set import to automatically adjust.
I just upgraded from LR3.6 to 4.0. When trying to import images the import module freezes for a few minutes and then displays the import screen. However, when selecting a source the program freezes again and eventually crashes.
I had the same issue when upgrading to 3.6 some time ago and then found that disabling some USB controllers solved the problem. This works for LR4 as well. As I don't need all USB connections this is a workable solution, however, disabling controllers should not be necessary to run a program.
System is an Acer Aspire 7811 64 bits w/ Intel i7, Win 7 Home Premium, 8 GB internal mem and no external drives.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I'm trying to import photos into LR3.3, and the thumbnails are grayed out, as is the import button. The photos come from two other cameras -- one Canon Elf, the other I'm not sure. I received them through dropbox, and they open fine with Bridge and Photoshop CS4.
View 4 Replies View RelatedLightroom will not display preview images during import of raw images. Any images in other formats display fine but with raw images I get a gray window the size of the preview image and the words "preview unavailable for this file".
Running Windows XP 64, Lightroom 3.3.
Whilst PS reads all my files from external hard drives (previously worked with Windows)onto my Imac, LR sees the files but they are "dimed" and thus will not import. There is no error message.
View 1 Replies View RelatedI have just purchased a Canon 5D Mark III. I have Lightroom 3 and Lightroom 4. I have tried to import RAW images, but neither of the Lightrooms will import the images. Do I need a plug in or update?
View 3 Replies View RelatedI have all of my photographs backed up on a Westeren Digital hard drive. It is called "My Book K" How can I get that into LR so I can imoport, or export from LR? Also is it hard on my external hard drive to leave it on all the time?
View 2 Replies View RelatedI can't import images into lightroom..
View 9 Replies View RelatedI really am utterly confused by LR.3.6
What I am doing is for every new set of images, say a wedding, I am setting up a new catalogue on the off board HD.
I then import the images as DNG's & that's after first off loading them as the original Nikon RAW files (I don't trust either LR or myself to get it right) onto another HD.
So, now I have 2x copies.
One original non-PP RAW files
One open in LR as DNG's which I then work upon.
Now, a few days later, I plug in the HD into my PC and Lo! File name is off line or missing.
This happens more often than not, so maybe 75% of my work flow is stymatised by having to work out what's happened or I have to start again on the PP.
At this point, I am trying to both open the .lrcat file either from within LR / File / Open Recent or directly from the file on the offboard HD.
I can see the DNG's but LR seems unable to do so.
What error am I making?
I recently upgraded from Lightroom 4.x to 5.3, and I am now unable to import any new images. The import dialog allows me to select files, but once I press the import button (and this includes using "Add", "Copy", and "Copy as DNG"), nothing happens. I've left it 'transferring' overnight — nothing. I eventually cancel and a box pops up that says "No photos or videos were found to import.
I've tried uninstalling and reinstalling LR5 and working with a fresh catalog. No luck. I even deleted all the preference files and everything. Nothing. I'm about to be in a real bind if I can't import new work soon.
When I insert a CF card into my reader, thumbnails of my images appear in the organizer. When I click on "Import", the following message appears: "The following files were not imported because they could not be read." I didn't have this problem with versions 2 or 3 of Lightroom.
View 8 Replies View RelatedRecently purchased LR5. When I import from my CompactFlash card via an external card reader, images do not import. Only blank grey thumbnails; no matter how long I wait. If I double click on a blank thumbnail, the image does show up. When I return to the thumbnail view, a bunch of surrounding images will appear as thumbnails, but not all. In order to get all of the images on the card to show as thumbnails, I have to double click on numerous thumbnails until all thumbnail images are loaded. If I'm importing photos to different folders, I have to go through this process over and over again.
View 2 Replies View Relatedhow do i get rid of the ever prevalent selection ants that mark all the layers. This feature is very distracting and uncalled for.
View 2 Replies View RelatedI am using LR4.1
Just tried to import some images from an SD card (using a card reader) as I normally do and the import freezes on "importing files". Before import the thumbnails shows and I have tried a different SD card. Is this a bug? do I need to re-install LR?
I posted this questions previously and the answer was to update to 5.3, do a clean format and try again. I did all of those things and RAW files will STILL not import into LR. I've left it for up to 45 minutes with nothing but a spinning wheel and the "importing files" on the screen.
View 2 Replies View RelatedWhen I attempt to import images from my Nikon 4s, I receive a message it cannot.
View 1 Replies View RelatedHow do I import images from iPhoto into Lightroom?
details:
Lightroom 2-7
iMac purchased 2010
OS Snow Leopard
iPhoto
I'm a longtime LR user and just upgraded to LR4, but have one camera (Panasonic Lumix LX3) which LR import the raw images as bw. I can't figure out why?I've checked the import settings (import as DNG) (apply preset > None) etc. When I look in the History panel after import it just says the imported date, no indication of conversion to bw.
Obviously I can just convert them back to color in the develop panel but I don't understand why this is happening, and with only this camera's files (my Canons all import as normal)?
images show up/start as 4x6, then when import, crop to 4x5.
View 1 Replies View RelatedIn lightroom 4 when I import images it does not show all the images in the folder. I have deleted the folder from lightroom and attempted to reload it. When I did it had the same problem it did not show about half or the images in the folder. I went back to the folder and check all the images and could not find anything wrong with the images.
View 9 Replies View Related
