when trying to make several objects to have the same size. In freehand I used mark several pictures and I could just put Hight and Width in the respective fields...all pics had the same size. In Illustratur, if you mark several pics, the size field will only show the collective size of all pics. I know about "object frames" which are not of use for me.
View 2 Replies
I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
What Happened:
For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters. I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm. My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X) of the webdesign. I did this before and it worked perfectly.
But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y) turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger than it was before. How can this be, and how can I still make the images(X&Y) the same size?
What I already tried:
- I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches. Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and when I pasted the other picture(Y) in this image, the same problem was still there.
- I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters. Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
How do I decrease the size of my pics, they're all around 7MB or 5MB, I need to get them to 2MB
View 1 Replies View RelatedIs thee anyway I can Change the size of all my pictures at once?
View 1 Replies View RelatedI have lots of images within folders within my pictures, my ask is this how do i make all the pictures within the folder the same size, is there a one click solution or is it a case of doing each image as i use it for manipulation? Most of the images are2387x1929 pixels.
View 6 Replies View RelatedHow do you size picture's to be sent in a email? On the old version I could figure it out be now on this version I can find where to do this. Also how do you make a colleagues in Photoshop Elements 11.
View 2 Replies View Relatedhow do you print wallet size pictures.
View 4 Replies View RelatedI am dealing with 128 x 128 or smaller. The more I shrink a picture the more I loose details. Photo > Sharpen works a little bit in some cases but in most I am loosing to much detail no matter. How do I fix this? If possible my pics need to remain in .png format
View 8 Replies View RelatedI notice that when I use Lightroom 5 to rename the pictures contained in a folder, the folder size is reduced afterward. For example, a folder containing 349 jpg files was 1.52 GB but after renaming them, the folder size was redusce to 1.30 GB.
View 8 Replies View RelatedI'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). How I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
View 3 Replies View RelatedHow to print a sheet of pictures 2x3.5 (business card size). I have reduced the size of the picture but I can't figure out how to fill a sheet with this image and print it.
View 3 Replies View RelatedUsing CS4 PS extend.
I am editing old pictures. To save time I am scanning four pictures at a time. I'm using the marquee tool to crop each picture into their own layer via right click method and choosing "Layer via copy." After I'm done doing this for all four pictures, I have to hide all but one layer, trim the project to the picture size, save it. Then I undo the trim, and start over for the next picture to save.
Is there any easier way to save each cropped section as their own picture/project at the size of their crop without effecting the other pictures? Was wondering if there was a way to crop the portions I want out but instead of copy to layer method, I could just create a new project with that cropped picture?
lately I've been started working on Illustrator, since I've always loved the vector pen tool in Photoshop, but I've notice something...
let's say I want to work on an A4 page. I start a new PRINT document, and set the A4 size at 300 DPI. If I do that on Photoshop, I'll get a huge white page that at 100% goes way out my screen, but if I start a document with the same size in Illustrator, I get a page that's smaller than my screen (at 100%).
I guess it's normal because those programs might work in different ways, but I'm concerned about it because this way, in Illustrator a 1pt size brush will always be bigger than in Photoshop.
My Plugin does not use global suite references. Instead it acquires and releases suites as required. The problem is with the panel. I want to get the size of the panel when the size is changed (so I can change size of embedded wxpanel accordingly). To get the size, I need to acquire panel suite. However, the SetSizeChangedNotifyProc callback method only provides panelref and no message or anything else. How can I get the suite in this scenario?
Also this piece of code to embed wxpanel inside aipanel, handle resize etc is going into a dll so that it can be used by multiple plugins. So I do not want to use global suite ptr.
I've been using Illustrator CC from the cloud on Mac OS 10.6.8 fine for months and today after Placing some jpegs into my document it's stopped letting me place anything! I can't even re-link the images that are already there. I've also tried to make a new document.
View 2 Replies View RelatedI'm trying to join two images. Both of them are .svg files, but whenever I press Ctrl-J it gives me a error: The selected objects cannot be joined as they are invalid objects(Compound paths, closed paths, text objects, graphs, Live Paint group) You can use the Join command to connect two or more paths, paths in groups;or to close an open paths.
(By the way, I'm using Illustrator cs6 on a trial version)
how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6
View 1 Replies View RelatedI'm a hobbyist model builder, and I'm starting my first, homemade model. It's going to be a miniature of Wimbeldon's famed centre court. While, the object is not to make an exact miniature version of the real thing, I would like to make it as accurate as possible.
That said, I need to create a sketch (see examples @ [URL) based on real pictures of the stadium. Is there a way to do this using Illustrator? I've tried the various trace options, but nothing even comes close to accomplishing this. I hampered by my inability to draw freehand and my lack of experience with CAD programs.
Most of the time I got issue with placed pictures that I have to take a lot of time to do it one by one, so I am looking for any action to peform in bulk as follow:
1. Select all pictures and change their 'Placment Options'
2. Replace all pictures with only one same picture
3. Cancel the repacement at once (if you select 100 pictures to relink, then you decide to cancel you'll have to press Esc 100 times too!)
I tried to create action for Placement Options too, but seems that the action cannot be recorded with such activity.Are all these improved in CS6?
I'm quite new to illustrator and I am trying to make a company catalogue.
On screen the pictures look ok and they are high res. When I print A3 the pictures print perfectly but when I print in an A4 booklet they are really blurrey.
I've been creating charts in Excel 2004 for Mac for years and copying them into Illustrator. They have always previously pasted into Illustrator as vectors illustrations. I've created hundreds of charts in Excel before and copied them to Illustrator to "dress them up" for reports with no problems. I just created a chart in Excel 2004 for Mac and copied it to Illustrator and it came in as a picture. This is the first time I have ever had this happen with an Excel chart.
View 3 Replies View RelatedI am trying to download pictures in folders and sub folders into the LR catalog. The import brings all the pics in the subfolders over but when II click on the parent folder it shows not pictures or number of pictures in it.
View 4 Replies View RelatedI am making a collage for a friend. I have all the pictures I want that I edited from photoshop and brought into illustator. I made an outline of a buffalo (he is from buffalo) using the pen tool. I filled it in with pictures but i need to know how to trim away the remainders of the pictures that go past the buffalo outline. Basically i need to delete everything that is outside the vector buffalo, but i am having a terrible time figuring this out. Im not sure if i need the trim away tool, draw inside or something else.
View 4 Replies View RelatedI recently have been taking night shots and having hard time to edit them: Black spots / red spots / street lighting ect -
[URL]
I imported pictures to Adobe Lightroom and exported them to my memory card. Now my memory card is broke! Is there any way to retrieve those pictures from Lightroom. Right now they are saying missing.
View 6 Replies View RelatedI'm an experienced CorelDRAW user (so I do have some vector graphic experience) but a noob to Illustrator and trying to evalutate switching.In CorelDRAW when I export an EPS it doesn't matter what size paper the CorelDRAW file uses, the EPS bounding box is only the size of the drawing.
In Illustrator, however, it seems that I have to set the art board to the size of the drawing. Otherwise when the EPS is pulled into another program (like InDesign) the frame created is much bigger than the actual drawing leaving white space around the drawing.
Is there an EPS setting I'm missing somewhere that would make AI set the bounding box to the drawing and not the artboard?
Or (as most of the Illustrator files we'll be working with are created by someone else) is there a way to automatcially set the size of the paste board to the size of the drawing?
I have made this artwork in illustrator (included an image of it below). it is for newspaper print. When i export it to Illustator PDF the size is MASSIVE 40mb! I sent this to them via a link hoping to get away with it but they replied & said please send as 3mb as the file it to big! What am i going to do now? I have flatterened transparency & rasterized everything in Illy but it only makes it larger.
the size of the overall artwork is
W:262mm
H:190mm
I am using trial of Adobe Illustrator CS5. When ever I export file (RGB) to PNG or JPG format, there is size difference of 1px in width or hight or both. But when I save that file with Save for Web & Devices option, then there is no such issue.
I have tested with so many files.I didn't faced such problem with Illustrator 4.
My font size top tab wont scroll up or down, it some times works in the side tool bar but not all the time.
View 2 Replies View RelatedI just upgraded to Illustrator CS6 on a PC. I try to save my graphic in Save for Web and want to alter the image size, but it won't change, it just goes back to the original size. If I change the percentage box, the values change. I have tried linking and unlinking the proportions and nothing. What am I missing?? I don't have time to guess the percentage to get to the exact width I need.
View 3 Replies View RelatedI know this seems to becoming at something backwards, but if I can do this it will make life easier for doing custom stripes for cars.
I open a profile image of the particular car. I create my vector stripes on the image.
Now...if I could draw a line of a known measurement on the graphic in illustrator (eg. between two doors) and then select that line (and the stripe graphic) and set the line to be a certain size (eg. 35 inches) and it would scale the rest of the stripe that would be useful.
