I have some trouble with copy/paste charts from Excel 2010 into Illustrator CS5. I can move things around, but I can not change the colours in Illustrator. The chart is shown as a picture graphic, not a vector in Illustrator. Also when I save the Excel chart in a PDF and try to open it in Illustrator CS5 it is still a picture, not a vector graphic. Where is the bug? (I am using Windows 7.)
View 8 RepliesI have an MS Word 2011 document with an Excel pie chart embedded.Double-clicking the pie chart will open it in Excel 2011.Copying/pasting the chart into Illustrator CS6 results in an uneditable bit image.
Previously, with Word 2008 and Illustrator CS2, this worked perfectly. Mind you, I had tons of excess empty paths and such to scrape out, but still, after a couple of minutes' scraping, I had an editable .ai file ready to be cleaned up, captions typeset, and colors edited for export to .eps and placement in InDesign
In fact, right now I've had to jump over to my old iBook G4 to open my old copies of Word 2008 and Illustrator CS2 in order to do this so I can get this job out the door.Is there any way at all that I can get an Excel 2011 pie chart into Illustrator CS6 as a vector image?
I've tried the shift-click on "Copy Picture" method, but the pie chart still appears as a bit image, and the text is turned to gibberish. Saving the chart as a pdf returns the same results.
At this point in the project, asking for the raw data set and regenerating the pies in Illustrator isn't an option -- and besides, I've had to do that before. Oh, the pain.
I' m importing Excel 2008 excel pie charts to illustrator CS5. I am cutting and pasting content between the applications to import. When importing a pie chart - the chart imports OK, but the pie elements import as low resiolution non-vector elements. Is there a way to import as 100% vector elements? Note - all other chart types - bar graphs etc import fine!.
View 5 Replies View RelatedCopying an excel chart (2010 and/or 2013, Windows 7 Ultimate) to Illustrator CS6 works okay if line chart lines are solid... but if they are dotted, then in Excel 2010, the dotted line becomes jumbled, and in Excel 2013, the dotted line converts to a solid line... is the only solution to this to save the excel chart as a pdf, or is there another workaround?
Essentially, I am creating a chart in excel and adding a few notations and graphic elements in illustrator for professional publishing..
When I copied and pasted charts from excel, the lines are all doubled. This is the first time I got this. I could not figure out what is the difference between these double lines and the regular lines. Any clues how to change the lines to regular ones. I am using AI CC.
There is no difference in Excel.
I was wondering if there was a way to import excel datat into illustrator, then it populates a vector pie or bar chart for me?
[URL]
The calibri font used for graphs in Excel are not recognized when the graphs are copied into Adobe Illustrator. Other than changing the font to arial or another font. I upgraded from CS4 to CS6 on my mac and I still get the same error, "An unknown shading type was encountered," and the letters in the chart get substituted with jumbled symbols. I've tried copy the chart directly from excel to illustrator as well as saving it as a pdf or postcript file and then opening in illustrator. But neither approach works.
A friend managed to open the chart in Illustrator (CS5 on a mac) which gave the prompt that it cannot read the font and that it will display it as outlines. This worked and the text was displayed properly. But for some reason I never received this promopt whether using illustrator from CS4 or CS6.
I cut and pasted a pie chart from MS Excel into PS, but when it prints, the imagery looks very low res, with jagged lines and text. Is there anything I can do differently, or is this a limitation due to Excel?
View 9 Replies View RelatedIf I was to make a chart in excel or word can I insert this into autoCAD and have it so I can adjust this in CAD?
View 3 Replies View RelatedI have an embeded excel chart on my drawing called CLASS 125 Single Disc.xls. I want to switch this chart with another one known as CLASS 150 Single Disc.xls. How do I do this? I am using Autodesk Inventor 2011.
View 9 Replies View RelatedHow do you ungroup or expand a pie chart in Adobe Illustrator CS6? This functionality seems to have been removed. Say I'd like to remove the legend: before, I could ungroup the chart, release its link to the data, and then delete the legend with my white mouse. Object > Expand no longer works either.
View 6 Replies View RelatedI use minus front all the time... well, I'm trying to make a pie chart with just the outside (see example). The logical way to do this to me is the make the pie chart, put an ellipse over everything and "minus front" it using the pathfinder tool. Well, I did this, and even though "minus front" is an available option--I can even click it--nothing happens when I click it. Even when I isolate each wedge of the pie chart, I cannot get any part of it to clip using "minus front."
View 9 Replies View RelatedWhat is procedure to create a legislative seating chart with illustrator.
Examples of such charts are as follows: [URL] ....
we have a website concept in Illustrator CS3, with named swatches for all colors. I'm wondering if there is an easy or 'semi-automated' way to generate a chart of the swatches we are using, showing there hex values?
I know I could draw out a bunch of boxes, fill them with the swatch colors, and manually look up and type in the hex values for each. But this would take a LONG time, as there are a number of color variations.
I want to create a creative graphic chart in Illustrator and place it into Word. the catch is that the client -- who doesn't use Illustrator -- wants to update it later. Is that a possibility? If not directly in Illustrator is there another app which would would play nicely with Word?
View 6 Replies View RelatedIs there a way to make a trend line with the chart tools in AI? Specifically, a polynomial trendline. I am so disappointed with the apparent limitations of the chart tools available.
View 1 Replies View RelatedI'll omit the long background --- suffice it to say I did this once and need to do it again, but can't recall the toolchain / workflow I used.
I _think_ it was Macromedia FreeHand 8, and that I used a plug-in w/in that program, but I can't recall. Any way other than rendering the drawing as a half-toned bitmap and then tracing it? Or re-drawing the image on top of such a bitmap?
Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
We recently built our new company website which we're happy enough with. However one element we tried to capture was an interactive donught shaped pie chart, using javascript to click on each seperate section.
The end result can be viewed at URL....
You'll notice imemdiately that the part that's a little off is the text which sits in each section. IS there an easier way to combine the graphic, text and javascript to achieve the effect we're looking for?
I know we all feel the difficulty in how ancient the graph / table tool in Illustrator is.
But, is there a way to display Data Labels on the front of my stacked bar chart?
See attached image - this is what I want to achieve.
I am working on a scatter chart in Illustrator. We would like to use circles instead of the default square. I have figured out how to create and use a custom graphic for this. However, no matter what size circle I create, it seems to default back to the size of what the square was.
Is there any way to customize the size of the graphic objects used in the scatter chart?
We have a Visual Basic Script that creates pie charts using Adobe Illustrator along with an internally created app called Chart Generator. An xml file that contains a markup for a set of pie charts is imported into Chart generator and by using Illustrator it generates all of the pie charts and saves them as individual eps files.
It was recently discovered that not all of the pie slices are proportioning correctly. In some cases a slice that is 10% of the pie appears larger than a slice that is 13% of the pie. We can’t determine a pattern that might be causing this issue. We think that the problem is in the Visual Basic coding.
I've been using Illustrator since the late 80's but this request just now came up for the first time, twice in one day: the clients each want me to send them layered files (OK-no problem) wherein all the layers, even the raster layers, register as vector layers. Or at least all the layers, regardless of file-type (vector or raster) are contained within an unflattened Illustrator file. One of the clients specifically asked that the Type layer (No problem-all the type is on one layer) be "vector mapped", whatever that means, while all the other layers can be Photoshop layers, if necessary. So how do I hand them an open, unflattened Illustrator file containing both vector art and raster art? Can it be done in Acrobat, as a PDF? I'm working in AI and PS CS5, but I can and will upgrade if I have to.
View 4 Replies View RelatedIllustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
Can export the repair details from dwg drawing prepared by asd in to excel by the use of auto cad?
View 3 Replies View RelatedI have a table imported into autocad from excel, however despite the table (excel) being formatted, border lines appropriately placed and hidden througout the sheet, all off the border lines of the cells appear when imported into autocad.
is there anything i can do to hide back some border lines for selected cells?
I created an assembly, so far with one part in it. I created an Excel spreadsheet with several dimensions in it that would be used in the assembly parts. I went to Manage>Parameters and linked the spreadsheet. The Excel file appeared in the Parameter Dialog Box with the parameters included in it. However, when I create a part in the assembly and attempt to dimension a sketch in it, the parameters option in the dimension box is not present.
I have done this in the past in IV2009, has anything changed that I cannot do so in 2010?
I am trying to add an excel document to a cad drawing using ole. I wish to make it transparent so that only the cells themselves are visible and not the white background and empty cells. (I hope that makes sense).
View 3 Replies View RelatedWe have this problem at the moment with an Microsoft excel file that appears to have become stuck in the External references list, Ref C1-01-06. We would like to remove it if possible as it is now superseded (we can't change the file name unfortunately. What do we do if we can't reload, detach or bind? Its not referenced into anything else that is attached to the file, it is a direct attachment of the file that we are in.
View 3 Replies View RelatedWhat is the best way to Insert an Excel sheet into autocad?
View 4 Replies View RelatedI use an embedded excel file I a lot of my drawings. 90% of the time a double click opens excel for editing with no problem. But every so often I get a stubborn one that just will not open. It will select and the quick properties box will appear and then the properties box, but nor firing up of Excel. Usually if I am persistent I can get it to work, but I have one right now that is more stubborn than I am.
View 2 Replies View Related