Using Photoshop or Elements, it is possible to open up two image of the same subject (I.e. a building) taken taken at several minutes interval, then using the move tool you combine the two images, then add a layer mask, you can edit out any people or distractions, how is this possible in Gimp, I have both Photoshop and Elements (Both Legit), but I dont want to return to Windows.
View 2 RepliesI usually try to see for myself but when I apply a layer mask, I don't think that there's any difference, so what do they change and what are they supposed to be used for?
View 3 Replies View RelatedWhy do people use layer masks?
I read tutorials all the time. They say to apply the mask, then erase the mask around where you want to keep, then delete the picture thats under the mask.
Why not just use an eraser and erase what you don't want?
[URL]
You know how you can add a 'layer mask' to a layer and then apply various shades of grey to the mask to alter the transparency of the layer.
For some work I find this awkward as you cant see what your doing on the layer mask (or have a missed a trick here). Are there any alternatives? I would be nice if there was a blend mode to make one layer alter the transparency of the layer below.
I have a single layer which is a bunch of people with their hands in the air (on top of transparency).
I want to change every bit of the shape of those people.... to a single color (e.g., very, very light gray blue)
I am having trouble with using my layer masks. I can use the masks that are hidden (shown with black screen) and apply them with the white brush, but I cant get white or shown masks to be taken off with the black brush. Sometimes, not always I have trouble adjusting the opacity of white masks. I was playing around with actions I downloaded and after applying three actions to a photo, elements froze on me. I read about trashing preferences, I dont know what that does or means but I tried to hit cntrol alt shift when photoshop was opening and nothing happened. When it first opens it shows I can install the new inspiration browser ( i dont know what that is either) thinking it was a required update I tried to update and it gave me an error message, something about the installer has been mis-configured.
View 4 Replies View Related1. Is there a "show quick mask" feature for showing masks?
I know Gimp has a "*Show quick mask*" feature which shows what you have(and haven't) selected by displaying a red overlay over your image,allowing you to add to or subtract from a selection by using the paintbrush, but I haven't found a similar feature for showing masks.
Photoshop has this feature (it's called 'reveal mask' I think) and it basically just shows a red overlay of your mask on your image so that,similar to the quick mask feature in Gimp, you can see where you have and haven't masked through.
(I don't own Photoshop so I'm not sure if the red overlay shows the opacity with which you've masked through or whether or not you can edit the mask when it's being shown as a red overlay.)
2. Is there a command for showing the layer underneath the current layer I'm working on?
This is another feature that I've seen Photoshop has that is useful for blending multiple exposures (and lots of things, really).
Basically it's just a keyboard shortcut for showing the layer underneath your current when you hold down a certain keyboard command (it's not something you toggle since it's meant for quickly viewing what's on the layer underneath your current one).
I know I can press space bar to show or hide the layer I'm currently working on, but I can't do that unless I focus into the layers dialogue first. It'd be nice if I could activate that functionality from anywhere,regardless of whether I'm focused on the layers dialogue.
Do either of these features exist in Gimp?
I have 2 pictures:
main picture - group of people (no room at either end to insert anyone)
2nd picture - 2 people standing together
Best place is to put them at the back of the group. But how do I do this? I am new to gimp and think I have to play with layers, but don't know how to.
Is there any way of removing the lines that go around the edge of a blank layer? I'm making a design which has a black background where I need to experiment by moving other layers around, and I keep getting the faint outside edge of the layer showing. For example, I created a transparent layer to create a supa nova; I move the layer around the black background and get the faint outside edge of the layer.
Is there anyway of getting rid of these besides maybe using the clone tool?
How to edit out a whole person in a photo?
I am trying to edit out the person on the left in picture...
I have photoshop elements 11. People analyzer will not recognize people or allow me to tag people in my photos. It works with my older camera photos such as from my Nikon D300 but will not work with photos from my D800 (RAW).
View 10 Replies View RelatedI'm using a clipping mask on a layer. The base layer that the clipping mask is referencing has a layer effect applied (in this case an inner shadow). I want to make it so the layer effect is only applied to the base layer and NOT the clipped layers.
Below is an example of what I'm talking about. as you can see, layer 1 has the base layer's inner shadow applied to it. I want the inner shadow to be hidden by Layer 1, but the clipping mask to still apply.
A student of mine asked why you would create multiple layer masks on a single layer.
View 6 Replies View RelatedMy goal is to batch plots using VB in Visual Studio 2008, Autocad Map 3D 2010, Win 7 Pro 64. It all works but now I want to apply layerstates.
I am using the example in the dev. guide here: [URL]........
My questions:
1. If you use Option Strict, how do you convert from integer to "layerstatesmasks.color"? VS shows the error "Option Strict On disallows implicit conversions from 'Integer' to 'Autodesk.AutoCAD.DatabaseServices.LayerStateMasks'." I can't figure out the conversion. Are the values documented somewhere? "clientmask" is not in the object browser or the dev. guide.
2. If you aren't sure what is masked, do you turn on all of the options on (on, color, linetype, lineweight, etc.)? Is there a sum of values that means "layerstatemasks.all"?
3. LAS files are DXF format. Do I have to read the LAS to detemine what the user wants?
4. The second argument to .restorelayerstate is the viewport id. The examples use objectid.null. I could have several layouts to plot, and maybe several viewports. Is the process a) Make the layout current, b) activate each viewport, c) set model space current, and d) restore the layerstate?
I added another mask, when I start brushing it just switches back to the other?
View 7 Replies View RelatedIf I have already made a layer mask for a specific layer...how do I copy the same layer mask and apply it to whatever layer I want?
Also, how do I make it start out all black instead of all white when creating layer masks?
I have added a layer mask and now they want me to fill it black... problem is when I do will it black it removes the blur and revert back to the normal image?
View 2 Replies View Relatedwhat a layer mask is and give me an example of where it owuld be used and how?
View 4 Replies View RelatedI am having a problem in Photoshop CS6 where I am getting posterization in a layer mask, instead of a smooth gradient / transition. I am 87% sure that this is resulting in a visible hard transition in the final image (a TIFF, not a jpeg).
I have tried applying a gaussian blur to the mask, but this just changes the posterization, it doesn't remove it. Doing the gaussian blur with the document in 16 bit mode doesn't make any difference.
The posterization is visible at all zoom levels. I have tried setting cache levels to 1 and GPU acceleration to basic (and restarting PS), but still see the posterization when using a soft brush on a layer mask.
I read some of the other threads on the forum where people had problems with their graphics cards / monitor profiles causing things to look posterized when they weren't really. The examples given in those threads looked okay to me, so I think it is a Photoshop related problem rather than a general problem for me. I've attached two screenshots below, hopefully you can open them up full size and see if they appear posterized to you.
I'm not sure what the problem is or how to fix it?
I swear I remember that there is a preference somewhere for turning off the automatic addition of Layer Masks for new Adjustment Layers, but I can't remember where I saw it. I'd like to disable the automatic creation of layer masks during addition of adjustment layers.
View 2 Replies View RelatedI have several times a little problem with subject.
If you take some Layer Style and then set mask on it then its of course mask all image.
I have problem to exlain it, i'll show:
that i have, and want to achieve that:
but get that by swich on mask on that layer:
So did i miss something about layer styles and there is easy way to apply mask to only effects, but not to image itself? Or at least to get something like that:
P.S. I know that it can be done my manipulation with groups or "merging" but is there some more "natural" way?
playing around with layer masks today and we can erase and paint on the masks, but i really want to type on it, or even put a photo image on it.
why a new layer is opened when i type spmething?
I would like to know if someone can please show me how to use multiple layer masks in an image? For example..I would like to do a curves adjustment layer and also only add contrast to a certain part of the image.
View 1 Replies View RelatedMasks have stopped working in CS3 , I can't paint on them .
View 5 Replies View RelatedI've downloaded and briefly messed around with Paint.Net, and while you can work with layers, I haven't found a way to use layer masks. I used to exclusively use GIMP, but then I found out about Adobe Lightroom, so I bought that and have been extremely happy with it. However, I can't do any pixel editing to get rid of any phone lines, or people's heads, or any other item that is goofing up my photo. I didn't want to go back to GIMP (it's not the easiest program to use), but then I found out about Paint.Net and that it uses layers.
I assumed that it would also have the option to use layer masks, as a natural extension or feature of having layers. But again I can't figure out, or have found online, a way to create layer masks.
I am totally new with photo editing and barely know anything about GIMP, so I need a ton of detailed explanation.
Here is the image:
Image 41
I want to make the girl in the middle closer to the two guys, right now it looks a bit awkward. How can I do this while keeping the integrity of the background.
How to fix broken / destroyed layer masks (or the reason for that phenomenon)?
After clicking Alt+Click the whole picture transformed into rectangular fields and all masks are broken. I save the file 5min before that accident and it still works - only this file is dead
1st picture: accident
2nd picture: how it was before
last 3 pictures: layer masks right now... yes they are changing
Photoshop CS6 (student version) Version 13.1.2 x64 MacBook Pro: Mountain Lion 10.8.42.7 GHz Intel Core i716 GB 1600 MHz DDR3 NVIDIA GeForce GT 650M 1024 MB
if it's possible to add a GRADIENT vector mask to a vector shape layer?
I have a logo made up of various vector layers, and I need one of them to fade to transparency. I traditionally use a regular "black-to-transparent" gradient on the mask for this, but it's pixel-based. So my question is, with regards to the black-to-transparent gradient located in the mask of a vector layer... is there any way to make this gradient vector-based instead of pixel-based?
So I can resize the logo at will without affecting the quality of the gradient in the single layer mask.All the vector mask tutorials I found are for shapes (regular and irregular) but don't seem to involve gradient-based transparency <- which is what I need.
Is there a way to make non destructive adjustments to a layer mask?
View 6 Replies View RelatedI regularly work on large Photoshop files with many layers and folders within folders and always have the problem moving a folder only to find that somewhere inside there was a layer with an unlinked mask and it gets left behind. Is there a way i can 'relink all layer masks' without having to manually go through and relink them all? Similar to the 'Close all folders' option i guess...
View 1 Replies View RelatedI am having trouble aligning two layers that have layer masks on them. At the moment, the Align Left Edge tool is aligning the layers based off the entire contents of the layer, and not the mask, resulting in the layers not appearing aligned at all. Is there something I can do to tell the Align tool to take the masks into account?
I am using CS6.