GIMP :: How To Straighten Converging Verticals
Jan 2, 2012Is there any way of straightening converging verticals in Gimp.
View 1 Replies
ADVERTISEMENT
Photoshop :: CS6 New Tool For Correcting Converging Verticals
Jan 3, 2013I came across a new tool in PS CS6, which has been introduced in this new version that can be used to correct converging verticals. I used it a couple of times in the past and now forgot its name and how to access it.
Basically it allows me to place lines on my picture that are supposed to be parallel and the tool them straightens out the picture intelligently without distorting it too much. It is ideal to correct edges of buildings that seem to converge.
I am familiar with Free Transform and basic Lens Correction filter, so I am pretty sure it was not one of these.
Photoshop Elements :: Skew To Correct Converging Verticals?
Oct 19, 2012In Photoshop when I skewed to correct converging verticals, then I needed to free transform to get the verticals to the right height again. Then I changed the canvas size to include all the photo. I can't figure out how to do this in Elements.
View 6 Replies View RelatedPhotoshop :: Why Does Straighten Tool Straighten But Not Automatically Crop
Apr 2, 2012if I use the Straighten tool (first the ruler to mark out a horizon line, then click the Straighten Layer button), Photoshop used to straighten the picture, and then automatically crop it so that none of the extra canvas shows.
When I do that now, it just straightens it, and leaves me to manually crop the picture.
GIMP :: Straighten Scanned Picture?
Aug 11, 2013I have some scanned pages from an old book, and the lines etc curve downwards near one edge. Is there a way to easily straighten them out?
View 1 Replies View RelatedAutoCAD Inventor :: Animate Converging Geometry
Nov 5, 2013I would like to be able to show an animation of a flat plate of material converging into a half hollow sphere (like a bowl). Its easy to model the beginning and end stae, but I do not know how to show it transitioning from one to the other.
How to do this? I need it for a presentation to convey a design concept.
Maya Animation :: Converging Two Joint Chains
Sep 12, 2013What I have is a Rig that has two Handles that control a joint chain each and I was wondering if there was any way to Converge both changes into the Joint in the center, because what i am trying to create is a dynamic bead loop. With it as it is the bones facing down are fine, but the ones facing upward falls to the "Floor".
Is there anyway that I can accomplish this or an easier to do this?
AutoCAD Civil 3D :: Zero Cross Slope - Polyline Width Targets But No Verticals
Nov 2, 2012With the default cross slope 2% in place and no profile targets, section views with subject sub assembly come up at 0%
there's some polyline width targets but no verticals...
Photoshop :: Straighten Without Cropping?
Nov 10, 2012I haven't been able to figure out how to use the Straighten tool without cropping.
I am starting with a full page image with Pixel Dimensions of 9750 x 13050 pixels, and a Document Size of 8.125 x 10.875 inches. I want to use the Straighten tool, and then use the Patch tool to fix the resulting irregularities around the edges.
But no matter what I try, I end up with smaller Pixel Dimensions and a smaller Document Size; for example: 9725 x 13016 pixels and 8.104 x 10.847 inches. This occurs regardless of whether I have the Delete Cropped Pixels boxed checked.
I also tried starting with a Canvas Size of 8.125 x 10.875 inches, and using Place…to bring in the image. But the Straighten process still results in a similar reduction in the Pixel Dimensions and Document Size.
I am accessing the Straighten tool via the Crop tool. Is there any other method to Straighten?
The screenshots below show the original Image Size (top) and the Image Size after Straighten (bottom).
Photoshop :: Straighten Up Photo
Feb 8, 2013I have a photo slightly lopsided how do i go about straighten it uo using Adobe Photoshop CS3
View 3 Replies View RelatedPhotoshop :: How To Straighten Objects
Mar 21, 2011I am a photographer and I am trying to straighten a postcard photo of the Washington Memorial. I want to straighten the memorial without harming the rest of my photo (it is a apature priority photo and I have flowers near my camera and the memorial in the background). So I want to somehow lasso the memorial in the background and straighten it- what is the best way to do this?
View 9 Replies View RelatedPhotoshop :: CS3 Straighten And Crop?
Mar 9, 2012on my laptop i run xp adn photoshop cs3 normal (not extended)what i miss is a good straighten and crop like cs5in cs3 i use the ruler tool ->rotate canvas -> arbitrary and i my photo is straight but with big borders around the photo now cs5 does a great job but photoshop cs3 no there is the scipt straighten and crop photos but in this case doesn't do a great job
because delete the borders and my photo returns to be awryok i can crop manually , but it's exhausting if i have to work on some photos , one by oneis there a script/action/tips or plugin that can do the same great cs5 job?
Photoshop :: How Do I Straighten Images Using...
Mar 18, 2008how I straighten images like horizons and buildings using Photoshop CS2?
I run the software under Windows XP
Photoshop :: Straighten Tool
Mar 25, 2008Can someone point me to the button or menu that has the straighten tool?
View 3 Replies View RelatedLightroom :: How To Straighten A Picture
Jan 22, 2013i have just got lr4 today and am struggling with how to straighten a picture in it,at the moment im having to jump back to elements
View 2 Replies View RelatedPhotoshop :: How To Straighten Text With A Macro
Jan 28, 2013I have a very big folder of .txt files that are flattened. They contain various words, but since they have an ugly old effect on them I need to flatten them out.
The text has a wave or an arch, always in a different position. How do I do the following by way of macro:
1) identify the size of arch and it's highest point.
2) then inverse it, so it straightens it out.
I want to apply this to thousands of old headings/headlines. This is why I need to create a macro for this.
Photoshop :: Crop And Straighten Automation
Feb 14, 2006I am running Photoshop CS. I have many hundred documents to scan and was going to use the pre loaded "Crop and Straighten" tool under file/automate. My problem is I want to run this over a folder that will save and close, not just one image at a time.
I also want it to do an automatic save using the current file name without adding the word "copy" to it, and not have to type over the file name each time when the save option comes up with "Filename copy.tiff".
I know the Crop and straighten tool is great for putting several images on a scanner and it separating them into individual images, but this is not what I am doing, I have one scan, one document.
So is it possible to run this over a folder of 500+ documents and walk away from it, have all images save and close using the current name, and not fill the desktop up with many opened images that need to be manually closed?
Photoshop :: How To Flatten / Straighten An Image Of A Can
Jan 30, 2007Could anyone tell me how to flatten / straighten an image.
I have tried using the perspective crop tool but it only works on rectangular images.
Photoshop Elements :: How To Straighten A Photo
Jun 13, 2013I have followed the instructions provided but when I click on Stragten Photo, it turns the photo almost diagonally. I never get the line that appears in the How To blurb. I find that i go back to my old software to do this task as it is much easier.
View 1 Replies View RelatedPhotoshop Elements :: How To Straighten Photos
Jan 14, 2013My boyfriend purchased Photoshop Elements 11 for me recently and I am just now learning how to use it. I did some Wedding photos for a friend yesterday and I've edited them but some of them are slightly crooked. I went looking for a straightening tool but was unable to find it. I finally found in the menu where it says 'Rotate' and looked in that selection and at the bottom it says Straighten and Crop and underneath that is another that says "Straighten".
I went on Youtube and whatever I find there is so majorly different from my program that I cannot even use their tutorials. How to use Photoshop elements 11 to straighten my photos? I need to do this right away so the couple can have their photos.
Lightroom :: Zoom In While Using The Straighten Tool?
Aug 2, 2012So I can zoom in align the Straighten Tool precisely to the edge of something..
View 1 Replies View RelatedPhotoshop :: Crop And Straighten Automatic Script
Jun 13, 2012I have a couple of photos of the sun (700 to be exact) that I'm trying to crop. Doing it manually on each one would be very tedious and so I found the automatic script of Crop & Straighten.
However, even though it does a good crop when I batch process all my snaps using an action with the crop & straighten within it, the photos are also straightened or rotated in this case. Is there any way to avoid the straightening part to work on the images and just use the tool to crop the images automatically ?
CorelDRAW Graphics Suite X6 :: How To Straighten Image
Jul 9, 2012How to straighten an image in Coreldraw?
I try the crop tool, envelope tool, but couldn't find a way to do it.
Xara :: Crop And Straighten With The Fill Tool?
Dec 19, 2012You can easily fix crooked photos, zoom and crop with the fill tool.
The first step is to make sure you have the rulers enabled (window>bars>rulers) then click and drag a horizontal guideline from the ruler.
Select your photo and select the fill tool, you will see that your photo is actually a vector shape with a bitmap fill. Click and drag the outer fill handles to enlarge (zoom) the bitmap within the shape and rotate as needed to straighten the image. Move the cursor over the line of the fil handles until it changes to a hand then click and drag the photo around to adjust it's position within the shape.
Photoshop Elements :: Why Does Straighten Tool In 11 Freeze When Try To Use It
Oct 25, 2012When I click on the straighten tool and then click on a horizontal line on my photo, as I attempt to draw the line across the photo it freezes after a fraction of an inch and rotates the photo before I've drawn the line along the horizontal feature I'm using and it's always wrong. I had this problem with my downloaded trial version of Elements 11 and it appears on the version I purchased in the store today.
View 10 Replies View RelatedLightroom :: Can Get Crop And Straighten Tool To Default To 16 : 9
Jun 29, 2012I have a large number of RAW photos from a Canon 7D which are destined for use in a Premiere Pro CS6 project.
I want to crop each of them to the preset 16x9 1920 x 1080.
What I would like to happen is that when I open the photo in the develop module and press the R button to open the Crop and Straighten tool, that the Aspect 16X9 crop overlay is selected be default, rather then the "original".
This would save me a lot of mouse clicks...
Or perhaps it's possible to assign a keyboard shortcut to that particular aspect so I can press R and then something else?
Lightroom :: Zoomed View When Crop / Straighten?
Jan 19, 2013I'm new to Lightoom but learning quickly. One thing that has given me a problem is in develop module when I wish to straighten and crop, but need to do this zoomed in on the image. Can't judge the straightening otherwise. When I try this as soon as hit the straighten tool the image goes to fit to screen and I can no longer judge my straightening.
View 7 Replies View RelatedPhotoshop :: Using Crop Tool To Straighten Crooked Image
Sep 5, 2013In CS6 I have an image that was scanned in and is crooked. I use the Crop tool to drag the crop marks around the portion of the image I want to keep and I press the Check mark to do the crop.
It crops the image though it does not straighten it out. In previous versions of Photoshop it use to crop and straighten the image by cropping it. How do you now use the Crop tool to straighten an image?
Photoshop :: Getting Error When Straighten Image With Ruler Tool
Aug 22, 2012When I am trying to straighten an image with the ruler tool, I keep receiving the following error:
Error 8800: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
- The command "Set" is not currently available.Line: 254-> app.activeDocument.activeLayer.isBackgroundLayer = false;
I don't understand why this isn't working because I have used this feature before.
Photoshop :: How To Straighten Postcard Photo Of Washington Memorial
Mar 21, 2011I am a photographer and I am trying to straighten a postcard photo of the Washington Memorial. I want to straighten the memorial without harming the rest of my photo (it is a aperture priority photo and I have flowers near my camera and the memorial in the background). So I want to highlight the memorial and straighten it- what is the best way to do this?
View 6 Replies View RelatedAutoCAD Civil 3D :: Straighten Curved Parcel Segment
Jun 19, 2013Is there a way to straighten a curved parcel segment? IOW Turn the curve in to a straight line.
I thought I has seen this coverd here before. But I can't find it.
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600