I have been editing a picture and I feathered the persons face in it but I cannot remove the selection line I drew around their face to do it. I now have the grey line going all around their face and I can't get rid of it.
View 1 RepliesThis is what I have. [URL]....
CS6
I used the magnetic and polyganol lasso tool to remove sections, after I drew a section, I pressed enter and then backspace, which made the section turn gray. But now it's just gray, on the same layer, and I can't do anything about it. I wanted an empty background under the image.
I can't use the magic selection tool because it DOES NOT select around the image properly (it selects INSIDE of the image) not where I cropped it out. And the magic selection tool is crappy. It leaves zig zagged white spots so why would I use that.
I cropped the entire thing out, and now I can't even see it without the background?
Ive just spent 20 minutes polygonal lassoing round an image and after I'd closed the lasso shape I found I'd accidentally set feather on 34 rather than 1.
Is it possible to remove the feather option at this point, or better still change it to 1, or am I going to have to re-lasso it all again?
I've tried adjusting the feather number but that doesn't do anything.
I'm trying to remove the blitz shadow from head and body on a white/grey background, with the Lasso tool. The adjustments with Brightness/Contrast in the chosen area works like a charm, however I always get a nasty pixeled or whitelined boarder going constantly around the edited area; no matter if it boarders to a black area (shoulder) or a gray one (wall behind person).
I've tried to edit the primary/secondary color, with no luck. Any way to make this boarder "blend in" to the new brightness area - or to just remove it? The edited area is somewhat identical to the old background, so there is no natural reason to why it should be a constant boarder.
Or is it a better (and easy!) way to remove blitz shadow from a black and white picture?
I created an interactive form in InDesign CC and do not like the check marks as they are not visible enough. Can I globally change the check marks to "X" marks?
View 1 Replies View RelatedI have an image, I was manipulating it, smudging etc. Then I selected the lasso to crop out the image. Then I wanted to go back and blur something else. But it wont let me. The lasso'd section of the image stays flashing, even when I double click it to stop it. I am stumped as to how to exit this function. I don't know why it doesn't just switch to blur when I press the BLUR button.
How can I get this to stop? It keeps interrupting my edits and I now have to do it all over again in a separate window as no matter how many times I undo the lasso section will not stop flashing!
I'm trying to clean up an image for a friend. He's a painter and his photo shows all the hatch marks of the canvas. I have tried noise removal but it doesn't remove enough. I have tried despeckle, destripe, deinterlace and antilais. The option that works the best is the oilfy filter but to achieve a good result I lose details in his painting.
I tried to do heal selection but it tells me Error: eval: unbound variable: plug-in-resynthesizer. When i go to the registry i find resynthesizer scripts URL.... I install the scripts but still get the message.
Any other tool or script that will be useful besides healing sections of the photo with the healing brush.
Gimp 2.7 now offers the ability to add crop marks to print outs.
However, where can I find the setting for how far they should appear from the picture's edge. I want to adjust the width of the bleed, which is 0 (zero) at the moment (which is completely pointless of course).
I just want to cut out/lasso an item in a pic and not have a black or white background..just the item itself..
I have *picked a photo
*click layer
*chose transparency
*added alpha channel*
*cut/lasso item out
*selected invert
*pressed delete on keyboard
*pressed select and none
I then get this picture which looks perfect right???
But when I copy and paste it or open file in paint or anywhere else it ends up like this? I want just the cut out and not the background too but no matter what I do the stupid thing comes with..
Is there a way to remove marks / pimples/etc without "corrupting" the rest of the image?( I mean without being obvious that the image was altered/processed.
View 3 Replies View RelatedI recently downloaded gimp and am in the process of getting used to it.
I have discovered something that is a bit of annoyance to me. when adding text to an image, I get the following dialog box over where I want to put the text.
I have set it to use editor under the text tool, but it doesn't remove the on-screen floating dialog box, also selecting use editor doesn't seem to stick, and it reverts back to being unticked upon restarting the program.
is it possible to remove this dialog box, as well as make the use editor method the default?
My beautiful baby has light glare in her eyes.
[URL]
I have a drawing that is 720X596 px and I have used the rectangular tool and select - invert, cut out a 222X444 px part that I need to save as a jpeg. However, I can not figure out how to either : delete the 720X596 drawing to leave the 222X444 drawing: or, select the 222X444 drawing to save it.
View 2 Replies View RelatedWhen i brought up my brushes dock, among the brushes was a little design I had cut out! How it got there but it is definitely not a brush. The drop-down menu for the dock had "delete" but it wasn't active/useable. How to get rid of that non-brush?
View 3 Replies View Relatedit is possible to remove a reflection (that is basically a duplicate of an already existing image, if the angle is good) from a photo. I have a feeling it might be possible, and involves layers and cloning, however I do not know how to get this done. Almost like a reverse-cloning tool. Sample picture provided.
Obviously a lot of factors are involved like glare and angle, but say you could see through the glass, and the reflection angle is a perfect 45 degrees or almost a exact duplicate of existing image, just flipped, is it possible to remove the reflection image and obtain more of the other side of the glass?
I have a bunch of images that look like and I want to 'restore' them like
Unfortunately that took an inordinate amount of pixel-fiddling to do and I have over 80 more of them.
Even more unfortunately, that was an 'easy' image compared to some of the others:
Another easier one
I know basically nothing about image processing and my current workflow looks like:
irfanview: convert to grayscale
ms photo editor: adjust contrast
ms pain: clean-up what's left Obviously this is inadequate for the task.
Source images ...
I jsut got gimp, and I am using it to make wallpapers for myself and my family. I have a few pictures of my favorite baseball player and I would like to make myself a wall with them, but they all have a watermark on them. I would generally try and find pics without the watermark, but I can't find anything because he is not a big name. How to remove the watermark from the images.
View 12 Replies View RelatedWhile drawing with a tool, normally you have:
1. the brush shape2. the mouse pointer
3. a little image representing the tool in use.
Is it possible to disable both 2 and 3?
remove couple annoying white edges around the transparent PNG.
[URL]
Solution :Here is what I did in GIMP (how to do it in PS):
Open the image
Add another layer underneath the first.
- sample the green and paint the new layer with it
Select the original and do "Alpha to Selection"
"Merge Visible Layers"
Add Layer Mask -> Selection
Apply Layer Mask
Save as PNG
- Important: In GIMP there is a checkbox option to save transparent colors. Make sure it is checked!Reimport into the SketchUp material and it should work (did for me).I want to remove all white edges , i'm okay with black edges.
I am trying to remove the person in the background of the attached image. I believe I have finally installed the resynthesizer plug-in but am not successful in removing the person behind the couple shown.
View 1 Replies View RelatedI have a nice .jpg, but the subject has stubble on his face. How can I make him look clean-shaven? Can I do that with GIMP?
View 2 Replies View RelatedI have a black text image. It has a dotted cut line (ex - - - - - - - ) boxed around the image. How do I remove it ?
View 3 Replies View RelatedI am trying to create a form with a watermark image in Publisher 2013 and the text I want to overlay on the watermark is cut from an image I screenshot, so it has a white background, making overlaying a watermark impossible. There are boxes and bubbles and other items that I really do not want to re-create so that's why I am trying to do this first, before re-creating the entire forms from scratch.
Anyway, what I want to do is A. remove all of the white from the background (even in the spaces between the e's an B's and everything; yes I know it is insane, but I like things to be perfect) and B. I would like to darken the text. Currently is is almost gray-ish and I want it to be black.
I took so many pics of her in this outfit and this is only one that was half decent but its blurry.
View 1 Replies View RelatedI have this image: [URL].......
I would like to remove the background from that. I read few tutorials but they have one color(shades of color) background and quite good contrast. They make hair white and bg. black. But in my image some hair are black and some white and they overlap each other. I found great plugin to Photoshop named Topaz Remask 3, but I haven´t PS.
I have chosen to use the eraser with fuzzy edge to remove the background from a dog subject. I created an Alpha channel and made a copy of the original image as suggested in the tute. When I begin to erase it works for a few stroke then stops erasing. By trial and error I found that If I select back and forth between the original and the copy it will erase a little on each but this seems to be an irregular way of doing the job and this is not what the tutorials show. What I erase shows up on both the original and the copy, that is they compound the erasing. Should this occur? Why can't I complete the erasing on just one image. While it does achieve the removal of the background I feel I am doing something wrong.
View 3 Replies View RelatedI created some text, and then immediately clicked text along path. it created some weird little pink pixely shape. if i keep clicking it it makes more. And i can't get rid of it.
It's above every layer, and it's not actually on a layer. If i hide, or even remove, every single layer it is still there. How can i delete these weird shapes that i erroneously made with the text along path tool?
[URL] it's that weird spot about mid screen, and the text in the bottom left. i just can't figure out how to remove that stuff
how to further sharpen this photo and further reduce noise
View 8 Replies View RelatedI have an animated gif in which I put in a transparent background on all the frames a long time ago. But the edges of the images were all anti-aliased, so the edges look pretty bad on a much different background. Now I want to change it back to the black background on each frame, and the origial file is lost.
I went through each frame and used Select by color to select the transparency, then Edit to fill the selection with black. However, most frames have a layer boundary that is smaller than the image size because the animation does not always fill the screen. The background on each layer/frame is still transparent. When I saved that work, only the current layer boundary in each frame shows - the rest is transparent. So instead of an unchanging size image with a black background, I get a variable sized one.
So I thought I would remove the alpha channel from each frame. That looks ok while the whole image is open in GIMP, but when I go to save it, GIMP puts the alpha channels back in each frame! I don't know why it's doing that. But I did notice that when I preview the animation with the alpha channels removed, artifacts are visible when the next frame is smaller than the one before it, so I don't know that it's what I want, anyway.
Can I change the alpha channel from completely transparent to completely black? how to make the blackgrounds transparent, but I can't find anything about undoing it.
My digital camera takes pictures with lines across the picture is there any good way to remove them???
These were originally straight lines but I applied a transformation on the picture to make the picture frame I took a picture of a perfect rectangle...
How can I remove the background from this image [URL]....... so that it is ready for editing in with a new background (need to create a mag front cover using this image).
View 2 Replies View Related