I'm making a spaceship texture and I got rivets, bolts, nuts, etc. brushes from here
[URL].......
Is it possible to "stamp" these brushes at regular intervals across a straight line? Instead of manually pressing them down one by one?
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
My Photoshop brush, pencil and Clone strokes are smaller than the cursor, which makes it very difficult for accuracy. Don't know what made them change, but want the cursor and stroke to be the same.
I've tried different settings in the brush dialog box, with difference tip settings, etc, with no results. Also, tried different settings in Preferences / Cursor setting.
How come the width tool can ne used on a path made by pen tool but not brush strokes? Is a brush stroke not a path??
View 4 Replies View RelatedI need do draw perpendicular lines at fixed intervals to a path. The path may be either open or closed. This is used as a symbol on maps to denote a depression with the perpendicular stubs pointing in the direction of the depression. Ideally, I would like the perpendicular lines to draw themselves as I draw the path.
View 4 Replies View RelatedIs there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies View RelatedI've made a pattern brush that I'm using to simulate a woods line for a boardgame map:
Shown above is the unstroked bounding box as well. To use this brush, I draw an outline of a woods mass with the pencil tool, then apply the brush and Expand Appearance. At that point I'm hoping the brush sections will join into one closed path so that I can fill it with a woodsy green, but instead the fill gets applied to each section of brush independently:
The join points seem fine - it's not like the two ends of the brush don't line up at all: EDIT - Actually, that's not just one point in the middle there - that's the ends of both paths lying almost on top of each other. It's possible to separate the two and then ctrl-J join them. Problem is, I want that single path automatically.
So how to get Illustrator to treat the resulting path as one closed path instead of a compound path?
How do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies View RelatedI've been using gimp occasionally here and there but never anything complicated. Now I want to make a text string appear along a path. I thought it would be easy, but after googling some how-to's I found a source of infinite frustration.
The thing is that the paths of string letters are almost never the way I want them to be. Although I tried a rather time consuming workaround for my task, it really bugs me that I was not able to use a built in feature.
Troubleshooting info: tried both gimp 2.8.2 and latest i could get 2.8.6 for windows, running win 7 x64
steps:
1. select path tool and create some path
2. select text tool and add some text
3. select the path created earlier from the Paths tab
4. Layer -> Text along path
and this is what I get (made the original path (red) and string's path (blue) visible):
After upgrading to Gimp 2.8, I am loving the single window mode. But the brushes are working a bit differently to 2.6.
I work, mostly, on A4 pages at 300DPI. So when I want to enlarge a brush, I like to use a custom shortcut to quickly upscale the brush so that I can to a large size quickly.
This happened nicely in 2.6. However, in 2.8, I can't find a way to quickly upscale the brush in the same way. I've created the same custom shortcut, but the upscaling takes a lot longer to reach the desired scale. It's a case of holding down the keyboard shortcut and then waiting while the brush gets bigger.
Is there a way to speed up that upscale motion?
EDIT: In other words, is there a way to make the "increase brush size more" function increase its increments?
I was getting brush lag for a few days after installing CS6. every 4 or so normal brush strokes, the brush would start to lag. And after a few lagging strokes it would go back to normal and then repeat itself.
The first thing I did was delete the work spaces that I never use (I doubt that fixed the problem).
Second thing I did was turn the cache levels to 1 and set image previews to "never save" (found this tip online, didn't fix the lag problem but I still kept those settings anyway).
The third thing (and what I believe fixed the problem) was going to "performance" in Photoshop, clicking on the advanced settings for your graphics processor and turning the drawing mode from advanced to basic.
I never had to do this on cs4 which is why it took a few days of tinkering around to fix the problem.
I recently tried the trial version of photoshop CS6, and the lines I draw in photoshop are more like series of little straight lines. I can draw better lines in Paint Tool SAI with no stabilizer, but no matter what I do in photoshop the resulting lines are finicky.
My (really not that good at all) PC
i3-550 processor
4 GB DDR3 RAM
Intel HD Graphics (no workstation card for me, unfortunately)
500 GB HDD
Windows 7 64-bit Home Premium
Lightroom is the ability to partially 'subtract' brush strokes using the ALT key, rather than deleting the entire brush stroke and starting all over again. Is it possible to do the same thing in Photoshop? If so, how?
View 2 Replies View RelatedI am working on a paint pallet and need to add brush strokes. I want to give the effect that some one whiped the brush through the paint and then dabd it on the pallet. Make sence? I hope so.
I am not done yet, I actually just started, but I couldn't figure out how to go about the brush strokes so I figured I would ask.
I need to use a brush to create Japanese style brush strokes - like Japanese calligraphy as exemplified in the link below....
View 14 Replies View RelatedAny ideas on how to duplicate the brush strokes in this collage that seem to integrate the background color with the individual pictures, making for a wonderful transition between background and pictures? I have tried it many ways without complete success. Attachment 17051
View 3 Replies View RelatedI have no problem dividing objects using the "divide" tool in the Pathfinder palette, but I was wondering if there was a way to divide brush strokes?
For example, let's say you wanted to paint three brush strokes right next to each other, but not overlapping. Is there a way to select all three strokes and then divide them so no one stroke resides over another, they would be completely separate of each other.
I am using a charcaol brush on a stroke in CS6 and when I pick a gradient it just turns the color completely black. The gradient works if I make the stroke basic though. I am guessing it is not possible for whatever reason? I also tried to recolor the artwork but couldnt find any gradient options in there.
I suppose a workaround would to maybe make a duplicate of the stroke, make it a basic shape and blend the 2 or something?
got an out of the blue commission for a t-shirt .... now I'm getting a crash course in Illusrator. Been using it all of one day.
Here's the trouble though - when I use my brushes to make actual brush strokes, the resulting paths look "grainy" - like they aren't vectors/paths.
From what I understand, even drawing freehand with the brush should produce vectored lines - and I can play with points within those freehand brush strokes. But when I zoom out, the strokes I drew with the brush look almost "pixelly", while the ones done with the pen tool look nice and smooth (I should note this is a custom brush that I made, butt the other paths that I've applied the brush to look fine).
Is this normal? Should I resign myself to having to go back over everything using the pen tool (there's a lot of fine, irregular line work)? Or is there some setting of the brush or special key that I'm missing?I know it's small, but you might be able to see what I mean where the main vertical line meets up with the angled line. The near-vertical is brushed in, the angled one is a path with brush overlay....
Used to be possible to create a brush stroke that faded out over its length. You could choose the number of steps it took to fade and by trial, create a brush that faded the way you want.
Can't find anything in any documentation.
Essentially when I draw a line in any drawing program, I am unable to produce clean smooth lines. I primarily use photoshop. All lines that are created have a jitteryness to them. I've uploaded two pictures one featuring when I have the issue and the other where I do not have the issue. It happens randomly and different things seem to fix it.
There are times where re downloading the driver works or sometimes making a backup of the driver and doing a restore works as well. There are even times where simply restarting the program that I'm using will fix the issue, but it always seems to come back no matter what.
At one point thought that maybe my video card drivers were all out of date but that's not the case. Originally the issue was happening on my tablet pc, so I thought that it was only related to that computer but then noted that it also was happening on my desktop as well when using my intuos!
I read that I needed to change to 8 bit, and I did and I still can't use the brush strokes filter. Is there anything I can do about this?
View 4 Replies View RelatedCS6 seems to only record a path and pen pressure for brush scrokes fails to record brush size and color. When Actions are played the stroke will play with the current foreground color and the current brush size not the color and the size that should have been recorded.
View 15 Replies View RelatedI just noticed that I am not getting any pictures in my dropdown menu of Brush Strokes, Sprays, or anything else.If I click on an empty box I am getting a brush stroke but I don't know what it is until I start to draw.
View 14 Replies View RelatedI am trying to find out how to create a textured background for old photos, either try faint crosshatching or a cracked paint look to give an antique look. Do I have to try to create my own texture?
Also.....I am looking into purchasing photoshop books & was wondering what you would recommend. I am looking for an easy to follow directions showing how to do special effects & blending layers to create a graphic collage with photos & clippings.
I have trouble recording the brush strokes in PS CS2. The record action feature refuses to record brush strokes and similar actions. I tried to create a path and use the 'stroke path with brush' feature but it doesn't record the path. Any idea on how to get this working?
View 1 Replies View RelatedThere is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
I've encountered a problem which is a first for me with Ai CS4, and that is I'm working on a cat illustration but I'm drawing hairs using a brush I've made that have anywhere from 4-5 strokes with multiple colors to mimic the look of hair. Everything was working fine until I used the hand tool to move the artboard around and the image pixelated a bit. Zooming in/out takes a bit of time as well, and then drawing any further strokes from a fresh boot now that I've saved my progress seem to be cached, then appear slowly one at a time afterwards.
I've got a Macbook Pro with 2.4ghz i5 cpu, 4gb ram, running osx 10.7.5. I'm wondering if I'm pushing the limits of the intel integrated graphics card. I have a Mac Pro at home with 8gb of ram although I learned recently that Ai CS4 only utilises 2gb of ram max. Regardless, my tower at home has a dedicated graphics card, ATI I believe.
System monitor reads 346mb free, 920mb wired, 2.03 active, 750mb inactive, used 3.66gb.
Trying to narrow it down to being operator error IE: too complex for Illustrator, or possibly the laptop hardware. I'd love to get back to work on this project of mine
Consequently the artboard size is 11.49in x 14.92in
way to make parallel shapes using the Path Tool similar to Photoshop?
I haven't used Photoshop in a while, but I remember that you could hold CTRL (on PC) and click with the Pen Tool and it would straighten up your shape for you once the paths are connected and would like to do similar in GIMP but can't find out how.
I've made fire brushes and want them to change color and shape over time in the animation timeline for a movie sequence. I've made a separate layer for the fire, but can't figure out how to make it so that I can change the shape and colors over time on the timeline. This is a 10 second sequence.
View 2 Replies View RelatedHow can I repeat the same clone stamp or healing brush marks on multiple images? I often shoot multiple versions of the same still life product and have the occasion to make the same brush strokes on each of a half dozen or so images. Most the time I use clone stamp or the healing brush.
Is there a way to repeat the same brush strokes on multiple images?