When I start using the drop shadow from the center out, the options such as the Drop Shadow Angle, Shadow Fade, and Shadow Stretch in the control bar on top are all grayed out. My friend told me that this is not supposed to happen.
View 4 RepliesCopy drop shadow properties is not working for me. When I click on the object to copy to, it tells me, "you did not click on an object." What do I need to do?
Edit: actually, I'm seeing that this is not working in Contour, either. And it may not be working in other effects as well, although I haven't tested those.
I am having a problem in CS6 Photoshop where I never experienced this in CS3-5.
I am designing a website and when I apply a drop shadow or inner shadow to a layer through layer style/blending options in the layers tab. It applys the same angle etc.. to all the other layers I have done styles too...
I will have 5 + layers done with styles and I will make a new layer and give it a shape, open up blending options and when I do a drop shadow and change the angle I literally can see everything on my layout change angles also when I move it around for just ONE layers style... What on earth is going on? This makes it impossible to make unique designs unless I keep flattening my PSD and transfering stuff over which destroys workflow.
I just applied a drop shadow to a shape and then went to apply to another and suddenly it's not doing anything.
View 2 Replies View RelatedPremier School 2013converted.jpg
In my new computer i have installed windows 7 64 bit and coreldraw x6 64 bit.
but when i export pdf drop shadow changes as shown in image.
problem with pdf 1.4 and above only.
I am using CorelDraw X4.
If I place a filled circular object with an attached drop shaddow on top a colored background, it appears as I expect on my monitor. If I print it, the print preview still looks correct, but the actual print shows a white rectangle below the circle and above the shaddow. It blocks part of the shaddow.
As viewed on monitor -
As printed -
How I could copy drop shadow to another object?
View 4 Replies View RelatedWhen I add a drop shadow to an object the color is preset to red. How can I change that color to black?
View 7 Replies View RelatedI often have the need to remove the drop shadow effect. Currently what I do is to "Break Drop Shadow Group Apart" then delete it from object manager. However with other effects such as Transparency, I can simply set the Effect to None. Can this be done with Drop Shadow?
View 4 Replies View RelatedOK Where is it? It is not in any of the tools listed, I have mine down the left side of the page. Do I need to go somewhere else and add the tool to the tool box?
View 8 Replies View Relateddrop shadow group.cdr
I've asked this in the X5 board before, gave up, and it's still bugging me with X6.
[URL].......
So I group a few objects, apply drop shadow to the group, and now I want to select one of the object in the group (to move it or resize it, etc).
I just can't find an effective way to do this without discarding the drop shadow, edit, and reapply the drop shadow. There have been many suggestion that seems to work for certain people, i.e. Ctrl+Click, Ctrl+Alt+Click, Ctrl+Alt+Shift+Click, but none works as desire.
In the attached example, I try to select the red square. If I Ctrl+Click, it selects the whole group. If I Ctrl+Alt+Click, it either selects the yellow circle, or edits the drop shadow.
If I Ctrl+Alt+Shift+Click, the result is random. It either selects the blue background square, or selects the yellow circle, or edits the drop shadow, and once in a blue moon successfully selects the red square.
I have 3 objects A, B, C, I group them together, apply a drop shadow.Now, let's say I need to resize or reposition one of them, I'm unable to select the particular object.
It's suppose to work with Alt+Ctrl+Click, but it doesn't.I always end up with editing the drop shadow rather than selecting the object. It's very trouble some needing to discard the drop shadow, make the changes, and re-apply the drop shadow.
I'm exporting files as .eps to print them with my roland printer using versaworks.
The problem is when i'm exporting files from my desk computer, (CorelDraw X6) and then I print it I have this problem. my bitmap components in the file are printed with many more pixel than before. and I don't know why.
Maybe since I updated my X6 version? It does that with files that contain drop shadow effects or transparency.
The thing is when i'm exporting the same file with my Laptop, using Coreldraw X5 and I then print it, I don't have this problem. So the printer's software is not the problem. I double cheked all my .eps exporting settings and they are the same in both computer.
You can see on these pictures what's right and what's wrong.
Drop Shadow.jpg
When I export PDF From Coreldraw X6 black color drop shadow appear in all plates.
Coreldraw X6
PDF preset : prepress
OS : Windows 7 and Windows XP both
I have attached both coreldraw and pdf separation preview file.
drop shadow BAD.jpg
I only added the good version of the what i am trying to achieve.
Here is the result we are actually getting !
I apply a red glow on an object (rectangle) on an black background.When exported as JPEG or PDF, the red glow color faded become greyish. I check that it's same when I turn the proof colors on.I've change different modes for the drop shadow but none gives the correct result.
This only happens in CMYK mode. When exported as RGB, it's fine.
Applying contour to a text and trying to apply a drop shadow afterwards, the drop shadow properties can not be set.
No matter what item you select in the Object Manager, the drop shadow toolbar's controls are all disabled.
PS: I just noticed this is true for the drop shadow tool in CorelDRAW X6.2 in gereral. I'm not able to edit any of the drop shadow properties.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Is not possible to apply Drop Shadow directly to a beveled object? I can get this only after converting object to bitmap.
[URL]
1. How can I turn off the default layer drop shadow?
2. How can I make the default layer a solid fill on open?
Why is it that I cannot add a drop shadow to an extruded and beveled shape? Is this one capability that CorelDraw X5 is lacking?
View 2 Replies View RelatedWhen I group a few objects together, and apply drop shadow to the group, I cannot edit the individual object in the group (cannot pick it to move it or resize it etc) without removing the drop shadow.
View 15 Replies View RelatedAfter applying drop shadow to a text, I find no direct way to edit the text without removing the drop shadow. I've tried the text tool, Ctrl-Click, Alt-Click, Shift-Click, etc, maybe I missed something.
View 4 Replies View RelatedX4. When I add a drop shadow to anything the variable attributes do not appear on the property bar, ie "flat bottom right" at top left and then the choice of colours etc. I know by now where they are so click on where I think they are, but it's annoying. I have deleted, run a reg cleaner and re-installed + added the SP2 updates.
View 3 Replies View RelatedI have created a drop shadow on a green background.
Shadow Black value being C - 0 M - 0 Y - 0 K -100.
In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View Related1. Black drop shadow does not appear black when Publish to PDF
2. The object beneath the drop shadow will appear as show below:
I've tried to convert the drop shadow to bitmap but the result is same.
I drew a box, then applied a drop shadow going to the right. I duplicated the layer, then dragged it to the left of the first box. I edited the drop shadow to go to the left, and it changed, but so did the first one. I cannot get the two drop shadows to go in different directions.
I've tried different things, drawing separate boxes, etc. but it still will not work.
Does anyone know why this is happening or why I can solve it?
How can I get this type of shadow that fades and goes in that direction?
View 3 Replies View RelatedI'm building a web page and wanted to add some drop shadows to my photos to make them pop a little. how to add a drop shadow,
1.First way was I selected the entire photo and tried a layer effect. Didn't work.
2. Then I created a new layer that was a rectangle. put it behind the background copy and tried to add the dropshadow to the rectangle thinking it might show up from behind the bg layer. I couldn't even add the drop shadow to the rectangle.
When i apply a drop shadow to one layer, then add a drop shadow to another layer, their directions stay linked so when i change the direction of the 2nd shadow, the first one moves too. Why is this?
View 2 Replies View RelatedI would like to add an even drop shadow all around an image. But when I move the angle from O to 180 degrees the shadow moves. I want to make the drop shadow the same at 0 as at 180.
View 2 Replies View Related