I have a ai file that I can not seem to be able to openup in coreldraw. I have tried converting it to eps from an Illustrator program but still does not make any difference. The file comes up with an error occurred when processing and file connot be opened. Most of the AI files I get open up with coreldraw easily but there must be something different with this one that is stopping it from opening.
View 5 Replies
I am running the Coreldraw x6 suite on a PC laptop (I7 16GB ram 64bit) on Windows 8. I haven't had any issues lately until last week when it just crashed every time I opened a file. I tested it and if I create a file with just shapes in it, then it's fine. As soon as I add a font into the file it crashes and shows the attached image.
I checked the latest window updates and there hasn't been one recently that could have affected it. There was one for Flash and I removed it but no difference. I haven't made any changes to my computer in the last 2 weeks that could affect it and I don't have any viruses or trojans. I have also removed the Windows update from a while back that affected Coreldraw fonts.
I've even resorted to uninstalling and re-installing X6. I tried running the fresh install and the same thing happened again.
wrap.cdr
I set wrapping to the big A-letter to "Above/Below" and save file.
After opening the wrapping is in "Straddle Text" mode...
I am working with columns of paragraph text and this thing makes me very angry, because I must re-set this objects' wrapping mode to compensate text flow-back.
OS : Windows Vista Home Basic 32bit
Corel draw x4 starts up fine, when you either pick a template, open an existing file, or click the new drawing button the mouse pointer becomes the circle and it says Processing at the bottom right corner of the screen, the status bar next to processing does not progress at all and it just stays like this until i close it. It says (not responding) in the top bar.
I have downloaded the updates from corel draw and have also un installed corel draw and re installed it and it is still the same.
I have several Coral Draw-12 files saved in a particular folder. The problem is when i am trying to open a particular file it's fine but, when trying to open a second or third .cdr file (with the first file opened) from the same folder it' s not opening.
View 1 Replies View Relatedi have a problem with CorelDraw X5where the file i open is bigger than A4 and on a custom set page size. and it opens like this.and in signcut it is
i need to edit the file and i dont know why coreldraw X5 is not letting me view the entire file. How i can overcome this or if there are any settings that i may have chanced of hot key shortcuts that i could have pressed by accident. also i have been using draw x5 for about a year put i only use half the program for what i need it for.
i installed coreldraw x6 about two weeks to try and i liked it so much and my windows gone down and when i reinstalled windows and reinstalled coreldraw and tried to open a file was created with coreldraw x6 it give me error and program closed.
the problem is:
Problem signature:
Problem Event Name:BEX64
Application Name:CorelDrw.exe
Application Version:16.1.0.843
Application Timestamp:4fff8c8c
Fault Module Name:CdrFnt.dll
Fault Module Version:16.1.0.843
Fault Module Timestamp:4fff8cc6
Exception Offset:0000000000009181
Exception c0000409
Exception Data:0000000000000000
OS Version:6.1.7601.2.1.0.256.1
Locale ID:4097
Additional Information 1:2ac4
Additional Information 2:2ac4c22809adbef32ecbe94fc4b7c7b9
Additional Information 3:d787
Additional Information 4:d787405ff983cb0cc3e60c8be69cf6a8
Read our privacy statement online: [URL]........
If the online privacy statement is not available, please read our privacy statement offline:
C:Windowssystem32en-USerofflps.txt
I'm trying to open a large file (1.2gig) but corel is having a error reading (dialoge box pop up). I have another file 1.19 gig which takes a few minutes to open but is fine.
I have 2gig ram so just wondering what the limit for file size in x3 file is? The file in question was running sweet yesterday so I didn't realise it was so large.
Is there any way to recover the contents ? I can see it in preview so I don't believe it is corrupt....the back-up has the same issues.
I'm running Windows 7 64bit on a relatively high end PC: 2.65 gigahertz Intel Core i7 920, 6 GB ram, NVIDIA GeForce GTX 295 [Display adapter] (2x) in SLI, etc...
So when I attempt to open eps file, it simply hangs, and eventually says NOT RESPONDING. As I type this I've been attempting to open a file for over 30 minutes. I've tried rebooting to no avail.
I have cdx5 (fully patched) running on a windows 7 pro x64 machine (c++, directx, updates all current) that has an issue when saving a file to a mapped network drive. The file will save error free but when you try to open the file again at a later date it gives a c++ runtime error (this application has requested the runtime to terminate in an unexpected way).
If i save the file locally then move it to the network share it seems fine. It can be opened and edited with out issue.
CDx5 needs to save to the mapped drive as the server runs onsite and offsite backups. There is a large volume of files that are changed/created daily. Saving locally and then copied to the server manually is also not an option as the user cannot be relied upon to ensure the files are copied to the server.
Some colors such as yellow are being replaced with other colors in the CMYK palette.
View 4 Replies View RelatedCan Quark [or Quark Express] open a CorelDraw file and preserve all of the settings like the exact distance from the curves or text to the edge of the canvas?
I have CorelDraw X6. I work for a small business that sells business cards and letterhead to customers.
I have been sending camera ready artwork to a printer. The printer opens the file with I think a Quark, or maybe a Quark Express, program.
They save the file in PDF format and then e-mail me the PDF file as a proof.
Almost always crucial settings like the distance(s) from the curves or text to the edge of the canvas has been changed in their PDF proof file.
For example, I might send them a CorelDraw file where the text at the bottom of a page is set .350" from the bottom of the canvas. The proof that they send me might be .4" or .5" from the bottom.
Today, a woman with the printer told me that their software would not preserve the exact CorelDraw settings when their software opens a CorelDraw file and that there is not any way for them to know the exact CorelDraw settings.
I find that hard to believe. How will Quark open a CorelDraw file and preserve all of the settings or are some of the settings, like curve/text setback from the canvas, lost?
After updating silverfast software to a newer version then SF-8.0.1r24(AFL)_x86, Corel X5 and X6 did crash when opening a file.
It didn't uninstall Silverfast or to reiinstall Corel X5 or X6.
Only reloading th whole computer (Windows 7 Pro) from an earlier image did work. But when installing the silverfast Update, the same thing happened.
Silverfast says, they don't install anything into Corel suite. I should ask Corel about the problem ...
Everything else keeps running fine after the silverfast update.
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
View 8 Replies View Relatedi'm trying to edit a Catalog (PDF format) which i generated using a Report Writer.
Err- Internal Filter Error.
The 1st time round, i didn't get this error. I edited the PDF with some graphics,etc..
I then made some changes to the report using Report Writer & now it's NOT opening.
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies View Relatedwhen trying to reopen a file from the "recently used" file list? When I try to click on a file from the list it gives me a message stating "error opening file". I know this will happen if the file has been moved to another location, but the files are in the same place as when I originally opened them. None of the files in the list will open anymore. Is this a pathing issue?
View 9 Replies View RelatedWhen trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
A fellow co-worker accidentally checked the box that says "don't open this file" (or something like that) that appears when a language file is missing upon opening a file from a client. He then also "accidentally" clicked the "perform this action every time" so as the warning window wouldn't appear any more. As a consequence there are now files that we cannot open on that computer. I've searched through system variable lists and come up empty handed.....
View 1 Replies View RelatedI noticed, that in X4 my file ( in which I'm working) is lost, if I open a new file from the organizer.
In older versions, I could have a lot of pictures on my screen and switch between them.
Is this a "bug" in X4, or is there a way to put this feature back like X2.
Hope the question is clear??
By Opening File into AutoCAD I can set the Custom Property(dwgname,dwgid,projectname) of the File. But I want to set value of these properties without opening AutoCAD application.
I can set it using:
public void SetAttributes(Hashtable hashTable,String fileOpenPath){
Document Doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.Open(fileOpenPath);
Can we create this Object using any other way??
Database Db = Doc.Database;
DatabaseSummaryInfoBuilder DbSib = new DatabaseSummaryInfoBuilder();
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = Db.TransactionManager;
using (Transaction aTran = tm.StartTransaction())
[Code] .......
I was sent a file from AI for reproduction in .eps format. Corel X6 distorts the art on import or open. The same file given to me as a pdf is fine. Corel Draw's strength is it's import abilities, and I expected X6 to cope with anything Adobe could throw at it from current releases.
View 14 Replies View RelatedMost of the ai files I receive show to be compressed and I cannot do anything with them. I think I should be able to open them with CD X4, which is installed alone and also in a bundle with my Wilcom digitizing program.
Someone indicated that the two installations on one computer could cause problems, but it is convenient having both readily available.
i use corel x4at home load my files onto a flash drive ad ake them to work where we use x3 and i cannot open my cdr files.
View 1 Replies View Related When I open a file the program crashes. It doesn't matter what file, they all cause the program to crash. It seems that X6 just cannot create the work environment unless it starts from scratch.
The solution I have found is to start a new document first and THEN open the file I want. After that, everything is fine. I can open any files I want all day with no crashes. Kind of weird, but what the heck..at least it works. By the way, my files are typically small (less than 2MB) composed of a few jpegs, some text, and some simple vector shapes.
I am using the 64 bit version of X6 on a 64 bit pc running Windows professional with 8GB ram.
Corel Draw X6 and they crash the program each time. I've tried this on both the 32-bit and 64-bit Windows versions with the same results.
View 12 Replies View RelatedI have a lot of pdfs that are A6 format, and need to keep them this size. When I open the document in Coreldraw they open as A4 page (looking at the document properties (although it does look like its the A6 size with a lot of white space around it.
How can I get corel to open it to the correct A6 page size?
In CorelDraw files, the color palette varies from one artist to another based presumably on the version of Corel. If one artist opens another artists files, some of the color (mostly black) appear as clear/white/invisible. Colors appear normally, however, for the artist to whom the file belongs.This may be also related to an issue with "black boxes". An artist opens an old color separation file or a color separation file created by another artist, and the color separation dialog tab in the print dialog shows multiple check boxes for "undefined" colors. These print out as blank color separations regardless of whether the box is unchecked.If all of the art is selected on the page, cut and pasted to a new page and the old page deleted, the undefined black boxes cease to exist.
View 6 Replies View RelatedI have several book cover designs that I've been working on in CorelDraw saved as CDRs, but now when I go to open them, they open as CDRs in Corel Photo Paint, I don't understand why? I've tried the Open from File Menu and then Save As CDR , but it doesn't work either. Is it possible I clicked on something I shouldn't have? Also, I need to separate the background from one of the designs in bitmap, the image is as if its all grouped together and won't ungroup or let me edit it, I did not save in layers or masks (any other way I can still try and edit it?
View 5 Replies View RelatedSome of you might also have encountered the nasty issue of CorelDraw (CorelDrw.exe) to open a new instance of CorelDraw for every CDR file being double-clicked for opening. After twiddling around and searching the web, I finally found out that CorelDraw.exe is case-sensitive for DDE commands. As such, using the DDE argument 'Open("%1")' won't do anything.The solution for CorelDraw X4 (CorelDrw.exe) is:
Application used:"C:ToolsOfficeCorelPROGRAMSCORELDRW.EXE" -DDE "%1"
DDE Message:[O("%1")]Application:CORELDRW_MOSDDE Application not Running:<empty>Topic:System
Corresponding registry file:-----------------------------------------Windows Registry Editor Version 5.00[HKEY_CLASSES_ROOTCorelDRAW.Graphic.14shellOpen][HKEY_CLASSES_ROOTCorelDRAW.Graphic.14shellOpencommand]@=""C:\Tools\Office\Corel\PROGRAMS\CORELDRW.EXE" -DDE "%1""[HKEY_CLASSES_ROOTCorelDRAW.Graphic.14shellOpenddeexec]@="[O("%1")]"[HKEY_CLASSES_ROOTCorelDRAW.Graphic.14shellOpenddeexecApplication]@="CORELDRW_MOS"[HKEY_CLASSES_ROOTCorelDRAW.Graphic.14shellOpenddeexecTopic]@="System"
