Setting the boundary after editing an eps graph (for example, combining several eps into a single one) in X5? I remember it seems quite easy in X4 for this, by just drawing a rectangular around the graph.
View 4 RepliesI am having a problem when printing out an item. when i first started there was no background graph looking stuff, its very light but i am afraid that it will do something that i don't want when i go to burn a screen, did something get changed in my program, there was another person using it recently, and now i am getting the background,
View 6 Replies View Relatedin coreldraw x5 create boundary is not available. do any body knows about it..
View 4 Replies View RelatedSo, I understand the Boundary feature. However, I was wondering if there is a way to have the Boundary trace the inner detail?
Example. I want to create a boundary of the doughnut hole; not the outside of the doughnut.
it seems like this much be simple. I have a text box and I find the fact that CDR displays the boundary box distracting. Can I not turn this off?
View 9 Replies View RelatedLet's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
View 5 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedIm using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View RelatedIllustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
View 4 Replies View RelatedI have a column graph. I want the data values to display in the columns. How do I do that? Here's what I have now:
I want the values 270018, 283148, etc. to display in the graph. Is that possible?
I'm totally new to Illustrator and want to use the line graph tool to insert a graph that passes through 0,0 and runs to 24,24. I want the x and y axes to meet at the origin. As it isn't working as you can see. I've used 0, 0 and 24, 24 as my data points. Is there any way I can change how this is presented so it's clear that it's at the origin?
I'm using CS6, if that matters.
how to export png from corel?
View 3 Replies View RelatedWhere is the QR panel on X6.3?
View 2 Replies View RelatedI'd like to start using Capture but it won't let me assign a hot key - it says "This hotkey is being used already by this system. Please choose another one"
As others have reported - you can't assign any key combination, and the application is useless.
is there a way to capture and by pass this problem?
I did find a solution on the Internet that says to uninstall SnagIt and remove references to TechSmith, but I'm reluctant to do that until I find out that Capture works.