CorelDRAW Graphics Suite 12 :: VBA Method For Curve Smoothing?
Aug 19, 2011looking for a method to run curve smoothing
View 4 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X5 :: Combine Method - Convert To Curve And Smooth Node
Mar 9, 20112commands.gif
vba code by combining these two commands (convert to curve & smooth node)
to put them in a VBA Code for a separate module and to assign a shortcut and use them
CorelDRAW Graphics Suite X5 :: Smoothing Out Fonts To Laser Cut
Apr 8, 2012I have graphics suite x5. what im trying to do use fonts (curly fonts) to make signs to cut out with my cnc laser. My question is now for i smooth off all the rough edges so when i cut them out there smooth and free flowing .
If there are better fonts to use then others or is there any easy way to smooth /soften the curves ?
CorelDRAW Graphics Suite X5 :: Reducing / Smoothing Nodes?
Oct 18, 2011Trying to recreate logo. Traced text. The text is too rough. I've selected it, click the shape tool, and the Smoothing bar does not work. It stays at "0" and does not effect the selected curve.
I've tried just drawing a shape with jagged edges and the Smoothing bar still does not work. Am I missing a step to make the Smoothing bar apply?
CorelDRAW Graphics Suite X4 :: Interlocking Rings Using Intersect Method
Mar 23, 2011Is there an easier method of interlocking rings? I am using the intersect method....but it takes too long.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Curve The Image
Nov 2, 2012I have the following product label for a customer and need to know how to curve the top rounded like it is, from using a rectangle photo.
View 4 Replies View RelatedCorelDRAW Graphics Suite X5 :: Convert To Curve (with Handles)
Mar 23, 2012Is there a way to convert to curve (with handles)? I Ctrl+Q on a object, then it say convert to curve. But it's a bunch of segments. When I drag them they don't have curve handles, they don't curve. I have again to click on a segment, a * appear. Then click To curve in the property bar.
Can I just put curve handles in one shoot to all the segments of a object (ex a square)? Without to have to do all 4 segments one by one?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
CorelDRAW Graphics Suite 12 :: Colour Fill Under A Curve
Feb 23, 2012I have created a curved line across my page using the Bezier tool. I need to fill the page below my curve to make it blue (and above the curve to stay white).
View 8 Replies View RelatedCorelDRAW Graphics Suite X6 :: Curve Lens Not Being Exported To PDF
Aug 19, 2013I am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
CorelDRAW Graphics Suite X5 :: Curve Object On Status Bar
Sep 18, 2013I have this weird problem where some objects won't work like the usual. The original pic is like this,but when I see it in thumbnail in windows explorer, some objects are missing but they're still there when you open the file!
I marked the status bar, in those missing objects it says "Curve on Desktop" while other objects of corelDraw, no matter what kind of file, they're always written as "Curve on Layer 1".
And then when I Ctrl+G all the objects above in pic 1, all those objects with Curve on Layer 1 and Curve on Desktop, it becomes like this: I don't know what happened. When I made the shape in the 1st pic, I used old file with similar shape, I only edit the sizes & the colors, but previous File is just fine, only this one looks weird.
CorelDRAW Graphics Suite X5 :: How To Draw Line Not A Curve
Feb 26, 2012I used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
CorelDRAW Graphics Suite X4 :: Calculate Length Of A Curve
Jan 18, 2013Can CorelDraw X4 calculate the length of a curve, meaning if I have an organic shape or curve, can it calculate the true length of the line if you follow the path. (think miles on a road)
I'm trying to estimate the time it would take a CNC machine to cut along an exported path.
CorelDRAW Graphics Suite X5 :: Line Vs Curve With Arrow On End?
Feb 12, 2011I know this has been in Draw for a long while, but I wish they'd make the arrow tip start at the end of a curve.
steps to reproduce:
F7, draw a curve
draw a line
change both to have an arrow on one end
change both to 16px thickness so you can see the arrow position well
This problem comes up when I'm doing a detailed diagram and I've got my arrows going around all over the place. I need to tweek one so I convert to curve... but in doing so, the end of the arrow sticks out farther than it used to... and that forces me to change the postions and angles of possibly a few nodes.
I'd like the arrow to end at the node so there's no change in it's position when you do a convert to curves.
This is one of those... "that's not a bug, it's been around forever" type of things I know, but it should be changed IMHO.
I should mention that this is also a pain when you go in with the node edit tool when the line isn't selected and you can't see the nodes... you click around at the end, and eventually find it hiding in the center of the arrow/triangle part.
CorelDRAW Graphics Suite X6 :: Selecting Curve Flyout Default?
Nov 12, 2013Is there any way of modifying the Curve Flyout menu such that the Bézier tool becomes the default? (rather than the Freehand tool which I seldom use? I can't see where to do this in the Customize dialog.
View 10 Replies View RelatedCorelDRAW Graphics Suite X6 :: Macro To Round / Curve Text
Aug 24, 2012Here's a macro I've used for quite some time. Feel free to use or modify as needed. Install, select text and run. Hold shift and the selected text will round/curve more.
Why I created? I do a lot of graphics that need the top line of text to be curved. I can easily select the top line and press a button and the macro curves it upwards. If I need more curve I hold shift and run. If I need more or less curve still, I make the item in question, the text, larger or smaller. All done by eye and it's fast.
#If VBA7 Then Private Declare PtrSafe Function GetAsyncKeyState Lib "user32" (ByVal vKey As LongPtr) As Integer#Else Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer#End IfPrivate Const VK_SHIFT = &H10Public Function ResetKeyStatus(Optional nada As Boolean) As Boolean
[Code] .........
CorelDRAW Graphics Suite X3 :: Making Nodes On A Default Curve
Oct 3, 2012This has been a feature in CorelDraw for as long as I can remember so I'm hoping that buried in options or customize it can be changed.
When you draw a curved line, the nodes default to Symmetrical rather than Smooth. Symmetrical nodes adjust both sides of the curve when you move the node selection handles which I rarely use. Smooth allows you to adjust once side of the node without effecting the other but still maintaining an in line alignment.
if you can make nodes on a curve default to Smooth rather than Symmetrical?
CorelDRAW Graphics Suite X5 :: Making Pattern Of Existing Sketch Along A Curve
Oct 25, 2012I am struggling to make a small pattern go along and follow the curvature of a curve. Its shown below. The green dots and the dumbell shape are a group and need to follow the contour of the violet colored shape on its edges. So they have to look like they are following the curve. I have tried repeat patterns and so on but they do not follow the curvature of the edge/sketch.
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: How To Import List To Draw Spectrum Curve
Jul 2, 2012I have the list of x,y coordinates for the CIE colour spectrum. How do I import the list so as to draw the spectrum curve?? The curve is the horseshoe shaped curve shown in the figure below [not the straight lines which are colours boundaries] that contains all the spectrum colours. Seems to me I should be able to import the list somehow and CorelDraw would then produce the line.
View 10 Replies View RelatedCorelDRAW Graphics Suite X6 :: Arial Font Get Italic While Converting It To Curve?
Oct 16, 2012when i converting my arial font to curve it automatically convert to Italic i have replace my arial font from other machine as well but still the same issue.
i am using Corel Draw X6 which is updated
Os Win 7 (updated)
CorelDRAW Graphics Suite X5 :: Auto Join Close Curve Nodes?
Jul 28, 2011Is there an automated way to have all the nodes in an (open) curve that are close to eachother to either join or connect with a line ?
"Auto close" dont offer settings and doesnt seem to do this
CorelDRAW Graphics Suite X5 :: Revert Master Or Clone To Ordinary Object Or Curve?
Jun 13, 2013Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedCorelDRAW Graphics Suite X4 :: Import List Of X / Y Coordinates To Produce Complex Curve
Jul 2, 2012How do I import a list of x,y coordinates to produce a complex curve in CorelDraw x4?
View 1 Replies View RelatedCorelDRAW Graphics Suite X4 :: Saving Tone Curve Settings Saved In Different Directory
Mar 31, 2011CorelDraw X4 sp4 w/ hotfix
Why is it that when in Draw save the tone curve settings it saves in a totally different directory? Then if I want to open that settings file it takes me somewhere else showing default styles/settings (*.crv)?
CorelDRAW Graphics Suite 11 :: Why Curve Get Broken When Use Artistic Media Tool To Bold It
Sep 12, 2011I made an elipse and changed it to arc.
Than I used artistic media tool to bold it but the arc get broken.
The arc I am talking abouth is Yelow. Red circle is showing a plece where arc get broken.
CorelDRAW Graphics Suite X4 :: How To Curve Text Within Paragraph Text Block That Is Predefined Shape
Apr 28, 2011how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
3ds Max :: Curve Smoothing When Importing From AutoCAD
Sep 26, 2013When I import a 3D model from AutoCAD to 3dsMAX I can slightly adjust the smoothness of the curves to keep the original design curve, utlizing the import options; however it still looks a bit edgy. What are some better techniques to maintain the original curve smoothness of objects when importing from AutoCAD to MAX?
View 9 Replies View RelatedCorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?
Dec 1, 2010We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly
Sep 5, 2009Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics
Jul 21, 2013i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size
Nov 9, 2011I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?