AutoDesk Smoke :: Set YUV / Headroom As Default
Oct 10, 2012Can I request that we set YUV + Headroom as a default.Should this be set at time of creating the project?
View 6 Replies
ADVERTISEMENT
AutoDesk Smoke :: Export YUV Headroom Enabled Footage
Jul 19, 2012There is an issue with footage that needed the YUV headroom to be turned on when importing.What happens is that when this footage is exported, it get crushed blacks. So there need to be a YUV headroom setting for the export I believe. Maybe I am seeing it wrong.
Footage is MXF Panasonic HPX171 (DVCPRO HD 72025PN) footage.
AutoDesk Smoke :: ProRes RGB 4444 12bit Files And Headroom
May 15, 2013Am I right in assuming that YUV Headroom should only be enabled when importing YUV 422 10bit files?
How does Smoke deal with RGB import of 4444 files? I am hoping it is similar to Resolve & imports the full range?
I tested this by importing with & without headroom & exporting dpx of both. I then compared these to the full range imports in Resolve & the dpx derived from not enabling headroom was the match.
I ask this as I want to ensure my comps go to Grade ok, and the colourist is happy! Last time I did this we were working with 422 10bit files & I had to enable headroom in Smoke in order to match Resolves 'full range' import.
AutoDesk Smoke :: Using Twixtor As Default Instead Of Timewrap
Oct 4, 2012Is there a way to set Smoke to default to using the Twixtor spark instead of Timewarp?
My current project is a documentary that will run approx 90 minutes. The main format is 1080p 23.976, but there are a variety of file formats and framerates within the edit. The plan is to finish the offline in Media Composer, then send an AAF to Smoke for the online. As there will be a lot of clips that have speed and frame-rate changes, I would rather not manipulate each one individually.
AutoDesk Smoke :: Recovered Media Folder In Default Library
Jan 18, 2013Most every time I open a project I'm working on I get a Recovered Media folder in my default library. What is this media that's in this folder? Should I get rid of it or leave it?
View 1 Replies View RelatedAutoDesk Smoke :: How To Set Gmask Default To Create Linear Points
Nov 6, 2012Is there a way to set the Gmask default to create linear points as opposed to the bezier curves?
View 2 Replies View RelatedAutoDesk Smoke :: Possible To Change Default Configuration Of Wiretap Server After Install
May 7, 2013Is possible to change the default configuration of the wiretap server after install?I need to make it work on another port than 80.
View 1 Replies View RelatedAutoDesk Smoke :: Smoke And AJA Dual Stream Stereoscopic Output
Aug 29, 2013I know that the AJA Kona 3 card has 2 outputs. Can Smoke send one eye to one channel and the other eye to the other of the Kona 3 card? Dual Stream output is what I am really getting at.
View 4 Replies View RelatedAutoDesk Smoke :: Smoke And Sub-blacks / Super-whites
Feb 26, 2013Is there any way that Smoke can see/output sub-blacks and super whites? Can't find any way of seeing them on my scope, Smoke just clamps everything. It won't even see anything below zero in order for me to make a correction on it, everything seems to be clamped on import. I'm using ProRes HQ footage.
View 9 Replies View RelatedAutoDesk Smoke :: Best Plugin To Do Spline Warps In Smoke
Jan 16, 2014What is the best plugin to do spline warps in smoke?(need something like the distort in flame) I notice revisionfx don't make a warper for smoke on mac.
View 7 Replies View RelatedAutoDesk Smoke :: Importing And Using Alpha Channels In Autodesk
Oct 2, 2012I am experimenting with Smoke 2013 pre-trial and I am having issues with importing images and video with alpha channels.
1. If I have a layered Photoshop file or png with an alpha channel (a still frame lower third), I see that I can import it as a multi layered clip, but what is the best way to have it in the sequence to show up properly?
2. If I have a QuickTime in animation format or Pro Res4444 format with an embedded alpha, how can I import that file to show and cut it on a top layer to animate above my video?
AutoDesk Smoke :: Can Smoke Support OFX Architecture
Oct 18, 2012Can Smoke support the OFX architecture?
View 1 Replies View RelatedAutoDesk Smoke :: Selections In Smoke As In Combustion?
Jul 10, 2012Does Smoke have selection functionality similar to that of Combustion? As an example, you might want to selectively blur part of an image. In Combustion, you would draw a selection and then apply an operator above the selection to achieve this. I don't see a similar selection tool function in Smoke, but I imagine you could achieve the same effect by duplicating a layer and using a Gmask via the Wipe timeline FX.does Smoke not have a selection tool similar to Combustion?
View 3 Replies View RelatedAutoDesk Smoke :: Importing TWs To Smoke
Jan 10, 2014Whats the dealing with importing TWs to Smoke? I have a show that's 70% keyframed with timewarps and need a way other then baking the effect to bring it into Smoke. It's comming from FCP7 and we have Automatic Duck but neither the XMLs or AAF bring anything other then the first speed of the clip. Any way to retain the keyframes?
View 1 Replies View RelatedAutoDesk Smoke :: Run Flame Over VPN
Oct 27, 2013Is it possible to run Flame or Smoke over a VPN? I mean, is it possible to get a license over VPN?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
AutoDesk Smoke :: Takes All The Available RAM
Aug 5, 2012I tried Smoke 2013 PR2 on my MacBook Air 11".
It uses all the available RAM that is 4GB.
Same experience with Smoke 2012 on my MacBook pro 13"".
Is that normal?
AutoDesk Smoke :: EXR Look Different On Import
Nov 14, 2011I have RED footage which I exported as EXR. When I import them back in, they look exactly like the RED footage. But when I import the EXR in Fusion, export it back out, and then import that EXR into Smoke, it looks brighter, although I didn't change anything in Fusion. (when I compare the EXR from Smoke and the EXR from fusion in my finder on my desktop, they look exactly the same). So what is Smoke doing with the "foreign" exr on import?I was also playing with the LUT settings. I get a result which is close, but I need to be exact.
View 6 Replies View RelatedAutoDesk Smoke :: Where To Set Context
Jun 27, 2012Where do you set context in batch in the 2013 prerelease?
View 9 Replies View RelatedAutoDesk Smoke :: Exporting XML From FCP
Oct 29, 2012When I export a XML from FCP 7 all of my files come over and link but there is no video with my HDV files (1440 x 1080) all of my other files (Canon FX etc) come over fine.
View 9 Replies View RelatedAutoDesk Smoke :: HD To SD Down-conversion?
Jun 4, 2011What is the best way to downconvert 5D HD to SD?
I converted the h.264 files to uncompressed 10bit. Bringing in the footage and XML was fine, but as soon as I resize to PAL (the timeline was changed to PAL, as was the output on the AJA) the picture starts anti aliasing in detail areas. I have processed this with every filter in Smoke with no satisfactory result.
AutoDesk Smoke :: How To Import XML
Jul 7, 2013I am having issues for a long time regarding importing XML into smoke 2013. Will try and explain you in breif.
First When we try an import XML into smoke it just doesnt do anything, in the message history box it comes up saying FOUND 0 SOURCES.
Nothing gets imported at all. No footage is imported, nothing is shown in timeline as well.
Second For a different project when the XML does get imported, the videos get imported but then again nothing is coming up in the timeline and in the message history box we get the following error.
XML Validation Failed.
Cannot process unliked media.
we have checked all the import options to make this work, including max up level and the rest but nothing is working.
AutoDesk Smoke :: Better Interactivity In CFX?
Aug 16, 2013I must have changed a setting because today my interactivity in CFX has taken a hit, specifically when making Axis moves. The move doesnt register until after I have made a change in the Axis field.
I know there is a setting for this but cannot remember. Am not having the same issue grabbing Axis in viewer.
AutoDesk Smoke :: How To Conform XML From FCP 7
Jun 7, 2012I'm currently trying to conform an XML from FCP 7 into Smoke 2012 (Linux). The issue I have is that the files I want to conform with are MFX, however the files used in the FCP timeline are PRORES, therefore have a '.mov' extension. This means the Smoke is not seeing the MXF files due to the extension & the only way around it I have found, is to edit all of the '.mov' extensions to '.mxf' extensions in the actual XML. This works well, but is a complete nightmare, particularly as I'll have to do this for 13 half hour episodes!!!!
I have tried all the different combinations of Filename, Timecode, Tape, etc, but none work due to other metadata issues from the filming of the footage to it being delivered to our edit suites!!!!
Any way of making the Smoke ignore the file extension?
AutoDesk Smoke :: Deleting Fx History
Nov 22, 2012Can i remove the fx history ? for example i render a cfx clip. then i want to keep the render only and disconnect the relationship with its 'cfx history' . And is there any practical benefit of it ? You maybe will ask me : 'why do you wanna do it?' , my answer is " i don't know man, it just came across my mind .
View 3 Replies View RelatedAutoDesk Smoke :: Getting Depth Of Field
Apr 27, 2011Getting a depth of field result in Smoke 2012. A tutorial on this would be really beneficial for a new comer like me.
View 9 Replies View RelatedAutoDesk Smoke :: Can't Scroll Through Clip
May 12, 2011All of a sudden, I'm unable to scroll through clips with real time feedback. Did I turn on some preference?
Also, I've noticed that when I'm in Action, I don't get realtime feedback going to the broadcast monitor, but rather the image catches up upon pen up. I don't see anything about it in the options in Action or global preferences.
AutoDesk Smoke :: Output Resolution Of The CFX
Dec 6, 2012When applying CFX to the clip it ignores resolution of the project and the time line and creates a resolution of the whole CFX based on clip.
In other words 1080 clip in 720 timeline creates CFX with 1080 out node, ( all action creates in 1080 swell) and only then send 1080 output to timeline where it applying resize soft effect. I know i can change resolution of action, but a can't change resolution of output node ( the las node that feeds output to timeline.) Is there an easy way to work around to feed lets say 720 to escape resizing in timeline.
AutoDesk Smoke :: Where Is ProRes Output
Jul 12, 2012I'm on 2012 SP3. I'm able to import and work with ProRes 422 just fine. But when I go to output and choose Quicktime, no ProRes options appear. Do I have to set this up somehow?
View 1 Replies View RelatedAutoDesk Smoke :: Right Click Menu On Pen
Dec 5, 2013I'm doing far too many inadvertent moves/deletes/copies, simply by clicking pen for menu to appear, only for it to commit to whatever the pen position was at. This happening in the library area is no fun at all....not sure what the answer is really! but it's not ideal....
View 9 Replies View RelatedAutoDesk Smoke :: Can't Access The Network
May 30, 2012I just want to import some media (and do a conform) via the network. I can see everything, but it won't connect. I also don't get any error messages. I already restarted all components and they all show a green status. I don't know what else to do....
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
AutoDesk Smoke :: Access Timeline Within CFX
Nov 3, 2012Is there a way to access the timeline within CFX ( much like in Flame ) ? I see the timing button but this doesn't seem to have the same control as a timeline for a specific clip.
Also, is there a way other then "explode one" or "explode all" to go within a CFX within a CFX ( pre comp ) ? i.e. a setup that is then put within the BG of action.