AutoDesk Smoke :: SFM 2012 - Relink Multiple Media Files At Once?
Sep 22, 2011Relink Multiple Media Files
Ok, so it seems that Smoke can only relink one file at a time.
Relink Multiple Media Files
Ok, so it seems that Smoke can only relink one file at a time.
How I can reload my media when it is updated on server. Imagine I conformed and few shots got graded and I have to reload them. I just look for a simple trick to reload my media and see the update version on my timeline.
Smoke 2013 Ext1
Mac OS X 10.7.5
2*2.4 Ghz Quad-Core Intel Xeon
14 GB RAM
Quadro 4000
AJA Kona 3
I get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
I did a project in SMK2013 in trial mode on an iMac. Mostly unmanaged media - links to ProRes Qts from Resolve. Sadly, I forgot to archive it before the 30 day trial expired.
I just installed 2013 on my main Mac Pro, and it's all licensed, and good to go - beware of a licensing issue with OS 10.8, by the way... (I'll write another post about that.)
I copied all of the linked source media to the new system, and using the MediaHub, I can see the projects on the iMac (even though I can't launch the app anymore), so my plan was to bring the sequences and rendered files over via Wire, then re-link to the ProRes source media on the licensed system. Easy, right?
I can copy the sequences over just fine, but in the conform tab - I can't get any of the Resolve files to relink. I've unlinked the shots, and set the file path straight to the prores media folder - the only thing different is the name of the drive it's linked to.
any column I choose to match - every file turns red. I've double checked the file names, the timecodes, etc... Everything matches up exactly, and yet it never finds a match, showing a conflict in every field I try to use as a match.
I thought i might have better luck if the media folder was imported into the project, and then manually set that folder a conform search location - but I crash every time i've tried that.
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
I unarchived a 2013 Linux sequence.
I took all of the clips an unlinked them in 2013 Mac.
I then gathered the source material on to a new USB portable drive. I then went through a conform and relinked all fo the clips that aren't in a CFX.
I can't see how to relink or get the clips inside the CFX show up.
I dragged the clips from the Sources folder, and collected them into a new folder in my Media Library.
If I collect those "checkerboard" clips into a new sequence and look at it via the Conform tab, it shows that the clips are Linked, as parts of them were also in the main timeline.
Check out the Premiumbeat Smoke Blog [URL]....
Is there a way to foce relink a clip when conforming an xml?
I have an xml based on 5d footage with no clip names that I need to relinked to graded dpx files. Using clip name and TC isn't working since the xml is looking for .mov etension. Using TC alone dosent work because each of the 5d clips start at :00.
I lost my mac os hard drive, but my data or clips are in other place, i have a backup folder of discreet folder from /usr/discreet,
i make a new install of snow leopard and smoke 2012, how to relink this projects without restore/archive method, i not archive any file from library menu, I have the discreet folder and metadata in raid disk.
Any time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies View RelatedI can't render anything and I know this has been addressed before, but I still don't see a solution, I have no Available Local Services under my Preferences/Backburner. We wan't to purchase smoke but can't trust that it will work on our system.
View 2 Replies View RelatedIs there a way to save a CFX set up with its media (in my case, still images) as a preset to be used in other projects?
View 9 Replies View RelatedAfter archiving out of 2012 SP3 and then un-unarchiving into 2012 SAP2 SP3, could i edit clips (with history)? For example, action-rendered clips, flame fx-rendered clips, etc.
2012 SAP2 SP3
10.6.7
Kona 3G driver 10.3.2
Quadro 4000 driver 256.01.00f03
Cuda driver 4.2.10
Mac Pro (mid 2010)
12 Cores / 24 Gigs
CalDigit HD Pro2 (8TB, 723 MB/sec read)
I have just tried plugging a Samsung SSD capable of 400+MB/s into a thunderbolt caddy. In action and on the desktop it behaves as normal. But in the player it plays at about 100fps. how to get it to play at speed.
The project config is HD 25 psf free. Smoke SAP2 SP2ssd_storageplaybackspeedissue.mov
[URL]
Working in Smoke 2013 pre-trial v3, and I've been wondering why every clip I import has the resize filter? Every video and graphic in the XML has a resize filter even though they are they same aspect ratio as the sequence. I've tried this with a NTSC and 1080i sequence and they've both had the same issues. I even imported a clip through the media hub and I had the same result. When I look at the clip in Final Cut, it is the same setting as the sequence so I don't have to render. In Smoke, I enter the resize editor and I don't see any resizing.
View 6 Replies View RelatedI've been trying to import a XML from FCP (xml version 2), bun everytime I only get a timeline with unlinked media...
I placed the XML one directory above my media. But when I drag the XML into my library (having Store Local Copy turned on), I only get the "empty" timeline...
When I try to relink my media from the gateway, it's not relinking anything (it says, no video and audio found). Is there no way to import an XML without having to import the original media into my library? Also, no matter what kind of clip I'm importing, it always soft imports my clips, although store local copy is turned on...
Attached is a picture with the settings for my xml import (and on top the unlinked xml, which says SOFT, although, as you can see on the bottom of the screen store local copy is enabled).
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
PR5. Up until this release, I haven't had a problem exporting quicktime movies. I have a 2:30 long video that I'm trying to export with no success, at best I'll get 30 seconds of my project. I'm not as familiar with Smoke setups and preferences
View 9 Replies View RelatedI got a clip imported with cache ON. So it's transcoded into stone and not linked to original file. When i check the file info, there's no path to original file, so i don't know where is the source path. I put that clip on timeline, and press 'pre-processing' button, i got error msg : 'cannot find the original media'. How can i fix this since the clip's info itself shows no track to the original file.
Actually, i know where the location of the original clip is. It's in one of my external drive, if i reconnect the drive then it will fix the error.
Trying to conform Canon C300 MXF media from 3 different drives. My source footage is spread across 3 TB of portable drives, so I'm trying to conform each drive's footage, cache the media, then move on to the next drive.
This mostly worked, but there's about a half dozen clips that refuse to cache for some reason. Everything looks fine when the drive is plugged in - then I consolidate handles, then go to the sequence and choose CACHE MEDIA - Backburner kicks in and says 100% complete.
But then I have to quit Smoke to eject the drives and connect a different one, and when I start Smoke again, MOST of the clips are there, but some of the clips are not. They do not say Unlinked or checkboards - but they are just black. (One time it showed RED frames - WTF??). If I reconnect the HD, the clips show up, so it's obviously still reading it from the portable drive.
Is there an option to force cache individual clips?.
I tried unlinking/relinking thos problem clips, and even Hard Committing the GAP layer above - and those few clips still do not cache - even the hard commit goes black when the drive is disconnected. How is that even possible? Do I need to add an Axis Effect to force a render, then commit those frames?
why the BB would say 100% complete, but not all clips are truly cached?
SmokeUser since 2012
MacPro w/ K3
32 GB RAM
CalDigit HdPro2 RAID
I'm having some difficulties in importing the material for the 2013 Smoke PR-2, when he gets care LINKED with the file, if I change the file folder on the desktop it disappears. How should I proceed?
View 9 Replies View RelatedI've been archiving then deleting projects out of Smoke. However, my media hard drive is not gaining available space.
Is there a safe way to purge any unused media?
This is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
Is there a button/preference I'm missing as this is integral to the workflow I use.
I was trying to find in the documentation a section about importing media and replacing media. I work at a VFX facility where we mostly work with EXR sequences and getting our footage as RED files.
So in an ideal world we would do the conform in Smoke and push out EXR files for the vfx/nuke/maya guys. And then be given back a EXR sequence with the timecode still intact.And in an ideal world, we would not get new EDL's from the offline facility in the middle of the project.
All of the above is a urban myth, the ideal world doesn't exist.And now for some questions from a not-so-ideal-world-situation.
1.) So how would you in Smoke2013 go about and compare EDL's so that you don't need to conform things that you already have?
2.) What if a clip is just 15 frames longer in the new EDL, would it be possible to extend a already existing clip?
3.) EXR's has lost their timecode, but we know with clip it is, how do we replace the clip? And would it be possible to "tag it" with a new timecode.
I wonder how many of you would love to have that back. Cant find a poll option here. So guess just reply. Not that its gonna change anything. But atleast we would know how many wish to see it as it used to be. May be AD might have second thoughts.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
Few times already, deleted one media storage in smoke setup and tried to ad another one, and it doesn't want to add. every time i reload it's empty. Only work around is to to uninstall Smoke and install again and then to add new volume.
View 3 Replies View RelatedI have a timeline made in Smoke and I'm wanting to only export a section of it. In other programs I would set an In and Out point and it would export just the range I've selected, but in Smoke.
View 2 Replies View RelatedI am trying to cache some exr files and for some reason Smoke can´t read the files:
Using the media hub I am able to view the exr file and can work with them as long as I don´t cache them. As soon as I cache them they are black and I get the message "unable to read media"
Is this some known bug? Backburner works perfectly (after tweaking some things with Mikes great tutorial), I can cache other files but not these exrs.
The Thumbnail in the media library are not useable. They need to be larger. I know the desktop is also an option, but for quick scanning, they don't serve there purpose.
View 3 Replies View Relatedi have done a new media storage on the smoke setup window, how do i delete it now?
View 4 Replies View RelatedHow do you share media and edit sequences between projects?
View 2 Replies View RelatedI am new to Smoke. It placed my media folder on the boot drive. How do I create one on an external drive and lose the other one?
View 3 Replies View RelatedWhen I have a CFX on a clip and I try to replace media (so I'm replacing the media under the CFX), it doesn't work. It overrights the CFX completely. Is this a bug or am I doing something wrong?
View 5 Replies View RelatedWith Autodesk Smoke v6 and existing Media Storage with few projects inside, I've recently reinstalled my Mac OSX 10.8.2 system. I had to procedure clean reinstall.While installing back Smoke v6, I asked to choose Storage folder. I checked the existing one.When I start a software, I can't see any of my old projects.Seems like Smoke doesn't see it. So, how should I restore Autodesk Media Storage with all my projects inside?
View 2 Replies View Related