Best way to divide a DWG file into sections? I`m trying to building a data base for construction work to build houses on a city, and the database call for a map that came from a gps device, that is on DWG format. now this image is full of squares that represent the new house locations, the problem is that is one whole image representing the whole city, I was wondering if there is a way to divide this image into sectors to represent the houses location when i do a printout.
How can I divide a line into equal segments in Illustrator? This is computer software, right? Shouldn't a computer be able to figure how to segment an arbitrary line? I tried turning the line into a sliced object and dividing that, but it didn't seem to work. Pathfinder only works on two or more objects.
We have to do a project in Revit The residential complex consists of 6 free standing buildings of a maximum height of 10 stories. Approximately 700 apartments.(50 different groups)The Office building is a 16 story high structure with a stepped silhouette GFA of the entire complex is 100 000 sq.m. We use Revit Architecture and Structure 2012. The project team is 12 people
How best to divide a file?
What will be the best allocation of project work?
What to avoid?
Some materials that describe how to work on such a project?
I have imported a .dxf file of a surfboard from another program as seen below. My plan is to create various cross sections of the board in order to cut out a wooden frame. It seems like it should be simple enough but I usually use pro/engineer for any 3d stuff and I have had no luck using the section plane feature on autocad so far.
I want to extract sampled sections to a text file like "Station,Offset,Elevation" by C#.net.Something like tplate output in land companion, which functions should I have access to do above?
I am completely new to the forum and to Autocad. I am using version 2011.
I am working with irregular solids and after I SECTION them, I would like to export to a text file the data points that make up the perimeter of the sections.
Ideally, I would like to do it from the command line, but that's a secondary goal, first of all I would like to know how to do it.
I am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
i want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important.
i want to divide a helix into number of segments...for this i used divide command..but its not working..what shall i do to divide the helix..no of segments or length of segment is not important..
Any command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need something that would be faster, use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and ther divide it on 4 or 3 parts.
Is it possible to divide a polyline into multiple segments with a certain interval?I am looking for something similar to "Measure" command.But I want to do this programmatically.
SendStringToExcute("measure ");
I need the point objects created by "measure' command in order to draw a new polyine with them.Of course, "SendStringToExcute" does not return such object collection.If you could provide me with C# (or .NET ObjectARX 2010) code snippet.
I need to divide thousands of lines into half, but AutoCAD divide command can only allow you to select one line at a time.Is there any way we can divide multiple lines at once.
When dividing, say, an arc into 4 equal parts. The point showing up on the object are so small, I can't see them! How can I change the tiny dot to a "x" or "=" or anything that I read?
My work requires me to create programs for our CNC router. It is done in AutoCAD 2008. To making programs faster I've created series of dynamic blocks. I am attaching a file with one of those blocks.
The file is actually illustrating what I need to do number of times a day. I would like to make the process even faster and more fool-proof. The "old way" in file shows what my current way of creating programs. The "new way" is my attempt to make it faster.
My problem is automatically dividing a line in dynamic block into a variable number of segments that are always equal. Naturally I use divide command after I stretch and explode my dynamic block. It would be much faster if the block would be able to do it all by itself.
My attempt of solving this was to use Visibility Parameter. However, if you look closely at it, you'll notice that if I want to do it for all the possible combinations it will be extremely complicated and easy to mess up. If only there was a way to have two visibility parameters. Then I'd make one for horizontal holes and another for vertical. Unfortunately I can't.
How to accomplish this? LISP, maybe? Unfortunately, I don't know LISP.
I need to divide a big region on lines intersections. imagine that you create a region around a chess table and break the region so you get each square as a new region.
I can't use array because the sub-regions aren't regular. I need this divided regions to export a DXF file to a Finite elements program.
For once I have to place many asymetric objects uniformly with Alignment along a convex circular arc (2D). So I try Measure or Divide using my Block but it flips my Block so it is aligned with the inside of the curve (closest to the curve centre) not the outside and the blocks are turned upside down. If I draw an arc concave up it plots OK. If I draw a Spline (single curve or reverse curve (S curve) in my desired orientation, it also plots OK.
I have tried all combinations of UCS but to no avail. The block is not dynamic so there has not been any Alignment set.
I have little Autolisp experience, what I need is a lisp routine that will divide a 3D Poly line to say about 1000 points and add index to the points from the start of the line to the end of the line. It is very important that the index be from the start to the end of the line, because we extract the info to excel and then use the x,y and z co-ordinate of the points on our hydraulic analysis program. We need to have the index and the x, y and z co-ordinates on our Excel sheet sorted by index and not by x, y and z.
To be more clear the 3D poly is a pipeline profile so we need to have the points in order by index and not by x, y and z.
do you know command or lisp that will do new pollyline between two polyline on 1/3 or 1/4 space between them.
I need sommething that would be faster,know is use measure on pollilines then i draw between horizontall polylines on verteks or point new pollyline and then divide it on 4 or 3 parts.
I need to divide irregular shapes into equal parts. For example, the attached shape needs to be divided into 10 equal parts. Parametres could be set such as all dividing lines are horizontal.
I need to do this in autocad (2013) if possible.
The closest discussion I found on this was at [URL] ......
I need a function that will allow me to do a "divide" with blocks but I need the single attribute to remain intact.
I need the blocks to align with object and keep the attribute. I did get it to work with constants but the function that I need to run next failed because of the constant. My variable is preset and locked.
I need to divide thousands of lines into half, but AutoCAD divide command can only allow you to select one line at a time.Is there any way we can divide multiple lines at once.
How to use the divide and measure command , and also I knew how to change the point style. But after I used the divide command to split my object into 5 parties. I can not click the point I created.
For a instance I have a 10 meters line and I used the divide command to divide it into 5 parties, and so I have 4 points. But if i want to draw some thing on the new point my mouse could not click it.
[URL].......
I cant do what the guy did in the video. when I move my mouse on those points I created I could not connect a line on the point like the guy did.
