My question (confusion) is about scaling. I know all drawings are suppose to be drawn 1:1 in model space. But what if I run into drawing that is not drawn 1:1? What should I do then?
For example if a drawing is done say 1/4"-1'0" how do I check it or how do I change it to 1/8"-1'0"
I am using auto cad '12 Architecture.
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am having some problems getting the hang of applying the drawing scale to my assignment. I understand the scale factor that is applicable to the printing only and that AutoCAD doesn't care about the units used...but something is not clicking here and I'm sure it is pretty simple. My assignment requires me to draw 3 simple structures at 1/8" scale on 11X17 paper. Each house is 20' long with 10' walls and each is done in absolute, relative, and polar. I actually completed the work with all 3 formats without specifying the scale or paper size, just to get familiar with the commands. But now that I am trying to set the dimensions correctly, I cannot replicate my work because I'm getting lost in the way things are defined. I am using AutoCAD 2005, also have a 2002 version to which I can defer.
View 9 Replies View Relatedthere's a bug in my file. but
system unit is set to 1cm.
display unit is set to 1mm.
I measure the geometry at the side. its about 6355mm
I put a dummy @ base where I measured it with the tape measure.
I move it up 6000mm and it goes way off.
I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedWhen I click the annotative scale icon at the bottom of screen it shows me the standard options to chose from:
(1/16"= 1'-0", 1/8"= 1'-0", 1/4"+ 1'-0" etc. etc..)
but it is permanently stuck in 1/4"=1-0"...
In other words if I select say 1"=1'-0"...and go to draw a dimension...the dimension is in 1/4"= 1'-0"....model space
when i am i the viewports and use the "scl" shortcut click zoom to scale nothing will happen i can zoom use anno. in the lower right corner or propties.
is there a buttom or a prompt that needs to be fixed.
I'm trying to plot a simple site plan to PDF through the DWG to PDF.pc3 option.
The scale in my model space is 1-1 and in my viewport in paper space 1-200.
The issue is I plot to PDF, and then the scale is way out. For example an object that should be 10,000mm long in model space appears as 59mm (11,800mm scaled) on the PDF. And of course when I print from the PDF to a printer this scale error carries over.
In 2000 I could set or change the scale for the drawing being created. I don't remember the path now, but the screen included text size, dimension line standoff, decimals or fractions, tolerances, etc. So far I have not found a way to set or change the scale of the drawing being created in LT2013. I discovered drawing properties but that's not it. Where such can be found?
View 2 Replies View RelatedI have a new layout i want to set scale for A3 and A1 paper so how can i set it,mean it should b clear print on A3 and A1 what is stranded scale type if i ll put 0.333 in custom scale what i need to write in title block.
View 3 Replies View RelatedI want to be able to use Autocad 2012 to draw the faceplate of a custom box that fits into a 19" rack. [URL] ........
The actual width of the box would be 17.75" and the height would be 3U in height 5.25".
I want to be able to print on Letter size paper in Portrait mode.
It looks like I should Engineering units though I am not sure whether the connectors and switches that will be on this faceplate will allow for decimal partial inches.
Based on those dimension should I use 1:3 drawing scale?
I get PDF's of A1 drawings all the time some hand drawn (Paper and pencil how primative lol) that I would like to add to but when I attach the pfd's I seem to have problems with the PDF drawing being blurred, If I zoom in on the PDF drawing in model space I can get it to become clear, but when in paper space it isnt clear even when it is scaled to the correct size of A1.
Is there a correct way of inserting the pdf in the first place ? (ie scale etc that I should be doing )
I have a problem in scaling. I wanted to know the scale of a drawing. After i have drawn the drawing. What will i do to know the scale of it or what is the recommended scale for the drawing i have drawn.
View 9 Replies View Relatedwhen i drag over a view onto the sheet and add a title marker the scale doesnt show up.... isnt it supposed to update this automatically?
View 4 Replies View RelatedI have this simple dynamic block that is to change from 4" to 6" to 8" square. I have a linear parameter, 0 grips, and a Lookup function for 4, 6 or 8. It is supposed to scale about the midpoint (insertion point). I have tried both the Midpoint and Startpoint settings for Base Location but it always seems to scale from the far left of the Linear Parameter.
using 2012 LT
just done a job for a client and when they get them printed they are not to scale (slightly smaller), i have checked my drawing and it is scaled correctly. i plot to a pdf and the client gets the pdf printed locally. when i print i print to extents and plot centred. i also sent a shopfit drawing from another company using the same method except their drawing was set to plot the layout, their drawing plotted correctly to scale so i am wondering now if plotting to extents is the cause of the problem?
View 8 Replies View RelatedCan I set a drawing scale? If I want to print 1:2, 2:1 and so on? If so how?
View 8 Replies View RelatedI am experiencing with an old drawing I am trying to open. The problem seems to lie in that there is a hidden scale factor being applied to the dimension.
I draw a line that is 1.27 long. When I dimension the line the resulting value is .635. I have double checked that my primary units are set to a scale factor of 1 and the problem still persists. Even more strange is that if I set the primary unit scale to 1.5 the resulting dimension value is correct at 1.905, with primary scale of 2 the dimension is 2.54, etc. I have used AutoCAD for many years and never run into this issue.I am dimensioning in the model space when this occurs and using AutoCAD LT 2012.
I have drawn a 2D 'ruler' 250 units by 50 units and drawn 10mm marks along the edge of the ruler with the last section divided into 1mm marks.
When I plot the drawing, setting the scale in the properties box to 1:1 or 1:2 (or whatever scale I choose) then selecting File, Plot etc, (leaving the scale in the 'Plot Scale' section of the dialog box as shown - normally 1:1) the resulting plot is slightly smaller than expected. What should be say 200mm is more like 199 mm.
I am using AutoCad 2007 and a local domestic type printer (HP type) connected via a USB line.
I have drawn a couple of small buildings. I'm using meters and plotting to A3. For some reason the in the layouts I have to put in a scale of 15:1 and 8:1 to see the building when I print.
I have looked at some other buildings that people have drawn, they are of a similar size in real terms. However they are plotting to 1:25.
How to plot my drawing in scale.. i always print in A3 and A4 size paper. i wanted to know how to do this.. ex.. 1:100 , 1:200, etc. 2nd:
Here is the scenario.: i have an forwarded drawing then i wanted to print/plot it in scale of 1:100 it is possible to do that?
I am using AutoCAD LT 2012. I am having a problem getting a drawing to be the proper scale and units. I pulled a drawing in and it has been drawn 1' = 1 unit. I really would like to get it so I can make 1 unit = 1". I need to preserve the current dimensions in the drawing.
View 5 Replies View RelatedI need determining the scale of a drawing I got from the internet in ratio form. the drawing itself has a little scale bar in the corner, however, since i do not know the measurements of the actual structure i have no reference point and therefore cannot figure out the scale in ratios.
I read on here that you can use general reference point such as the average dimensions of a door/window ceiling etc. but the drawing is a longitudinal section of a church, namely, Temppeliaukio kirkko, which has no 'standard' dimensions.
I need this drawing in 1:100
longitudinal section.jpg
Is there a way to find out if the drawing was in a scale other than 1:1 when it was originally drawn?
View 9 Replies View RelatedAny command that I could use to find the scale of a drawing. I am having to put some vendor drawings into company borders and I am having to do it by eye currently (which I really do not like doing). I am just curious if there is some way I can find out the scale of the existing vendor dwg so I can scale the border correctly and accurately.
View 9 Replies View RelatedCan i set my drawing in 1:160 metric scale..... because that one scale is not in CAD.........
View 9 Replies View RelatedHow do you Scale the drawing that i have in model space that's currently drawn in MM to INCHES?
I'm AutoCAD employee and i still have trouble with scaling. A
I have a .dwg drawing, and the same one but in .pdf file format. On the .pdf one, there stands the scale (1:500), but on .dwg one there is no scale. I was wondering, how could I determine the scale of the .dwg one?
View 9 Replies View RelatedHow to setup the scale of drawing.
Luckily, I found an CAD template that already have scaled text and dimension size setup. now, I have to set different scale in the model space according on which scale i wanna plot on view port.
but for annotative scale, what scale should i use in model space? Overall, I just want all my text to be in same size when print out and in a readable size.
I setup my paper in 22x34 but mostly print out in 11x17 paper for office use.
I have a problem when I am trying to plot auto-cad drawing. I have tried to set the scale in layout to 1/8" : 1' and I create a page set up and choose 24x36 paper size then when I try to print leaving the scale at the printer window to be 1:1 but when I press preview to see how the plot going to be, the drawing became very small at the lower left corner of the paper.
View 9 Replies View RelatedI have a client who is working on the edge of a MGA coordinate zone - as they are near the edge of the zone their scale factor is large and needs to be factored in to all setouts (it makes 50mm of difference over 100 metres.)
their previous solution has been to work day to day at 1 to 1 scale and then xreference this back into a MGA projection by using a scale factor around a single point false origin.
As they are moving away from this false origin - the scale factor is changing slightly.
Is it possible to create a user grid at 1 to 1 for the day to day use and then query this into a MGA drawing. via ADEQUERY to bring it back to MGA ?