I was just pdf-ing a whole load of layouts, when I noticed that the white box, shown in the screen shot, had appeared.
I have tried deleting it, but I cannot select it to get rid of it.All I can think of doing is deleting each layout and doing them all again.
I have checked the pdfs I generated, and it does not appear on any of them.
I just worked on a pic in gimp, went to save as, the file appeared just a white square, the pic did not come up.
I tried a few tricks to convert to jpeg, no luck. IT ONLY creates files Ive never heard of xcf, etc. is there no way to get a good jpeg file?
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
I would like to place a thin white border inside a photo..then I would like to erase a small portion of that border along the verticle side to put my name. I think there is a frame within PSE 11 that does this but I can not find it. I tried to add an example by going to insert photo but I don't think it worked.
View 9 Replies View Relatedmeasuring.jpg
there is no value, why?
Today I noticed 6 or 7 linetypes that have appeared in every drawing I open and cannot be deleted.
They include "Amzigzag" " Amconstr" "ACISOTGB" and others.
If I delete everytjing in my drawing and purge the linetypes are still there. They even appear if I load old drawings that din't have these linetypes initially.
Inventor 2013
I'm facing a problem that is when i'm doing view plot in AutoCad 2010, around my drawing there are few words : produced by an autodesk educational product .
This words come to 4 sides of my drawing which up,down,left and right. How to remove those words and make my drawing clear?
All my Photoshop 3D effect on the top bar are appeared to be grey cant be select, I have tried on the preference- 3D- select GL, but it is still not working.
View 20 Replies View RelatedReturning to Video Studio 10 after a period of disuse. All went fairly well until I managed to do something which resulted in a red line appearing in the timeline as per the pic below...
As a result, I can't view any part of the (as yet rather short) compiled video as hitting 'play' takes me straight to that red lined section (which is blank)...
I'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View RelatedPS crashed yesterday and now I have blue boxes all over the shop!
View 6 Replies View RelatedWhy would Lightroom give a sepia tone to anything I am working on? This only happens if I am using my AOC 27" monitor. The menus are still white, only the work gets the sepia added. Now the strainge part, if I switch to a different monitor, the problem goes away. I also use Photoshop and have no problem.
View 1 Replies View RelatedI have been working on redesigning a brochure based on a previous year. I updated all the images and text and sent it off to the printer the way it should look. When we got the brochure back, it had picked up an image that I never saw while working with the file. The printing company says the image was embedded in the file and appeared all along to them, but I cannot find any trace of it in my file. I have searched through every layer item by item to try and find it but it remains a mystery. I want to make sure that it does not appear in future prints of the file.
View 9 Replies View RelatedI was using lightroom3 today when all of the suddenly some of my pictures (far away from all) got like a coloured box on top of them.. I have attached a photo since it's a little hard to explain. notice that a very small part of all of the pictures is still as normal and the colour box seems to somewhat match the colours of the specific photos.. This is not a recently uploaded catalog and it has always worked fine. The weird thing is that even the original photos in My Documents look the same when previewed in the folder.. However- The exact photos look perfectly normal when opened with Microsoft's Picture Manager.
View 1 Replies View RelatedJust come back from a lengthy trip with about 900 photos from 3 different cameras. Did most of the jpeg's in LR 5, but waited with the Canon raw files for PS CC. All appeared to go well, with first adjusting them in PS CC camera raw, then opening some on PS CC. Saved most in PSD format. However, some of the less important ones, such as information photos, were saved as jpegs, from within PS CC.
This is where the trouble started. Once finished, I went through them all in Bridge, using full screen preview. The ones saved as jpeg, appeared tiny, instead of full screen. Trying to open them, resulted in an error message, with something about a marker not being there. Before panicking, changed the extension from jpeg to psd - and the filed opened in PS CC without any problems. Saved the files as jpeg, using a different name and this time they were all ok.
So it would appear that there is a problem saving a file with layers as a jpeg, without first saving it as psd
I am new to Photoshop (Elements Vers 10).
Today I have been working on a photo (cloning out the background) and after about 4hrs work a thin green line about 1-2 pixel thick, has appeared across the center of the page. How it got there but I can not remove it.
I have tried saving the project (as a photoshop file) and then opening it as a new project in an old version of Photoshop (Vers 3 ?) to see if I could clone out the line, but it will not permit me to clone it.
What the line is, what I did to cause it to appear and how do I get rid of it. I possibly could export the project as a JPG and start as a new project.
I have this strange situation.. i use the Arial font inside my cad drawings and when i print my paperspace layout, the text inside the viewport is a little bit more "bold" then the text i put directly on paper space.
Maybe it's a trick to know what text is placed where, but i want all this to be uniform, same thickness. Is there a system variable to correct that issue?
See the image below: It's a 400 DPI scan from an impression i did.
Up to COUPE C1 is the text inside the viewport, under COUPE C1is the paperspace text. Both are the same height... but difference tickness.
I really enjoy this new draw inside feature in Illustrator. But, I find that it does not always work. It seems to be grayed out sometimes. For example, I have drawn a shape with my Wacom tablet using a blush. I then converted it to a shape instead of keeping it a stroke by expanding it. But it will not allow me to now draw inside of it, even though it is a shape.
View 8 Replies View RelatedIn Recolor artwork is there a way to change the black and white colors to a color? When I try to edit them it doesn't edit them at all. It would be nice if I didn't have to manually tweak the colors to have color before I go into Recolor Artwork.
View 2 Replies View RelatedI have a really large sphere and have put a camera on the inside to see the inside surface. I have used the normal modifier to flip the normals and so have the skin on the inside. Something is going very wrong at this point because I have this ugly shadow line that I cannot get rid of and I also seem to not be able to light this interior, when I use an omni light it makes no difference. Where am I going wrong?
View 7 Replies View RelatedI would like to draw parts in 3d view which look very basic, i.e. out of a book.
Example:
white block with black lines so you can see it is 3d.background should also be white.
How do i set autocad (2012/2013) to do this. I would like the model space to be the same and not just for printing.
I am using a pdf underlay to trace over and whenever the crosshair or pickbox enters a white area it does not shift color to black to remain visible. This leaves me picking randomly trying to guess where the crosshair or pickbox is. If I change the 3dconfig to disable hardware acceleration, the color shifts, but the pdf is whited out. Not to mention the fact that by disabling hardware acceleration, I'm wasting the expensive video card on the machine. Is there a workaround? updated driver? service pack?
View 4 Replies View Relatedfollowing image shows up fine on WIndows machines, but on Macs it shows up as balck instead of navy, why? I have tried svaing in PDF, JPG, PNG, and PDF nwith Mac color profiles... what is going on? PS, the navy is #0d1125
View 3 Replies View RelatedI have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedIs there some kind of tweak I can do so that when I scan in full color, the white paper scans as white, not light blue or yellow?
View 6 Replies View RelatedOkay so I'm trying to take the white background off of a picture using the select a color on white, but it takes out a lot or the fur and eyes(it's a picture of a cartoon cat) How can I remove the areas of can from the selection without removing the pieces of cat too.
It's creative commons, so I guess I can post screen shots...
The cat is from [URL]...
A general idea of the selected area
What happens when I take out the selected area
So how can I take the pieces of the cat out of the selected area so when I try to delete the background I don't get an invisible cat?
I'm using PSE8. I was using Filter>Render>Clouds and it was working for me. I must have done something because the clouds that are rendered are black & white not Blue and white. My photo is of course a color image. How I can correct this or what I need to do to get back to the default setting that will render blue & white instead of black and white?
View 2 Replies View Relatedknow of a macro available that will search a document for any form of white fill (rgb, cmy,cmyk,greyscale, etc) and if it finds any of those colors, it will automatically change those white fills to a Pantone White Spot Color?
I'm aware on the Oberon Color Replacer, but I'd like a macro that is more simple and will do all of this with a click of a button or keyboard shortcut.
I need to change all of the pure white in a picture to a very slight offwhite, since a program I'm using interperates pure white as clear.
Is there any way to select all of a certain color in a selected region and turn it offwhite?
I created a logo and then opened it as a layer so that I can make a website header image. It is shown here [URL] and as you can see the background is an off-white colour. It is probably unnoticeable to many, but I would prefer to get it right. How can I make the background a pure white so that it blends in with the white of the wordpress theme?
View 3 Replies View RelatedI have a mac with Adobe Illustrator and I am just learning how to use this stuff. How to accomplish what you see below - white text that has shading/shadow and is on a white background?
View 8 Replies View Related