AutoCad :: PDF Xref Not Seen When Plot To DWF?
Apr 11, 2012I have a question, when i plot a drawing to dwf, the pdf underlay is not shown in the dwf file/drawing. The preview does. How come?
View 0 Replies
ADVERTISEMENT
AutoCAD Print / Plot :: Xref Not Printing In Hardcopy
Oct 13, 2011I’ve attached a dwf as an xref and set up a viewport, however when i print the viewport contents show up on screen, and in the PDF, but if i print it to the physical printer, nothing comes out except the lines i drew in that drawing (i.e. the polylines as references for where my viewport is).
I’ve come across this before in an older version of AutoCAD but have forgotten how to solve it.
Also, is it possible to bind a DWF? its seems you can do it with other things but not this file type.
[URL]........
AutoCAD Print / Plot :: Styles Not Applying To Xref'd Objects
May 13, 2013I currently have with my plotting. I've recently switched from using a color table plot style to named/layer plot style.
Drawing "TANK.dwg" contains 2d geometry inside a block named "2d-tank" and is on layer '0' in the block, and that block is on layer '0' inside "TANK.dwg"
TANK.dwg is xref'd into "PHASE 1.dwg" several times in several locations. "TANK.dwg" is on layer '0' in "PHASE 1.dwg"
"PHASE 1.dwg" is xref'd into "COMPOSITE.dwg" on layer 'P1'
In "COMPOSITE.dwg" I can change the layer color of layer "P1" and the block "2d-tank" changes color to suit. It derives it's display color based upon layer P1, as everything has been on layer '0' up until now. However, despite picking up the appropriate color, it does not inherit the appropriate plot style. I try to apply a screened/shaded plot style to it and it instead inherits the plot style of layer '0' in "COMPOSITE.dwg"
This is a problem for me as I have 3 phases, and I need to be able to plot them differently, depending on each phase shown. I'd rather see if there is a way to make my current model setup work before I go duplicating thing and restructuring all my drawings to suit a layer style inconsistently, but I need this to print right.
I don't understand why an object would inherit the color of the layer it's on, but not another layer property, specifically its plot style.
AutoCAD Print / Plot :: Black Box Appearing On Xref Image When Plotting?
Jan 10, 2014When I try to plot the file from the layout the middle and right part of my xref'ed image comes out as a black box - the top, bottom and left edge are fine. As are the line-drawings from two other xref on top of the image. The problem accourse both when I try to a physical copy on our plotter and when I try to plot to a pdf.
I'm working in autoCAD 2013 for mac and the files I'm working on are located on a server.
AutoCAD Architecture :: Plot Sheet Drawing - Xref Displays Incorrectly
Jul 8, 2013When I bring an xref drawing (floor plan) into a plot sheet drawing the xref does not display properly. Walls at doors are not removed and have jambs and door in what appears to be 'reflected screened' view. Switching to 'reflected' view, walls not removed, jambs and doors, and windows still showing.
I may have inadvertently changed some of the settings in the display manager, is there any way to restore the defaults here without reloading the program?
AutoCAD Architecture :: Xref Doesn't Plot From Sheetset But Does When Plotting Only One Sheet
Oct 31, 2013I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
AutoCad :: Plotting Drawing - XRef Shows Up In Preview But Doesn't Show Up On Plot
Jan 22, 2013I have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
AutoCad :: Plot Lines From Xref Are Small Tiny Points / Dots Instead Of Continuous Line
Oct 19, 2012I have a problem with plotting my layout. When I plot, the lines from the xref are small tiny points/dots instead of a continous line. All other lines are OK. What could be the problem?
View 7 Replies View RelatedAutoCAD Print / Plot :: Xref Title Block Will Not Print In Color Windows 7 64bit
Feb 3, 2012I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies View RelatedAutoCAD Print / Plot :: Change Plot Setup To Multiple Sheets For Use With Batch Plot
May 21, 2013I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
AutoCad :: Use Xref Manager To See Where Actual File For Xref Resides On Computer / Server
Nov 15, 2013I know that in ACAD you can use the xref manager to see where the actual file for the xref resides on your computer/server/etc. What I'm curious about is whether or not the inverse action is possible. Can you somehow access the file (not the output sheet where it's being xref-ed) and see what other files are using it as an xref?
I've come in on a project that is nearing completion and have been assigned the task of "cleaning up the project folder." Unfortunately, there are a ton of files in the different folders that are no longer in use on the final output sheets and I need to keep the ones still in use and archive the ones that are no longer needed. What I've been doing is going through those sheets and reviewing the xref manager for each sheet to see which files are actually put onto those sheets and making a physical checklist from which to organize my findings. Once the checklist is made, I then archive all the files that are no longer being used.
AutoCAD Visual LISP / AutoLISP :: Change Xref Layer With Xref Name?
Jul 31, 2009Is it possible to run a lisp which can extract all the xref names, make a layer with that name and then change the xref on the layer? I have got a similar routine from earlier posts but it doesn't work if any xrefs inserted in paper space (works fine on model space). could change this routine allowing to change the layer of xref in paper space too.
(defun dxf (i a) (cdr (assoc i a)))
(defun c:lxr ( )
(setq ss (ssget "x" '((0 . "INSERT"))))
[Code].....
AutoCAD Visual LISP / AutoLISP :: Xref Reactor Object ID To Xref Name
Oct 2, 2012I am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
AutoCad :: Bind Xref But Also Preserve Xref Links?
Sep 17, 2013when you bind an xref the link disappears from the xref manager.
is it possible to bind an xref, but preserve that link in the xref manager? i realize that will lead to two copies of the same object in the drawing (one xref, plus the new block). everyone's okay with that happening.
AutoCAD .NET :: How To Get Full Xref Path Name Instead Of Xref DWG
Jul 5, 2012How do I get the full Xref Path name instead of Xref.dwg? I'm scratching my head is this totally under my nose... cause I don't see where the property is stored. I'm getting EV_BDR.dwg instead of C:folderEV_BDR.dwg
View 8 Replies View RelatedAutoCAD Print / Plot :: Mac Doesn't Allow For Proper Printing On Their Plot Style Setting
Aug 29, 2013I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
AutoCAD Visual LISP / AutoLISP :: Plot Transparency Option In PLOT Dialog Box
Sep 11, 2012Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
AutoCAD 2010 :: Plot Thin Lines And Dots When Plot Transparency Option Is On
Feb 6, 2012I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
AutoCAD Print / Plot :: Sharing Plot Files 64bit With 32bit Machine?
Aug 21, 2012Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedAutoCAD Print / Plot :: Publish To DWFx Plot Stamp Layer
Aug 29, 2011When I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
AutoCAD Print / Plot :: 2007 Not Reading Plot Styles Correctly
Jan 17, 2012So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
AutoCAD Print / Plot :: Plot Results From Paperspace Are Different From Model Space?
Jan 17, 2013I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
AutoCAD Print / Plot :: Publish Vs Plot - Image Shifts And Border Cut Off
Aug 13, 2012I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
AutoCAD Print / Plot :: Poor Plot Quality With Aerial In 2012?
Aug 8, 2012I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedAutoCAD Civil 3D :: Station Ticks Display In Plot Preview But Do Not Plot
Nov 29, 2012I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
AutoCAD 2013 :: Get Batch Plot To Plot PDFs To Single File
Sep 30, 2013I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
AutoCAD Visual LISP / AutoLISP :: How To Add Cadfile Plot Date And Plot Time As Attribute
Aug 30, 2012I am aware of the plot stamp available in the Plot Dialog box, however, we are looking at ways to imbed this info in the dwg. I currently have the WD_TB with an attribute for FULLFILENAME, an attribute for PLOT DATE, and an attribute for PLOT TIME12. So I get the information on the dwg. I would like to be able to run all these attributes as a string. I have tried FULLFILENAME|PLOT DATE|PLOT TIME12 with spaces, commas, ( ), " ", etc. and I do not know the proper syntax to get this to work. I have also tried (getenv "FULLFILENAME") or the getvar, in the title descriptions box.
View 1 Replies View RelatedAutoCAD Print / Plot :: KIP 3100 With 2011 Heidi Driver Crashes Upon Plot Preview
Sep 1, 2011AutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
AutoCAD Print / Plot :: Cannot Choose Plotter In Plot Manager
Jun 25, 2013In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
AutoCAD Print / Plot :: DWG To PDF - Lines Plot As Gray Instead Of Black?
May 9, 2011Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
AutoCAD Print / Plot :: 2004 - Set To Plot To File / How To Change
Aug 14, 20122004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View Related