I recently cam across a block that had an attribute that showed the current drawing name, and if the drawing file name was changed the attribute value changed to match.
How this is done? I looked at the attribute properties and could not figure it out.
I'm trying to build a routine for my job to insert a block which consists of 3 single line variable attributes in a specific order. I need to be able to do this on many different drawings, and I would like to share this ability with my coworkers. Using the DesignCenter is not an option. In order to do this, I saved a drawing which consisted of the three attributes in the layout in which I need them to appear, however the order in which it prompts me to enter them is reversed. I already know how to set the order of attributes in an EXISTING block definition using the BATTMAN command, as every time I run the routine again, I'm redefining the block definition.
I'm not sure if it's important to know this, but the routine consists of a button with the following macro:
(command "-insert" "c:/folder/drawing.dwg" (getpoint "
Choose Insertion Point: ") (* (getvar "ltscale") 2) (* (getvar "ltscale") 2) "0");
EDIT: It works perfectly fine on my home computer, though my home computer runs an older version of acad.
I've a few points with some attributes (select point,properties and you see the different attributes of this point), one of those attributes is a textstring. It has a value (Dreumel). This textstring (value) is what i want to see and put in to the drawing. I want to display this value See the attachment.
View 1 Replies View RelatedI am adding a center aligned attribute to a drawing that is not open in the autocad editor. the alignment works if i call the function from the main thread like this.
[CommandMethod("center")]public void Add() { Do.AddAttribute(); }
But if the method is executed on another thread (which it is when handling a msmq message) then the attribute is added but the alignment doesn't display even though the property is set (and can be verified in the attribute editor).
private void OnReceiveCompleted(object sender, ReceiveCompletedEventArgs e) { Do.AddAttribute();}
How can i get the attribute alignment to work in another thread?
code is below:
public class Do { public static void AddAttribute() { var path = @"c:WAM444B4-002.dwg";
using (var database = new Database(false, true)) {
database.ReadDwgFile(path, FileShare.ReadWrite, false, password: "");
Transaction transaction = null; try {
[Code] ......
I am trying to add a set of attribute data to a block that already exists within a drawing.
View 1 Replies View RelatedI'm trying to automate an attribute extraction in the form of a table. I create the .dxe file but when I use this template file with -eattext (or -dataextraction), in a drawing different than the one the .dxe was created in, I still get the original table and not the one with the attribute values of the curent drawing.
View 4 Replies View RelatedI am looking for some code or something which can change the title block revisions from "01" to "02" in multiple drawings.
The title block revision block is set in attributes.
Is it possible to create a 'drawing scale' defined attribute inside my title block when brought into paper space? I tried setting it up using 'plotscale' fieldname with various formats and it keeps coming in as 1" = 1' or 1:1 rather than 1" = 20' because that's what my plot scale is inside paper space but my drawing scale is 20 scale. If I bring the title block in model space, it adjusts, but I don't plot from model space. Surely there's a way to make this automated inside paper space.
Also, I just setup a 'Date' attribute inside my title block today. What's the difference between Date, Saved Date and Plot Date? Will 'Date' update if its in a drawing and opened up a month from now and saved or do i need to take 'Date' out and replace with 'Saved Date' or Plot Date'?.
i have a for example a block with one attribute and would like add a new attribute. i´m trying to read the current block and redefine - it comes a new attribute in propertieswindow but not graphical.
(defun c:ent () (setq bn (getstring "
give a block name ")) (setq bez (getstring "
give a attribut name ")) (entmake (list (cons 0 "BLOCK")(list 10 0 0 0)(cons 2 bn)(cons 70 2))) (setq fe (entmakex (list (cons 0 "CIRCLE") (cons 8 "0") (cons 10 '(0 0 0)) (cons 40 1)))) (entmake (list (cons 0 "ATTDEF") (cons 8 "0") (cons 10 '(0 0 0)) (cons 11 '(0 0 0)) (cons 40 1) (cons 1 bez) (cons 3 "TOP") (cons 2 "NAME") (cons 70 0) (cons 73 0) (cons 50 0) (cons 41 1) (cons 51 0) (cons 7 "STANDARD") (cons 71 0) (cons 72 0) (cons 210 (list 0 0 1)) (cons 74 0) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0 "ENDBLK")(cons 8 "0"))) (entdel fe) (entmake (list (cons 0 "INSERT")(cons 2 bn)(cons 10 '(0 0 0))(cons 66 1) (cons 62 256) (cons 39 0) (cons 6 "BYLAYER"))) (entmake (list (cons 0
[code]....
We have generic drawings of assemblies we use in layout drawings as standard details. We insert them as blocks with one or two dimensions that vary (geometry remains the same-these are just representative for information).
We could define these as attribute values so that a user types a length that displays in the drawing but if we wish this to be part of a dimension we would have to explode the dimension to manually replace the mtext dim value with an attribute tag.
This seems unsubtle so I edited the dim value to be a field referencing the attribute value and made the tag invisible. This worked in the drawing-the attached shows the attribute tag ALL THREAD and the resultant dimension text (as a field value) replaced with the default value LENGTH.
When the drawing is inserted as a block it duly prompts for a value for ALLTHREAD and any value can be typed-`1200, 3500, 1672 etc. but the dimension does not update from the default value LENGTH, even after using attsync, regenall. So, if the drawing recognizes the attribute then how come it cant recognize the graphic via a field reference and update it? Is it buried too deep in the database hierarchy for LT to make sense of it maybe?
I dont want to explode the dim but it looks like I may have too if this cannot be made to work.
I know how to create a block and all that is fine, but looking for detailed simple lesson on how to create a Attribute. ( I guess thats what they are called). For instance, drawing a floor plan with different room names and etc, I know there is a way to make a circle or polygon, or square and then when it is inserted in the drawing, you just have to type the new name of the room, or the window symbol, or door number and etc.
By the way, I am using a student version of AutoCAD 2010. Also, if you could also add the keyboard shortcut alias's too would be a great deal.
how to change the font of a specific attribute in all my blocks in a drawing. I am trying to change the INST attribute font to Arial but I have thousands of them through out my project. My other attributes that I do not want to change are using the same Style as this block so I can not simply change the style.
View 9 Replies View RelatedI've got hundreds of files to convert.
In VBA, how can I batch convert field attributes in blocks to text attributes while retaining the blocks? Is there a simple way to univerally convert them all at onceusing VBA? The plotted values for the fields must be retained, too.
Explode will not retain the value of the field.
Burst will not work as it explodes the blocks as well.
You can right-click on the field and slelct "Convert to text" from the RCM. So I know that the process exists within CAD, just need to batch the process for a quantity of DWGs at a time - in VBA.
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
Background: Someone exploded an attribute block and copied it hundreds of times throughout a project, each time changing the Attribute Tag to match the Value they expected to appear in their drawing. The drawing must be xrefed, so the attribute definitions do not appear.
(There is only 1 attribute in the block.)
Proposed Solutions:
1:AutoLISP routine which copies Tag data from Attribute Definition into Value of Attribute Block:
Prompt-Select Attribute Definition
Copy Tag data
Prompt-Select Attribute Block
Paste data into Value
(Allow repeat to speed workflow)(*PREFERRED*)
2:AutoLISP routine which copies Tag data from Attribute Definition into Default Value and creates a new Block:
Prompt-Select Attribute Definition
Copy Tag data
Paste data into Default Value
Create New Block
(Select Multiple Objects)(Creates tons of new blocks which are messy)
I am using M Text Attributes to store imperial lengths in the drawing, feet inches and fractions (stacked). When I read back the Text String property which, is the M text Attribute.Contents parsed, I am having problems because the parser does not add a space between the inch and the fraction. So, is there any setting that could be used to tell the parser to add the space between the inch and the fraction?
View 1 Replies View Relatedcreating a block with attributes. I did manage to get my block set up and inserted in a dwg, but I am unable to change the "value" of any attribute. Unless I click on the "..." button next to the value field.
View 1 Replies View RelatedWhat I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies View RelatedIs it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
I want to copy attribute values. I'm making a catalogue of all the reinforcements in my drawing so I need to name those reinforcements. So what I want is to make a string of text that I don't need to totally modify everytime. Something like this:
Amount of reinforcement bars - 5
Diameter of the reinforcement - 12
Division of reinforcing bars - 100
Reinforcement bars: 5-T12-k100
So the only attributes I'd edit would be the first three not the last one. So how can this be accomplished?
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
I am trying to use the tag object in the tool pallate. How do you add a attribute quickly. Block editor. It only has one attribute i need the tag to show detail/sheet.
View 1 Replies View RelatedHow I would be able to grab the block constant attribute by searching via tag.
e.g. block has a constant attribute 'Color' with value of 'red' and I wish to attain 'red'
I am currently obtaining non constant attributes using:
Dim attRef As AttributeReference = DirectCast(tr.GetObject(attId, OpenMode.ForRead), AttributeReference)
and grabbing the '.textstring' when looking at the '.tag'
How do I go about this with similar logic but pointing to constant attributes? I have tried searching thoroughly and almost all results for me were in VBA.
Do we have any way to sum attribute value (integer) of many blocks fast?
View 8 Replies View RelatedIs it possible to have a rectangle, around a single attribute, change it's with as the attribute changes in width?
View 1 Replies View RelatedAny short cut to update the fields in the attribute without double clicking on the block attribute to change.
I'm looking for something to write in the command line.
I need to open a drawing and read the block attributes and find a block with name "ABC" and attribute named "Text" in "ABC" block. for which i am using the below code which is working perfectly.
Try AcadApp = GetObject(, "AutoCAD.Application") Catch ex As Exception AcadApp = CreateObject("AutoCAD.Application") End Try AcadApp.Visible = True Try AcadDoc = AcadApp.Documents.Open(DWGName, True) RichTextBox1.AppendText(" - Opened File Successfully" & vbCrLf) Me.Refresh() Catch ex As Exception RichTextBox1.AppendText(" - Can not Open this Drawing" & vbCrLf) Me.Refresh() Exit Function End Try Dim Obj As Object For Each Obj In AcadDoc.ModelSpace If Obj.ObjectName = "AcDbBlockReference" Then RibbonLabel1.Text = "Find Block: " & Obj.Name Me.Refresh() ' Check for attributes. If Obj.HasAttributes Then Dim AttList As Object Me.Refresh() If Obj.Name.ToString.ToLower = "abc" Then ' Build a list of attributes for the current block. AttList = Obj.GetAttributes ' Cycle throught the list of attributes. For _i = LBound(AttList) To UBound(AttList) ' Check for the correct attribute tag. If AttList(_i).TagString = "Text" Then return AttList(_i).TextString.ToString End If Me.Refresh() End If Next End If End If End If Next Obj
But i want to know whether is there any way to get the block named "ABC" directly without looping through all the objects.
I have a survey plan with a ton of blocks in it.
The blocks have the elevations in the attributes, but i want the elevation in geometry position z.
I have a block content many attribute. When I'm create the block whit this many attribute, the order of this attribute is not properly. I know autocad have a command to class this many attribute in order but i search it and i don't know where is it.
View 1 Replies View RelatedI tried to bring in a shapefile to AutoCad Map 3D 2013 and I realized the attributes in the table were incorrect. There should be no negatives for the column CLN_NUM_ID.
And it appeared that the CLN_NUM_ID is totally incorrect. Then I realized the data type of CLN_NUM_ID is Long integer so I changed the datatype to DOUBLE in ArcMap. When I brought in the shape file, the program crashed.
I need to get the Attribute Collection of a named block which is not been placed in the drawing, but it does exist
Dim paaltype As String
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
Dim acDocEd As Editor = acDoc.Editor
Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()
paaltype = "paal01"
Dim acBlkTbl As BlockTable
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead)
If acBlkTbl.Has(paaltype) Then
‘block exist, how to get the attributecollection
End If
acTrans.Dispose()
End Using