I am running ACAD Architecture 2011, and would like to set up a recurring automatic Sheet Set Archive to back up my project once a week, while i'm not at my desk, i.e after hours.
I'd like for it to run the command _ARCHIVE at periodic (weekly) intervals, and automatically name and place the generated .zip file in the network location i designate... Is it possible?
In ACA 2012 there was a nice feature that did the following:
When you finished creating a new Sheet Set in the SSM, it would then immediately open the new Sheet Set in the SSM. (a few seats of ACA 2012 were in use in the office) In ACA2011, it didn't do this. You had to browse for the newly created .dst file to open it. (I was using ACA 2011 at the same time as those others were using ACA 2012).
Now we've all upgraded to ACA 2013 in the office. However, that nice little feature appears to be gone again. Any way to turn that back on in ACA 2013?
under options - I have the Automatic save unchecked
the program keeps saving after I do something in sheet set manager...like rename a sheet view
2013 Civil 3D
i made a sheet metal part.ipt but that file is not updating immediately, i have added
iLogicVb.UpdateWhenDone = True
InventorVb.DocumentUpdate()
also tick marked in parameters for IMMEDIATe update
I have several projects that have some very big complex assembly files which are taking up a lot of space on our company drive. I need to compress and archive these large files to free up space on the drive. I know that shrinkwrap is an option to simplify assembly files, any optimum way of compressing large assembly files and reducing the file size considerably ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have hundreds of photographs to print ranging from 2x3" up to 8x10" and I want to print them all off on a 44" roll and cut them out individually.
All I want to do is point Photoshop to the folder and have it arrange the images in the most efficient configuration for printing automatically, allowing me to set the color management on the document and the dpi of the 44" wide picture before I print it.
I've been re-downloading my old Mini DV tapes. I have close to 30 of them so that's a considerable amount of data. I would like to do a reasonable (up for discussion of course) compression of the DV files before sticking them on my NAS box for all eternity (mirrored storage and backed up off-site).
I tried to use the batch conversion tool with several codecs and it generally works but I can't find a combination of codec and settings that leaves the video at the original 720x480 resolution and aspect ratio. When I pick, say, mp4 or m2t formats and 480p resolution I get 720x480 video but there are letterbox bars on the left and right. I do select the 4:3 aspect ratio.
What are the right settings for this task? I can figure out the right compromise for bitrate but I want 720x480 native resolution, no scaling. If I shouldn't use this tool for the job but something else
I have a folder of clips that I'd like to unrender then archive so that I just end up archiving the metadata. I can't find a way to do this in Smoke 2013. When I choose archive links only the archive seems to be massive so my guess is it is still archiving rendered shots.
View 5 Replies View RelatedAfter creating a new catalog for photos from a collection, I'd want to remove the photos from Lightroom and keep on disk. In the collection, there are some photos that are in multiple other collections and I'd want to keep those images in their other collections and so not removed them from Lightroom.
how to easily identify those images that are in other collections and thus might not want to remove those images from Lightroom.
Is it possible to archive setups without archiving the whole project?
View 5 Replies View Relateddoes archiving enables us to directly import a timeline without having its clips loaded in the system (like fcp and other NLEs) ?
View 2 Replies View RelatedI have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedI was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
Is there a way to include custom sheet properties in the sheet list table?
AutoCAD Civil 3D 2012 (Primary),
Dell Percision T3500: MS Windows 7 64-bit SP1;
Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
I have an older drawing with an outdated sheet format. I'm wanting to update to a new custom sheet format without having to redimension and recreate views. Is it possible to just update the sheet format?
View 1 Replies View RelatedI am having a problem opening older sheet sets from AutoCAD 2014.
I can select the .dst file, but when it "opens" I onlly have the icon in the seet set manager and nothing else, it is entirely blank.
I made a new sheet set, but now older versions of AutoCAD cannot read that one.
A collegue asked me about this as he has been given a part to model and the details are for the flat sheet not the finished model. Is this possible in 'sheet metal'? I had a quick play but couldn't work it out. Im used to creating the finished part and 'un-folding' to get the flat pattern.Detail supplied below.
View 4 Replies View RelatedI am not able to open Sheet list in Sheet Set Manager.......
View 3 Replies View RelatedI have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
I have a dwg file with three sheets in, just default names, I can access sheets 2 and 3 but get the attached errors when trying to access sheet 1 form either sheet 2 or 3
This file was originally created in IV2009 I've had no problems then or with the various conversions of it.
It seems to be memory related so here's the sitrep as for memory 8GB DDR2 RAM, and Virtual Memory set at min of 8192MB and a Max of 16384MB, I did have it set a systems managed but that gave a warning of low virtual memory with almost every drawing file that I opened.
I am using AutoCAD 2013 and I working on a project of approxamitely 80 pages and I have a Sheet Set Manager set up.There are about 40 pages that have text saying Continuation on Sheet XX of YY. I managed to use a field for the total count (YY) however I need to link the XX to the another drawing. I have researched and failed miserably.
View 9 Replies View RelatedI'm trying to set up a title block template that will be used between several different sheet sets. I have entered the custom properties, then when I go to the title block and try to insert the fields with current sheet set custom the drop down box is empty and then when I try to type in the custom property name the link still does not function. Is there some trick that I'm missing, or is this function broken on AutoCad 2013?
View 6 Replies View RelatedI am using Inventor 2010 (I know this is my first problem, but you have to use what you're given!) and I need to use the sheet number in a calculation that will display the result in a text box. =((<SHEET NUMBER>-1)8)=1 displays a result of ((11-1)8)+1. I suspect that the sheet number is being brought in as text instead of a number. I tried adding atoi to the equation to convert the sheet number to an integer, but it did not work.Is there an alternate source for the sheet number that will return a number? Is my syntax wrong?
View 1 Replies View RelatedHow people deal with multiple revisions of one sheet with sheet set manager, basically I want the cover sheet of drawings to have a list of drawings including the revision letter and revision date and on each individual sheet keep track of historical revisions
There is the current sheet revision and date fields.Does everyone usually just update these and manually keep track of historical revisions else where in there title block?
I'm fairly new to Autocad and getting used to using sheet set manager. What I'm experiencing is, when you insert a model view it brings in an xref of that model, but i'm then unsure how to add additional xref models into the same view.
For example I have a separate ground floor plan file and OS data file which I want to show in the one sheet view without nesting the OS data to the original ground floor file.
When I publish my sheet to PDF, dimensions of my sheet is broken.
View 9 Replies View RelatedI have over a 100pg plan set and have changed page numbers and added more drawings and deleted a few. so now we have to go through the entire Table of Contents and drawings and renumber everything. Is there a way to link the fields in the Table of Contents with the page numbers on the drawings?
View 2 Replies View RelatedI was creating a new sheet set in the sheet set manager as I have created new drawings to be added to the old one. When I do this and browse to the directory of drawings, once I hit next it only wants to create a sheet with a few drawings in the directory. There are 22 drawings in the directory and is leaving out about 18 when it creates the sheet set.
View 2 Replies View RelatedI am trying to create a sheet set with sheet set properties for title blocks but every time I close sheet set manage I lose the properties I typed in .
View 1 Replies View RelatedI am using the Sheet Set options to creat my Sheet Index. It imports everything just fine. My issue is when I want to create a space between sections the option to add a row is greyed out. For ex I would like my sheet index to look similer to the following
S1.01
S1.11
S1.41
S2.01
S2.03
S3.01
ETC.
Is there a way to do this using the sheet index option in Sheet Set manager?