AutoCad 2D :: Annotative Mtext Disappearing In Model Space
Jun 25, 2012
My annotative mtext is invisible in model space? Completely visible and correct when viewed from paperspace via a viewport, but nothing in model space. It is there! i can window select it in model space and see it.... ?
I read that copying into a new drawaing will fix this. And it did! But now, it is gone again? Not sure what command or action i took to do this but i haven't done anything out of the ordinary?
It is annotative mtext, my non-annotative mtext is still there but it is also masked.
Using acad 10 I just start using annotative styles now, so far in order to detail a part I use to actually copy the geometry, change styles and scale and start detailing.
The problem is that often when Im detailing and annotating a part I need it to be clipped.
Is there any way to tell autocad that in scale 1:25 I don’t want to see all the structure but only a specific area of it(clipped inside a rectangle)
I have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
I have a drawing I am working on regardless of whether I use DVIEW Twist or UCS rotate I encounter the same issue. I start with MTEXT that is parallel to my intended view. However, as soon as I make it annotative and set it to Match Layout the text rotates 90-degrees and is no longer plan readable.The text lives in model space, not paper space. I've even roated the layout viewports in this specific drawing to match, and the text appears correct when viewed through a viewport, but when I jump back to model it is turned on end 90-degrees again! Have I missed a setting somewhere? Shouldnt the text reamin oriented with current view in model space?
I am uploading a link to a video which shows this problem in detail. URL...
I am using 2010 and when I am on my sheet or viewing my database through a viewport annotative objects tend to disappear and it happens randomly. It's only a few objects that will disappear while others are shown.
Example: My grid bubbles may disappear, but leaders, text, dimensions, etc are visible.
Another example is door or window tags may disappear while grid, leaders, etc are all shown and when they don't show up they also don't print. Reloading the xref doesn't bring them back also. I have to physically go into the database and make some kind of change (erase a line and than undo; draw a line and than delete it; change a scale, anything); save the drawing and then go to my sheet and reload the xref to get them to come back.
I have been able to turn on the annotation for the Mtext, which applies the current annotative scale, but how do I add additional scales to the Mtext object.
After closing and re-opening my drawing, my annotative mtext is moving, and shrinking. When I click on the text, the properties say annotative is set to NO. I reset it to YES and fix it, but once I close it and re-open its screwed up again, and annotation is set back to NO.
I am trying to create a Mtext object with an annotative TextStyle. I make the textstyle current (which I don't know if is exactly the same as changing the TextStyleId of the mtext object) and create the MText. The problem which I encounter is that the newly crated MText Object has textheight as the textstyle's paper space text height, instead of scaling the text height by the annotative scale, as when you create the Mtext using Autocad menu.
I have annotative mtext that keeps changing width and location. See pic. When gripped, they're in the correct location but wrong scale. I experienced this on a few drawings with C3d 2010 and now 2011.
I just loaded AutoCAD 2012 on Friday and have noticed that when I use annotative text or mtext in paper space when printing or previewing the text it rotates 90 degrees to vertical, but is horizontal in the drawing. Only does this with annotative text or mtext, non annotative text and mtext remains horizontal when previewing or printing.
When preparing surveys i often use the annotative labels and tables available in Civil 3d. I am familiar with modifying label & table styles, but i have not yet been able to figure out how i can add a column to my table that contains fillable text. Because of that i am forced to create a table and then add text in paper space adjacent to or over the top of it.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
