I just installed the just released Visual Studio 2013 Professional x86 in a Windows 7 X64 with AutoCAD 2014 X64 computer hopping to check the Edit and Continue feature as advertised in [URL]
View 5 RepliesI develop AutoCAD using .NET, I use the Edit and Continue feature in Visual Studio 2008 while debugging and testing what I wrote. I recently got a new machine and now my Edit and Continue doesn't seem to work anymore.
View 9 Replies View RelatedI think that something is not the way it is suppose to be at my ribbon I have a Inventor Studio icon but by defaults is not active (it's grayed out) so in order to turn it on I have to go to add ins and turn Inventor Studio off and than on again and in that way I am able to activate the Inventor Studio button but after that all the buttons in the Rendering Studio tab are inactive so I cannot use them. And I cannot figure out where is the problem. Is it because I am using the student version of the software and it has some kind of limitations on the rendering engine, or it is some kind of malfunctioning of my installation. Everything else is working normally I can modell I can do a rey tracing viewport renders but I cannot run the studio environment interface.
View 5 Replies View RelatedI'm trying to create a scene in IV Studio using point lights. If I want to change the position of the light's target, IV won't let me.
The option is simply not available. Not in the dialog (see attached image) an not in the graphics region (clicking the glyph's).
According to the help text, it should be possible (see attached image). The problem persist in both normal lighting styles as in local lights.
i have installed the SDK for inventor 2014, but there is no add in template for Visual studio?
can i get one from anywhere?
I am having Visual Studio 2008 installed on my computer and AutoCAD 2008 as well. When i downloaded the ObjArx from AutoDesk and try to install ARX Wizards it says that you must have Visual Studio 2005 installed on the system.how to get the ARX wizards for Visual Studio 2008 ?
View 2 Replies View Relatedwizard installation error on visual studio 2010
View 1 Replies View RelatedI have a project related to connect autocad and visual studio(VB.Net). Example: I open my file autocad and then use command type call run visual studio.
View 3 Replies View RelatedI want to know if it's possible to replace a drive by an environment variable in a search path in the profile. For example:
to replace C:Program FilesAutodeskAutoCAD Mechanical 2012Acadm by %LOCAL DRIVE%Program FilesAutodeskAutoCAD Mechanical 2012Acadm.
Dev env: AutoCAD 2012, VS 2010, ObjectARX.Net 2012
A simple windows form command dll to test within the VS2012 + AutoCAD 2012
Bug: when debugging with VS2012, the first command runs fine and I can debug it with breakpoints etc etc. However, after the first debugging session, if I try "File"->"Open" or "New", file dialog will popup and then my AutoCAD 2012 crashs.
It won't happen if I compiled the dll, and load directly from AutoCAD independantly running instance.
I'm looking for the complete instruction set prepare Visual Basic Studio 2010 Express to program Inventor 2012 Professional.
At the moment, all I've done is to install VB Studio Basic 2010. If I'm not mistaken, don't I have to "configure" VB 2010 Express so it can be used with Inventor 2012?
I made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
I received a set of files from a client with .max extensions. Is it possible to open or import these into AutoCad? I would like to try this before going back to the client and asking for them in a different format.
View 9 Replies View RelatedAfter looking at this one guys visual studio 2005 wallpaper I wanted to learn how he did it. I am trying to duplicate the small squares you see on his wallpaper. how he did the shapes in the wallpaper.
View 1 Replies View RelatedOften I'll render a preview of my work in Studio and want to change the timelines of 30 or 40 different parts. Each part can have 5 or 10 snippets of timeline (the blue lines in "Animation Timeline"), so I end up holding down CTRL to select the timelines I want to delete (easier to start from scratch than sort through a mess of timelines) and I end up clicking through 200 or 300 blue lines to delete them.
Is there an easier way to clear timelines for parts? I don't want to clear all the timelines for a particular part, just up to a certain point. For example, in a 30 second video, I might want to change the speed of the parts at the 10 second mark, so I just delete everything from 0:10 to 0:30.
Attached is a picture of the blue timelines I'm talking about. Not sure what else to call them.
In the Inventor 2012 drawing environment when multiple objects were present I would pause the curser and use the wheel on the mouse to select the object and click the green check mark to dimension a part.
In Inventor 2013 the objects will scroll using the wheel but the green check mark don't show up. How can I select the correct object I want to dimension to?Has the behavior of the select other function changed in Invnetor 2013 or is this a bug?
I'm dimensioning to a mid point of a line that has a center line over it.
I have an issue trying to connect to Live Maps. How to implement this through a proxied enterprise environemnt. I've read the posts to use :
Authenticated Proxies:
To use the above mentioned AutoCAD Online components through proxy servers with Authentication enabled, you should enable http (port 80) and https (port 443) access to the following domains in the proxy without Proxy Authentication (i.e. Access for “All users” or Anonymous access through the proxy):
*.autodesk.com
*.google-analytics.com
*.cloudfront.net
We don’t proxy ports 80 and 443 directly (we use 8989-9093 for proxy ports), so I don’t see any way of meeting these requirements at the present time, at least in the wired Enterprise network.
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
I have a block named "WD_MLRH". There are 3 specific attributes which I want to change in it. The attribute names are.
RUNGCNT, RUNGDIST and RUNGFIRST.
RUNGCNT will = 20
RUNGDIST will = 1.0 (or 1 will suffice)
RUNGFIRST will be decided by a user input.
Something along the lines of...
(setq RUNGFIRST (getint "Enter first rung number: "))
I'm sure this is completely wrong, but i hope that portray what I'm trying to accomplish.
I want to edit 1 attribute value in a block to number all my blocks (eg A001, A002, A003...) (example picture attached)
I know about the at tout and at tin but I need a lsp routine that only changes one attribute value without having to double click and go through that.
i attached a lsp routine, how to edit and remove everything except the value part.
I need to edit a text in my dwg using a script.
How I do it?
I've started a new job and inherited a lot of custom files and menu's without documentation.
The company CUI is setup as the enterprise menu and displays READ ONLY on my system. And the company palettes all have a padlock displayed. All relevant files are on the server.
WHat rights do I need to edit and update these files?
I'm having issues with updating an MTEXT attributes value using lisp.
If I insert my block (this is a titleblock) and run my lisp routine the MTEXT attribute updates fine. Once I edit the MTEXT attribute with the MTEXT editor, and then run my lisp routine again, the MTEXT attribute will not update anymore. All the single line (DTEXT) attributes update fine. The lisp routine I created has worked for years...this is the first time I've tried it with an MTEXT attribute.
We have had custom toolbars for many years that included custom pop menus etc. Now that we are running cuix customizations how do I edit these customized pop menus? Do I need to rewrite this stuff in lisp, vba, .net, whatever?
View 1 Replies View Relatedwhether within AutoCAD or thru Autolisp or VBA, to individually edit text that has been grouped. Ungrouping and regrouping is too cumbersome. Search and replace will work, but will change all instances of text that match the search / replace criteria.
View 3 Replies View RelatedI have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies View RelatedI'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View RelatedIf LISP can be used to edit a diesel expression in a field inserted in dtext? I need to adjust the last number in $(+, $(GETVAR, USERI2),1) .
View 4 Replies View RelatedAny way to customize the double-click of a block attribute to run the _ATTIPEDIT command on the targeted attribute? I know this can be achieved by holding Ctrl & then double clicking, but I am often using my hand else where on the keyboard, or even more often, when entering many values into attributes, I am using my left hand to keep my place on a sheet of paper as I scroll down it and enter in the values.
View 5 Replies View RelatedI need to be able to batch process a bunch of title block attributes automatically.
Block Name: Title Block
Tag Name: SH
Currently they come out with just the number 1, 2 , 3 etc I need to add a leading zero ie 01, 02, 03 etc
All the scripts I have will just replace the number with another
I just want to append the zero infront of the existing number
ie the code will need to read the existing number and decide if its less than 10. if it is less than 10, then the code just needs to append the leading 0. if its 10 or over, then do nothing.
I've been up and down the forums looking for some direction or programming code for this to no avail.
What I'd like to do is edit a table where the cells are populated with fields. I'd like to copy the last row of the table to a new row (fields and all), then change the fields of the row I copied FROM to text, and lock those cells.
I'd like to copy this row including the fields to a new row beneath it. Then edit the cells of the first row to change the fields to text, and then finally lock the cells of the first row so that only the new row would update when the field properties change. Eventually they will be populated with data from the Vault..