Is it possible to create a "relative" connection to databases and SHP files in Map 3D, similar to the ability to create a relative external reference to a Civil 3D drawing file?
View 3 RepliesI copied some Survey Data of AutoCAD Civil 3D 2013 for Surveyors to my C3D 2013 machine few weeks ago. Now I cannot do the "Import point file" of the Survey2 Data B in Survey Databases, because the Survey2 Data B is locked up - see the attached file that has a red circle with an arrow on. How I can unlocked the locked Survey 2 Data in the Survey Databases.
View 1 Replies View RelatedAre there any good tutorials on reading/parsing text files and databases out there? I've been looking around, but I can't really find anything.
View 12 Replies View RelatedI recently switched from a Windows PC with ACDSee, to a Mac system with Elements 11. I am currently moving files aboout on three different drives and have found that I have to constantly go back manually and search out files to re-establish connections. THis gets to be quite time-consuming as I have over 10,000 pics on these three drives. What am I doing wrong> What is actually happening to these files when I organize them? I am constantly re-filing these pics for different purposes and I thought I could get around this with Elements.
View 1 Replies View RelatedMy company has upgraded to new computers recently (Windows 7, Civil 3d 2012). Some of the new computers are unable to access ANY survey database for edit. They can be opened read only, but the option of opening for edit isn't even available. The old computers we have CAN open the same databases for edit. We have attempted repairing/reinstalling, but to no avail. All the new computers were cloned from 1 original.
View 2 Replies View RelatedThe AEC content folders are missing. Actually, it's not missing but autocad is not able to locate them.
C:ProgramDataAutodeskACA 2012enuAEC Content.
C:ProgramDataAutodeskACA 2013enuAEC Content.
Is there any problem or bugs with the "AecDtlComponents.mdb" file type
I have linked files in a realtive path /sheets/ in my adboe ai file. We are generating 10,000's of images and placing them in the /sheets/ folder. The naming scheme is the same.
However when I share this project with a friend over dropbox. ai + /sheets/ folder. When he opens it up he's getting a ton of errors about the files not being found.
Does illustrator ignore linked file locations if the path isn't ABOSULUTE? Or if the newly generated images are overwritting the previous ones?
How can I fix this because we are looking at 10,000's of large image reaplcments that will take DAYS of mannual labor?
I currently use Photoshop Elements 6 and am looking at an upgrade to PSE7 or CS. The editing superiority of CS over PSE is not going to win me over because frankly I won't use most of it. I hardly take full advantage of what PSE6 has to offer as it is. However one thing about PSE that I don't like is how slowly it performs batch file operations. For example moving images from one location to another or reconnecting "Missing" files is very slow. Also the catalog backup utility is so exceedingly slow that I use SyncToy to backup my photos and catalog data. I have about 30,000 images in my collection, and I’m not too keen on breaking them up into separate databases. One problem I may have is that I keep my photos on a network store instead of local, but I don't think that accounts for the huge lag times in batch operations. One thing that would get me to spend the extra money for CS is if the database is more responsive (much more responsive) and if it handles batch file operations better (much better).
View 5 Replies View RelatedI understand the process of splitting faces and applying a Bonded Contact between the split faces when you have a bolted connection with a nut, but what kind of contacts would you use for say a threaded connection?For example, suppose you have a plate that will be bolted to a mold. The plate has clearnace holes for said bolts and so that the bolts are threaded into the mold to be lifted. The plate has a threaded hole for the lifting mechanism (Swivel Hoist Ring). Finally, the desired load is applied to the Swivel Hoist Ring and the bolts are placed in pre-tension. I would like to simulate this via FEA but am getting tripped up in the contacts. Also I am trying to make it as simple and efficient as possible (by eliminating any bolts or other parts that are not needed). I use INV Pro 2014.
View 4 Replies View RelatedI've got two pieces with 11/16" diameter holes for 5/8" bolts.
When I use Bolted Connection to place nut/bolt in the hole, it detects the 11/16" hole and sizes the bolt to look for 11/16" bolts. There aren't any 11/16" bolts so the window shows no bolts. I have to manually choose 5/8" for the bolt size in order to get a list of bolts to choose from. In my reading, i was thinking this was supposed to have been fixed by 2010, is that not correct?
Also, in testing another theory, after placing the bolted connection andt then editing the bolt size to 7/16" or 1 13/16" in diameter. The bolt doesn't update it's size to reflect the change in the hole. Is there really no correlation here? Is a manual change to existing bolts, nuts, washers, etc going to be necessary if the hole size changes? If i change the thickness of the plate(s) the bolt is going through, using autosolve updates the bolt length, but nothing seems to be checking the diameter of the hole.
If true, kinda harst to be able to make a completely parametric assembly of everything but the fastners.I'm using the Hole method on the bolt connection dialog with pre-existing holes that do not have threads on them.
Is possible to connect a pipe to a structure and not have in connected to the structure center?
I have some two-tiered structures that are 108" dia for the bottom section and 48" dia for the top section. The 48" top section is not centered I need my small 12"-15" pipes to connect to this section of the structure.
Civil 3D 2014
Win 7
I have yet to be able to connect to our ArcSDE database using 2011. In 2009 and 2010 Civil 3D I had to move 3.dll files from my ESRI directory to the FDO/bin directory for Civil 3D. This immediately allowed for a connection using CAD's Data Connect.
View 5 Replies View RelatedWhen i try to make a bolted connection my "click to add fastener > standard/category" box is empty. my hole, which used hole command, is 11/16" and the bolt only needs to be roughly 2" long so im not demanding odd fasteners.
inventor 2014
Windows 7 Pro 64
i7-3820 3.6GHz
32 GB RAM
2 TB HD
NVIDIA GeForce GTX 660 Ti
Liquid Cooled
3D Connexion
CM Storm
twin ASUS LED
I am running C3D 2013.
Is it a good practice to have several WMS connections already connected to the provider in our standard "dwt" template file? Will this affect the speed or performance of a drawing?
So I've got this part, and it's got bolted connections. There's two of them, and each one is a pattern of multiple #10 machine screws.
No matter what I do, one of them will always have a lighting bolt next to it, as shown in this picture:
Rebuild All doesn't fix it. Manually editing the bolted connection will fix the lightning bolt ... but it will invariably switch to the other bolted connection instead.
Also, another fun little thing I've found: if you grab one of the screws with the mouse and drag on it, only the first bolt in the pattern seems to be actually constrained to the hole. The others appear to have pretty much just distance constraints, maybe plane-axis constraints. You can rotate the whole pattern around the hole that the first bolt was set in. This doesn't seem like a good behavior to allow ...
Anyway, the data set for the above image is attached. The screws themselves aren't, but they're just content center parts and should get automatically generated if you open the assembly.
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
We're new to using bolted connection in our piping systems. They work great within a pipeline, connecting flanged fittings, etc. Where we have an issue is across two pipelines. Each pipeline is a sub-assembly, so in the bolted connection wizard it is impossible to select the mating flange on the other sub-assembly as the termination plane for the bolted connection. I want the bolted connection to show up in the BOM for one or the other sub-assembly, not at the top level.
Right now what I am doing is manually inserting what would be the mating washer and nut, from the CC and using an offset Insert constraint to make it appear to sit on the face of the mating flange, then pattern that... and THEN run the bolted connection for the bolt and another washer on the other side. This works, but is very time consuming. How this could be done across sub-assemblies, with all of the parts in one sub-assembly's BOM?
Bolted connections between two angled surfaces?!?
Is this possible ?!! Ive been working in various CAD packages and have found this to be an issue every time. Say for instance you want to bolt through a wall onto a tapered flange, how can you select a non parallel face as the start or finish surface?
Is it possible to use your own customer fasteners with bolted connections?
I other words, special nuts / bolts that do not appear in the Inventor standard libraries, that are essentially user created, defined and published.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
When a bolted connection is used, the bolt changes in length as the stackup of hardware increases and decreases. I have noticed that if I do not grab the red arrow to adjust the length, the amount the bolt extends past the nut
seems to be only about 2 threads. What is the formula Inventor uses to determine this extended length?
I'm currently creating a program to replace all fasteners in an assembly with there Metric / Imperial opposites. My program works and I've created a log file for any issues that do come up.
My question now is:
Is there any way to manipulate bolted connections through the API? Or is this not supported yet?
I cannot seem to find anything to do with them. It's strange though as my program creates an error log for the Lock Washers in the Bolted Connection (which it was struggling with previously anyways), but shows the other fasteners as being successful.
In my work i normally use our standard full threaded rods with square nuts. But, since we make the rods and nuts in the factory, they do not follow any international standard.
I wanted to add the threaded rods to the Bolted Connection menu in order to be able to automaticaly add the rod and to let inventor calculate the needed lenght.
I was able to add the rod to content center as an Ipart with all available sizes, but it doesn't appear on the bolted connections menu.
See attached our normal bolted connection, how can I add this to bolted connection so inventor will size it automatically to the needed lenght?
When deleting bolted connections from my assembly using design accelerator I am left with black cross hairs where the connections used to be, I can't seem to delete these from my model either in the assembly itself or by editing the sketch, what are these, why are they left over from a deleted connection and how do I remove them ... ? ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
If there is a way to create multiple instances of bolted connections using design accelerator instead of having to add one by one which takes forever ? All the bolted connections are of the same specification.
View 2 Replies View RelatedI needed to create a lot of bolted connections so that my design could be sent for FEA analysis.Connections with thru holes eg. nuts and washers on the back work fine beyond the everpresent update issues.
My issue is with tapped holes, my parts already have the tapped holes but the "Botlted connection" feature insists on creating a new tapped hole for me. This is not so bad but every time I have to update for moved holes etc when updating the bolted connection I get a new tapped hole.Would really like to get rid of that tapped hole?
Also when I get the extra holes I delete the feature and then have problems with the underlying sketch which I cannot access, how do I get rid of that sketch or how do I access it?
We'd like our bolted connections to show up as assemblies in our parts list rather than individual parts.
We've modified our CABoltCon.Imperial.xml template to make the assemblies B.O.M. structure 'Normal' rather than the default 'Phantom'.
Now we'd like to drive the assemblies description based on the bolt size used. For example, the description in the parts list would read "5/8" HEX BOLT C/W NUT AND WASHER".
I have an assembly comprised of 2 identical parts that have holes in a radial pattern. The holes were created at the part level, & the holes are obviously in both parts (they are not created by the bolted connection).
I've made a bolted connection using the "By hole" option & I've checked "Follow pattern." The bolted connection is made without any problems, & the "Follow pattern" populates all the holes as would normally be expected.
However, here's the problem: the only bolt/nut/washer assembly that appears to be fully constrained is the one on the base hole (by "base hole" I mean the hole that I initially selected). The other bolts/nuts/washers are not constrained to the holes. So, I can drag the entire pattern & it spins radially about the axis of the base hole.
I've never seen this ridiculous behavior before IV 2013.
I want to import a csv file into map3D and set the layers to which the blocks with attributes are inserted on. Using
Click Home tab > Data panel > Import From Files > mapimport.
Problem is, when I do this, I do not get the dialog that the help file says I should, like a place to define an insert layer or schema. All I get is the plain dialog that asks for formatting (file format such as autodesk up loadable file), Z unit, Coordinate system, and create block.
I also want to export the attribute data into a survey point file.
I've been given GIS data from a county and trying to design a water line using it. I have the .shp files for all the structures, roads, addresses, parcels, etc. bu the utilties are in a .mdb file. How do I use the .mdb to show the line work for the existing water line.
View 3 Replies View RelatedAutoCadLT2012 has deleted the data from all the files I was currently working on. The files are there and the backup is there , but all data has been removed. I have searched my entire computer (three hard drives) and Acad backup, auto save, etc. and the files are there, but no dwg.
View 5 Replies View RelatedI'm making a customized content center library for my company and I'm trying to add a special type of nut but I'm not having any luck. I finally figured out how to author a part and have it show up in the bolted connection tool. Now I'm just getting an error as soon as I select my custom nut.
The error is "Cannot initialize part data table. Please verify the table definition in Content Center editor."
I've attached my part. It's a simple nut for use in aluminum extrusion, the only thing that changes between sizes is the threaded hole.
How to import data from .txt files? Or from Excel? I'd like to specify some points and lead a spline through them. I've made a list (quite long) of coordinates in Excel and I wish I didn't have to type them all
View 2 Replies View Related