I am inserting a block into my drawing that has attributable text, and when I insert and pick the insertion point, the block prompts me immediately to fill in attributable text fields. My problem is that it runs through the sequence twice. How can I edit the block so it only does it once?
View 3 Repliesstarting a new job at work so setting up the job folder etc. grabbed the title block and the text attribute insert from the library.....
so here is when the issue started.....so title block and text attribute are both saved in model space, both have all the same settings, this also applies to the template we have here all match.
so i xref in my title page at 1:1 which comes in normal, then i insert my attribute block in at 1:1 but it comes in at some super size thing, normal 3.5 text size is now 1000......
have fiddled with everything gone back to the library set etc but got no idea.
the interesting bit is if i open the title block and insert the attribute block in, it comes in perfect......
so in saying that i am assuming it is the work template..... but none of this has changed for over a month and have created drawings since then........maybe a random setting somewhere has changed but again haven't done anything different to normal no new radical changes....
i have attached a copy of the title block and the text attribute.
I have created a dynamic block of our companies Stage section. The block is set up as a rectangular array using XY parameters.
The block itself works fine however I created block attributes in the block dwg to display its measurements using the Distance x and Distance y totals.
When inserting the block into a new drawing I need to explode the block in order for the array to work, however this also means that the text is no longer locked to the block.
InDesign has a great feature where the filename can be inserted as variable text which will automatically update whenever the filename is changed. Is there a plug-in for Illustrator which can do the same thing?
View 4 Replies View RelatedWe're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View RelatedHow do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedI can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedI have my title blocks, detail titles, bugs and other attributable blocks set up in 2007 and am using them in 2009. When I double click on the block to open the dialogue box in vs 2013 I don't know what to do with the dialogue box that comes up. I am an average user and set up these original attributable blocks, but I feel confident to modify them through 2009. But I don't know what to do with this dialogue box. I just want to be able to fill in the text I want in each field.
I've attached a pdf showing the two dialogue boxes I get, one with 2009 and one with 2013.
I am trying to insert a block from another drawing, the only way I have been to acheive this has been to open the drawing
Set ObjDocument = ThisDrawing.Application.Documents.Open("D:ACADBlocksGENERAL.dwg")
For Each ObjBlock In ObjDocument.Blocks
If InStr(ObjBlock.Name, "LOGO") <> 0 Then
CopyObjects
End If
Next
ObjDocument.Close
I would prefer not to open the drawing to access the block, is this possible in VBA.
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....
I wish to insert a title sheet dwg, which has attribute definitions, as a block in another dwg. I can insert it, and if I explode it, the attribute definitions appear. Otherwise they are not added to the database.
I am using standard code, which I can attach. it starts
Dim btr As BlockTableRecord
..
Dim blk As BlockReference = New BlockReference(ip, blkid)
' insert block
..
btr.AppendEntity(blk)
If btr.HasAttributeDefinitions Then
ForEach attID As ObjectId In btr
etc.
but btr.HasAttributeDefinitions = False
We have just done an overhaul of all our standard block symbols. These ultimately get saved into our title block template files.
Is there an easier way than Inserting each block individually?
Is there a variable that can automatically Redefine all blocks if I drag them in using ADC? The default setting is that any block that is already defined in that drawing will not get redefined.
Im having some troubles inserting a block into a line. See image. The block on the left inserts into the line and has attachment points (AutoCAD P&ID Provided) the block on the right i created. Im unable to get it to insert within the line without manually breaking the line after insertion, the result being the line through my block.
[URL]
Every time I insert a block (dynamic or otherwise) into any drawing (I have tried several) my ucs (0,0) changes to the insertion point of that new block. I don't know what I have done, what button I have inadvertently pushed or setting that I have set, but I do not know how to undo this!
Iam using AutoCAD 2014.
I have a block that is inserting as a group. When i insert my block then explode it parts of the block are grouped.
View 2 Replies View RelatedI have a ton of blocks with attributes. Sometimes when I insert them, AutoCAD (2011) prompts me in the command line (perfect). Other times, a prompt box appears to insert attribute definitions (annoying).
What setting do I have wrong, or am I setting the blocks up incorrectly?
Whenever I try to insert a block with attributes, the text comes in backwards/upside down... I've tried attedit, battman, mirror, properties, attsync, regen and torient. None of them work.
I've inserted blocks into drawings in the past with no problems, using the same template and workspace..
I'm working in a different department and can't figure out why the attribute box won't open when I insert their title block. I have checked that all the variables attmode, attdia, attreq, filedia, and cmddia are all set to 1 in both drawings. What am I missing? I'm using 2014. I'm attaching the drawing I want to insert.
View 4 Replies View RelatedIs there a way i can insert a title block through the design center by selecting the the layout and dragging it in. When i bring it in it gives me just the blank paper without the title block.
View 4 Replies View RelatedThe most efficient way of inserting a title block (the border around a drawing with text etc) into a layout? Sometimes when I insert a title block it seems like the title block is too big or too small for the layout .
View 9 Replies View RelatedQuery regarding layer control with blocks and stuff.
Traditionally to represent a computer on a drawing we would place two blocks, one would be the computer symbol itself, and one would be a unique reference (that we could attribute extract) directly above it. These two blocks, the symbol and the reference, would go onto their own two individual layers in the final drawing so that we could control the visibility and the color of both the symbols and the references individually. The layers, for example, would be called:
Computer Symbols
Computer References
Both of these blocks would be drawn in BEDIT on Layer 0, such that they take the properties of the layer that they are eventually inserted on.
I'm looking to combine the two blocks into one, but would still like the individual layer control. Is there a way I can combine the two blocks while still maintaining this individual layer control? I'm thinking that I'd have to draw the symbols and references on the above layers as opposed to Layer 0 in BEDIT, and then my 'new block' will probably have to go on a new 'total' layer like:
Computers
Computer Symbols
Computer References
So then I'd insert my 'symbols+references' block onto the 'Computers' layer. I don't really like this idea too much because it seems like I'm over complicating things (highly likely!). I guess what I'm really after is a 'symbol+references' block that moves as a group, but I can control in my traditional two layer approach.
I'm having trouble inserting my title block in a 3D drawing. I'm kind of new to 3D modelling but it's probably a small mistake i'm making.
I started with my view in SE Isometric, drawed something and then I copy/pasted my title block from another drawing, all in modelspace.
My drawing is 3D and my title block is 2D but in the wrong position.
Is there a way to set up autocad(2004) so that when I insert a block, the block then automatically breaks the line I am inserting it on. My drawing's are mostly electrical schematics so the line I am refering to is the circuit and my blocks are components. At the moment I insert my block and I have to use the command 'break'. I know this does not take up a lot of time but I am always looking for ways to speed up!
View 8 Replies View RelatedI am inserting a block but the wrong one keeps coming in. I know it's the correct file. Is it a regen thing? I had this problem using autocad before, but just don't remember what the fix is.
View 2 Replies View RelatedI want to insert a stored block into a drawing (model space). Below is the code I'm using and I get
Runtime Error '5': Invalid procedure call or argument.
Sub Dummy()
Dim COESTD_obj As AcadBlockReference, InsPtStd(0 To 2) As Long, COESTD As String
COESTD = "C:JimHYDROCAD_DwgsBlocksZ_COE_STDS.dwg"
InsPtStd(0) = 0#: InsPtStd(1) = 0#: InsPtStd(2) = 0# 'Set insertion point as 0,0,0
Set COESTD_obj = ThisDrawing.ModelSpace.InsertBlock(InsPtStd, COESTD, 1#, 1#, 1#, 0#)
End Sub
I am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection()
'Call the Function that returns strSectionBlk (the Head Section drawing)
getSectionDwg(strModel, strHeadType)
'Start the database
Dim db As Database
db = HostApplicationServices.WorkingDatabase()
[Code] .....
I'm trying to build a routine for my job to insert a block which consists of 3 single line variable attributes in a specific order. I need to be able to do this on many different drawings, and I would like to share this ability with my coworkers. Using the DesignCenter is not an option. In order to do this, I saved a drawing which consisted of the three attributes in the layout in which I need them to appear, however the order in which it prompts me to enter them is reversed. I already know how to set the order of attributes in an EXISTING block definition using the BATTMAN command, as every time I run the routine again, I'm redefining the block definition.
I'm not sure if it's important to know this, but the routine consists of a button with the following macro:
(command "-insert" "c:/folder/drawing.dwg" (getpoint "
Choose Insertion Point: ") (* (getvar "ltscale") 2) (* (getvar "ltscale") 2) "0");
EDIT: It works perfectly fine on my home computer, though my home computer runs an older version of acad.
I am trying to write a function to insert a block reference of a block definition which is already stored in the same drawing.
All threads are leads me to the way of inserting another drawing to current drawing with use of database.readdwgfile & database.insert.
How to use those methods for a block definition stored in the same drawing.