I am trying to write a function to insert a block reference of a block definition which is already stored in the same drawing.
All threads are leads me to the way of inserting another drawing to current drawing with use of database.readdwgfile & database.insert.
How to use those methods for a block definition stored in the same drawing.
I want to insert a stored block into a drawing (model space). Below is the code I'm using and I get
Runtime Error '5': Invalid procedure call or argument.
Sub Dummy()
Dim COESTD_obj As AcadBlockReference, InsPtStd(0 To 2) As Long, COESTD As String
COESTD = "C:JimHYDROCAD_DwgsBlocksZ_COE_STDS.dwg"
InsPtStd(0) = 0#: InsPtStd(1) = 0#: InsPtStd(2) = 0# 'Set insertion point as 0,0,0
Set COESTD_obj = ThisDrawing.ModelSpace.InsertBlock(InsPtStd, COESTD, 1#, 1#, 1#, 0#)
End Sub
How do I delete the AutoCad block symbols that are stored inside my drawing?
Not blocks that have been created that you can see on your drawing it’s the blocks that the point styles use and are stored in the drawing.
I am trying to insert a block from another drawing, the only way I have been to acheive this has been to open the drawing
Set ObjDocument = ThisDrawing.Application.Documents.Open("D:ACADBlocksGENERAL.dwg")
For Each ObjBlock In ObjDocument.Blocks
If InStr(ObjBlock.Name, "LOGO") <> 0 Then
CopyObjects
End If
Next
ObjDocument.Close
I would prefer not to open the drawing to access the block, is this possible in VBA.
I'm having trouble inserting my title block in a 3D drawing. I'm kind of new to 3D modelling but it's probably a small mistake i'm making.
I started with my view in SE Isometric, drawed something and then I copy/pasted my title block from another drawing, all in modelspace.
My drawing is 3D and my title block is 2D but in the wrong position.
I need to get list of all block reference in a drawing without iterating through all entities in the drawing.
View 7 Replies View RelatedI'm trying to build a routine for my job to insert a block which consists of 3 single line variable attributes in a specific order. I need to be able to do this on many different drawings, and I would like to share this ability with my coworkers. Using the DesignCenter is not an option. In order to do this, I saved a drawing which consisted of the three attributes in the layout in which I need them to appear, however the order in which it prompts me to enter them is reversed. I already know how to set the order of attributes in an EXISTING block definition using the BATTMAN command, as every time I run the routine again, I'm redefining the block definition.
I'm not sure if it's important to know this, but the routine consists of a button with the following macro:
(command "-insert" "c:/folder/drawing.dwg" (getpoint "
Choose Insertion Point: ") (* (getvar "ltscale") 2) (* (getvar "ltscale") 2) "0");
EDIT: It works perfectly fine on my home computer, though my home computer runs an older version of acad.
I have created a dynamic block of our companies Stage section. The block is set up as a rectangular array using XY parameters.
The block itself works fine however I created block attributes in the block dwg to display its measurements using the Distance x and Distance y totals.
When inserting the block into a new drawing I need to explode the block in order for the array to work, however this also means that the text is no longer locked to the block.
I'm using Architecture 2011, but the problem is pretty generic.
I am working with a very complex vendor drawing and using it as an xref to my working drawing. I need to be able to freeze parts of the xref and change colors (for plotting purposes) of other parts. Under ideal circumstance this would require simple layer manipulation.
My problem is that a large percentage of the vendor drawing is made up of blocks. There are nearly 1000 different blocks. Most of these blocks were created using layers other than 0 - quite often more than one layer is used. Sometimes the block is inserted on a layer that was used in it's creation, sometimes not. The only way I can omit one of these blocks from my drawing is to figure out what layer was used in it's creation and freeze that layer. You can see how this could be a pretty tedious process.
My limited CAD knowledge only gives me: edit all 1000 blocks, changing them to layer 0
I had been trying to insert a title block (block) in to a drawing as part of changing the title block But in some drawings the block gets scaled off. Is there any system variable or any solution to maintain the drawing without getting scaled while inserting block.
I had used -dwg units and this appears to single drawings only. Any other way to do this to all the files in a folder.
Having problems when copy/cut and paste. When pasting or inserting a block into a drawing the subject disappears.
View 4 Replies View RelatedI am getting this error in my production drawings.
My setup is as follows:
- EG.dwg has my existing surface in it. I create a data reference to use it in other drawings.
- Level One.dwg has the EG surface data referenced in, and I use this to create alignments, profiles, and finish surface. All of these are turned in to data references.
- Storm Sanitary.dwg has my pipe designs. I data reference in the two surfaces, profiles, and alignments, and create pipe networks. I create references for these networks.
- Plan Profile.dwg is the production sheet I'm getting this error from. Every one of my civil objects is data referenced in to this drawing. Everything is inserted correctly, the pipes show correct FG surface elevations for their rims, etc.
BUT when I open this drawing, I get this error. I assume it's because my FG surface is not directly in the storm sanitary.dwg.
How do I get rid of this error, without combining drawings, or promoting the surface to one or more drawings? Isn't this exactly what data references is made for?
We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
I have created d/blocks for my different pipe sizes i.e one block with a dropdown to select the different sizes and have done the same for my flanges. now how do I link / insert the flange d/block to the piping block so that I can export the information into a material list later on.
View 1 Replies View RelatedHow do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedI can insert a block with block attributes using the Inter op very easily:
Dim theBlock AsAcadBlockReference
Dim pickScreenVBA = myDoc.Utility.GetPoint(, "insert the hydrant")
theBlock = myDoc.ModelSpace.InsertBlock(pickScreenVBA, "Hydrant", 1.0#, 1.0#, 1.0#, 0)
Dim varAttributes AsObject
varAttributes = theBlock.GetAttributes
varAttributes(0).TextString ="3 Ports"
varAttributes(1).TextString ="Salt water"
Works great, but when I try using the non-inter op, all the example insert new Attributes and not add block with existing attribute (so I end up with duplicate attributes for each block - i.e "Salt water" attribute is added to the block each time I run the code),
Are they any examples that does the same as above using the non-interop code?
I have several blocks saved as separate .DWGs, some of which are dynamic. I want to review and test these blocks, but I can't find a way to open the existing block definitions in the Block Editor without first inserting the blocks into a drawing.
View 5 Replies View RelatedI'm trying to change block the definition of an block reference.
I did something like this:
blockreference.BlockTableRecord = newBlock.ObjectId;
In most cases this works well. However I found a case that it not work as well. When I try to change the definition from a new block that I have created in my test DWG, it disappears from the model.
I have a block: “Block_A”. I am trying to determine if a block reference of the block exist.
Currently I would iterate every block Reference in the Block Table, and then dig deep into each block ref . . . . .
I was wondering if I could just take “Block_A” and see if it has reference and where the references are. Perhaps this is just wishful thinking but I was hoping for a faster way to obtain the references then to iterate thousands of blocks in each table record.
Drawing contains a block with "BlkName". I want to insert blockreferences of this existing block using .Net. All shows how to insert a new block and then use the BlockID returned by the insert function. In my case I only have the block name and there is no Block id. How to get it or how to create a block reference of an existing block?
View 3 Replies View RelatedI would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
I have this code to insert a block (the block has Attirbutes) it bring in the block but strips the attributes. Here is the C#
[CommandMethod("PUTBLK")] static public void test() { string comp = "C:\test.dwg"; Document doc = acadApp.DocumentManager.MdiActiveDocument; //Editor ed = doc.Editor; Transaction tr =
[Code].....
I wish to insert a title sheet dwg, which has attribute definitions, as a block in another dwg. I can insert it, and if I explode it, the attribute definitions appear. Otherwise they are not added to the database.
I am using standard code, which I can attach. it starts
Dim btr As BlockTableRecord
..
Dim blk As BlockReference = New BlockReference(ip, blkid)
' insert block
..
btr.AppendEntity(blk)
If btr.HasAttributeDefinitions Then
ForEach attID As ObjectId In btr
etc.
but btr.HasAttributeDefinitions = False
We have just done an overhaul of all our standard block symbols. These ultimately get saved into our title block template files.
Is there an easier way than Inserting each block individually?
Is there a variable that can automatically Redefine all blocks if I drag them in using ADC? The default setting is that any block that is already defined in that drawing will not get redefined.
Im having some troubles inserting a block into a line. See image. The block on the left inserts into the line and has attachment points (AutoCAD P&ID Provided) the block on the right i created. Im unable to get it to insert within the line without manually breaking the line after insertion, the result being the line through my block.
[URL]
Every time I insert a block (dynamic or otherwise) into any drawing (I have tried several) my ucs (0,0) changes to the insertion point of that new block. I don't know what I have done, what button I have inadvertently pushed or setting that I have set, but I do not know how to undo this!
Iam using AutoCAD 2014.
I have a block that is inserting as a group. When i insert my block then explode it parts of the block are grouped.
View 2 Replies View RelatedI have a ton of blocks with attributes. Sometimes when I insert them, AutoCAD (2011) prompts me in the command line (perfect). Other times, a prompt box appears to insert attribute definitions (annoying).
What setting do I have wrong, or am I setting the blocks up incorrectly?
I am inserting a block into my drawing that has attributable text, and when I insert and pick the insertion point, the block prompts me immediately to fill in attributable text fields. My problem is that it runs through the sequence twice. How can I edit the block so it only does it once?
View 3 Replies View RelatedWhenever I try to insert a block with attributes, the text comes in backwards/upside down... I've tried attedit, battman, mirror, properties, attsync, regen and torient. None of them work.
I've inserted blocks into drawings in the past with no problems, using the same template and workspace..