I have topography in 5' contours that I need to shrink down to 20' contours (ex. Elevations:4670,4690,4710)
Is there some sort of quick selection I can use to select the elevations I need to delete?
I'm trying to label elevations on some large contours.
The problem i'm having is that 'multi line' does not give me enough elevations, while 'advanced placement' gives far to many elevations for mapping and plotting purposes. Is there a way to have more control on how Map labels contours?
I have multiple paper spaces to show a variety of drawings. I currently have my floor plan as a viewport, but I need to delete it in order to add in my elevations. I tried deleting my current viewport, but it also deletes the rest of mine. How do I delete a viewport from only one paper space, so that it does not interrupt with my other drawings?
View 1 Replies View Relatedwhere the contours of each surface are separated into different layers? Usually it just produces two layers for all of the contours, major and minor.
View 1 Replies View RelatedI have many surfaces overlapping and I want to create one surface with the lowest elevation for each x,y coordinate from the existing surfaces. Does autocad civil 3D have a command for this?.
View 3 Replies View RelatedIs there a way to have multiple elvations on a single point?
Such as with a top & bottom of curb.
I have tried to add a component to the style, assign the name as the control, and put in the elevation
I want, but you can't have multiple points with the same name.
I am working on three different projects at once. For each project, I was sent a drawing with contours as polylines. Each contour is broken up into polylines about fifty feet long each at elevation 0. I am trying to set the polylines to proper elevation without editing each one individually. Each drawing contains several hundred polylines to modify. I was hoping for some sort of way to use a fence and interval (2') with a starting elevation.
I've searched the internet but haven't found a lisp routine to do this. I thought I remember Land Desktop having something like this, but can't seem to find it in Civil 3D 2012. I have found several threads asking the same question. Each time the poster was referred to a blog 7629. That blog unfortunately seems to have been taken down. If I can’t find an answer soon, it looks that my best option would be to retrace each contour which makes me glad to be paid hourly.
I am having a problem with a blueprint for a house. the plan was sent to me dwg. We use pdf factory to print the plans. This leaves a black spot where ever the dwg has mask on the dimensions. Which happens to be throughout the plan and it will only let me take it off one text box at a time. There is way too many dimensions in the plan for this to be practical. how to remove this mask from all? I am using autocad lt and pdf factory to print.
View 4 Replies View RelatedSome background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
I am importing about 20,000 pictures from Flickr. they are all creative commons, and the end result will be the use of approximately 4000 of these in an online sign language dictionary. I use Bulkr to import them and this process imports the tags as well as other information such as the photographers name and url. Many of these photos arrive with hundreds of tags, so that the total number of tags might be 20000 or more. I need to assign my own tags and delete all the tags that the photo arrived with. I use the lightroom batch delete to do this (the little minus sign at the top of the keyword list). i select a keyword, hold down the shift key and scroll down. the problem is that i cannot just scroll down to the bottom of the list. There appear to be unpredictable keywords that cause the shift-select process not to work. if i scroll back up and then carefully scroll part of the way back down, then there will be a point at which shift-select stops working and above that it works. The end result of this is that it takes numerous shift-select-scroll down-select to delete everything so that what should take maybe 2 minutes takes 20 minutes or more.
The problem may be related to foreign language keywords especially chinese characters, but even what looks like a perfectly ordinary keyword can stop it. Two recent examples: travelers cheque and Київ. In all cases, the words can be deleted when i click directly on them. you just cant shift-select THROUGH them.A separate annoyance that i will just grumble about is that i was forced to put these pictures in a separate catalog because there is always the risk that i could manage to delete my own keywords while batch-deleting everyone elses, and there is no simple way that i know of to undo this. with the separate catalog at least i wont delete all the keywords for my own pictures.
I have a few points within an area of 2m x 2m and I will like to create contour lines. At the moment I can only produce models with shade difference.
Thge contour command does not accept sub 1 metre accuracy (putting 0.1m does not work).
Is there something I can do?
I create a contour layer from a DEM raster and everytime it comes out about 700' offset from the DEM.
View 8 Replies View RelatedIm trying to make a 3d model of a site in AutoCAD and it seems lofting between some contours is impossible, this is driving me insane, first it told me there was a U and V derivative problem so i loft the surfaces that i could but now there is a gap where it refuses to loft and i cannot create a surface in that gap using network or blend or pach.
View 3 Replies View Relatedi'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.
View 2 Replies View RelatedI'm drawing a topo and trying to figure out a way to manually smooth out my contours. I'm not talking about the little jagged edges that you can remove if you use the smooth surface option under surface properties but the big ugly looking jumps you see when contouring a relatively flat lot. In the ancient version of AutoCAD my company used the contours came in almost like splines and you could move the vertices around to make them look good. I know you can go in and delete some TIN lines and edit point elevations but that is very time consuming and I'm hoping there is a quicker way.
I know I can extract them into polylines but there are too many little segments to be useful. I've seen the SIMPLIFY SURFACE option and while that takes away some of the roughness it creates some as well. Is there some better option than extracting and then drawing a spline between the parts I want to smooth out? These contours don't need to be 100% accurate, I just need them to look simple, like if someone was drawing them by hand.
I have added contours to my surface (the blue lines). For some reason the surface generated contour (the orange line) is jumping across the contours I've added.
View 8 Replies View RelatedWhen exporting 3D contours, what property do you use to export the elevation to attribute data in the shapefile?
View 2 Replies View RelatedMy TIN surface either did not generate contours or did not display them on my drawing. I created and tried surface styles of many contour intervals(from 0.5' and 4' to 2' and 10') without success. I made sure my contour layers on both the Style Dialog box Display Tab and Layer Properties Manager were turned on, still no success.
View 6 Replies View RelatedI'm having problems contouring in C3D 2014.
I'm using the command PL - polyline to create my break lines (Centerlines, top and bottom of curb)?.
In this particular drawing the first point I click on is carrying the elevation throughout the entire length and yielding bad contours.
Essentially the bottom of curb on each side of the street should be the same elevation with a crown at the centerline.
Instead the elevations are about five feet different because the beginning point is around the corne at a point of tangency on a hill.
This has not happened in any other drawings and I've done them the same way.
I redid the breaklines with the 3DPOLY command and aside from a few minor edits the surface came out OK.
I've been reading about 3DPOLY command but have not found out too much about what the actual difference is between 3DPOLY and PL commands.
Seems like 3DPOLY is the way to go.
I do not have too much experience with C3D 2014 and am making a huge jump from 2004 LDD. How to build 3D surfaces/contouring.
How to draw contours in Autocad 2010 LT? Is it possible without eagle point?
View 3 Replies View RelatedWhen I generating contour(surface) using Civil 3D it gives very complicated contours.Some times those contours cuts each other and have very strange shape.
I used to use SURFER software to generate contours.It gives simple contours.But I like to use Civil 3D because.
I attached SURFER contours and Civil 3D contours. I also attached AutoCAD file those who using older versing of Civil 3D.
I know how to smooth contours in Civil 3D but it does not solve my problem. You may say "You should use commands like swap edge,delete line .
I want to color fill between contour lines. Most of the plug-ins I have tried only color the actual contour lines. Some of the large stand-alone packages say that they do it, however most are beyond my maker financial reach.
So my queries are: can this be done within any AutoCAD package? Are there any known plug-ins that can do this?
Or will I have to commission a customized plug-in. The image below is an example of the color fill required.
DH Colored Cont Image of 001.jpg
We have a total of three machine at our office that are running 64-bit Windows 7 with Civil 3D 2013. Two of the three machines have problems with drawings that include AECC_Contours. When you try and start a polyline or line the mouse will begin to jump and lag. As you move the cursor off of the AECC_Contours the mouse returns to normal operation. I have looked around throughout forms and have yet to find anything that relates to this. Also I have disable Aero within Windows, thinking that may have been the issue. All three machines are running the same version of Civil 3D with the latest service pack.
View 6 Replies View RelatedWhile working in a drawing with civil 3D points and a surface created from those points, once in a while the contours will disappear. The contours disappear during any number of different commands, so it doesn't seem to be linked to a specific set of commands. If we save the drawing, close it, and then open it back up the contours are there with no problems. Is there a fix for it beyond closing and reopening the drawing. We are using Civil 3D 2010 in our office, and all of the current updates.
View 5 Replies View RelatedIm working in Civil 09. I need to adjust the surface I created in order for the contours to be correct. Right now I'm interpolating point elevations to adjust the contours. I find myself adding lines and adding and deleting points. It's tedious. I tried changing the grid spacing to smaller one. It didn't seem to work.
View 9 Replies View RelatedI have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I encountered a problem while creating contours from the points. what actually is the problem with the points or tell the steps once again that would be great. I'm attaching the points file.
View 9 Replies View RelatedI'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View RelatedI am having an issue with my contours running through my breaklines (feature lines). I have tried re-ordering the breakline, edits, etc and have also set my settings to allow crossings.
View 9 Replies View RelatedWhenever I zoom out in a drawing in Civil 3D with surface contours, some of the contours disappear. I imagine this is a result from a system variable setting but could not find it.
View 2 Replies View RelatedThis is the first time I have imported a .dgn file into Civil. The drawing contains contours lines with Z elevation data. When I create a surface using this geometry (polylines + some lines) the surface seems to be scaled in the Z axis by 12.
For example pline (from dgn) is at elevation 46' but the Civil3D surface is 552'
I assume this is a setting in the Surfaces dialog box, but I cannot find it.
Also the elevation field in Properties from the dgn contours is weird. For example, in one area the (pline) contours display -28', 26', -24', -22', -20', -18' in Properties but Civil3D interprets this as a downward slope - which is the actual field conditions. I don't understand the conversion going on here.
The geometry of the pline and contours generated from the surface seem to line up in a side or isometric view (see attachment).