The demensions are not being displayed properly in paperspace on the drawing. ie the part should measure 160 inches. when it demen. the product in paperspace it will only measure 3 inches.
But on a different part of the drawing it measures correct demensions?????
I was working with ilogic, Adding a new rule and all of a sudden I got an error and when I double click on a parameter to add it to the code, the format changed.
It used to look like this when I added a parameter: Parameter("vertical seperation:1", "partitionthickness")
but now when I double click on a parameter I get this: vertical seperation.ipt.partitionthickness
Also when I right click on a parameter and select display current state, It does the same thing, for some reason the code does not display like it used to.
I got an error when this first happened and I tried reproduce the error again but it did not appear again. This affected all my parts and even in different projects.
I re installed inventor because I thought there might be a file link broken but it did not fix it.
how to round a parameter using ilogic.
For example. I have Roperev=Roperev_1. Roperev_1 is determined by an excel equation. I need Roperev to produce a nominal number because this parameter dries a coil revolution and I need the revolution to be a whole number.
I can not just round the excel result because the excel result needs to be multiplied by 2.53 to get the resultant for Roperev_1
When I import a part from content center, a tube in this case, I get a length parameter called <PL>.
I am using this parameter in the parts lists, so it shows "=Outer diameter x thickness x <PL>"
However I don't want trailing zeros, leading zeros or units string to be shown.
I know I can open the parameters window, right click the parameter, then click custom property format and then uncheck these boxes and its fine.
But I want to know if there is a smarter way to do this, like creating a rule to execute on all the parts?
I have around 500 pipes with the parameter <PL> that needs to be changed.
I have built a vb interface using a tutorial from AU. Now I would like to do the same without the interface.
Inventor uses ilogic to pass parameters to the dll - the dll does the number crunching & returns values to Inventor - no interface required.
The tutorial uses an OK button to fire values back & forth - how can I do this without a button? I would like this to fire in the background without a form appearing.
I know how to get a parameter into my list of custom iProperties.What I want to do is take the iProperty lbmass and add it to the list of user parameters. Is there any way to do this without using iLogic?
View 8 Replies View RelatedI have several part models that are very simple and are basically long cylinders. I want to create an external ilogic rule that i can run in each part file that can identify the largest sketch parameter dimension. So basically it will find the Length of the cylinder due to it being a larger dimension and then rename the parameter.
I could just name the cylinder length sketch parameter the same in each part file, but I wanted to attempt to make it more universal for all users. So if a new user forgets to properly label his part parameters, the ilogic program can identify what parameter it should be looking for and rename it properly.
In 2009 Inventor iLogic, we have a button to delete all parameters and rules. But now, in 2013 Inventor iLogic, I only find a button to delete all rules. Where is the button to delete all parameters?
View 9 Replies View RelatedGet the i-logic parameter tab on ribbon. I am not able to locate that in my 2013 version.
have a look on attached image.
Is there a way to create a multi-value parameter with ilogic?
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
I wish I perform the following code with iLogic. Is it possible to change a model parameter to a reference parameter?
If My_Expression Then' My dimension "d0" is a Driven Dimension' or' My dimension "d0" is a Reference ParameterElse' My dimension "d0" is NOT a Driven Dimension' or' My dimension "d0" is a Model ParameterEnd If
How to set multi parameter, iproperty using ilogic (or smth else)?
I hav eparameters: d1=50, d2=100, d3=5. I need to set a new multi parameter/iproperty that the final value is:
Angle 50x100x5 (suppousedly code should contain smth like: "Angle", "d1", "x", "d2", "x", "d3") but I do not know exactly...
Is it possible to update an existing User Parameter. While I can only delete-create a new. In this case the connection is lost with BOMQuantity.
View 5 Replies View Relatedway to rename a new dimension parameter in sketch with a dialog box directly not having to go to Functions or diemnsion properties.
View 2 Replies View RelatedThe rule iterates through an assembly looking for parameters. If it finds them it 'pushes' the value down from the top level Assembly into the sub-components.
It works well, but each component updates dynamically as the parameter value is changed. This looks a bit jerky and weird.Is there any way to write the script so the the updates all happen at once at the end?
' set a reference to the assembly component definintion.' This assumes an assembly document is open.Dim oAsmCompDef As AssemblyComponentDefinitionoAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition'Iterate through all of the occurrencesDim oOccurrence As ComponentOccurrenceFor Each oOccurrence In oAsmCompDef.Occurrences'check for and skip virtual components'(in case a virtual.
[code]...
Is it possible with iLogic code to set a parameter in a bunch of parts equal to another paramter?
I want some iLogic code that will go into my pipe parts and make the PL param = D2.
The commented code does not work. I want to be able to open a part and change its size parameters before i open the assembly. this code will run as an external rule in a new empty file.
If i can do it without opening the part, that is even better. Test can I open a part, change a param, then close part.
Dim fname As String
fname ="C:Workspacemy_progchanF_BB_L.ipt"
Dim pDoc as PartDocument = ThisApplication.Documents.Open(fname,False)
pDoc = ThisApplication.Documents.Open(fname)
These are just attempts to find a syntax that works. I need the method to change the parameter.
'param = pDoc.PartComponentDefinition.Parameter.Param("TKNS")
'pdoc.parameter.Param("TKNS") = 8
pdoc.Save
pdoc.Close
I am struggling to find the right ilogic to extract the state of a multi-value text parameter and use it to populate a single i property.
View 1 Replies View RelatedI am trying to have iLogic change the custom property format for my user parameters. I am able to work with linear measurements, but I would like to also work with angular measurements. I want my angular units to be "Degrees" the format to be "Deg-Min-Sec" and the precision to be DD MM.
Below is my code to change the units to deg, but I can't change the format or precision:
Dim oPartDoc As PartDocument
oPartDoc = ThisApplication.ActiveDocument
Dim oParameter As Parameter
Dim oFormat As CustomPropertyFormat
[Code]....
I have a multi body part that I componented into an assembly. I am trying to get the assembly parameter in this case, "Height" to drive the parameters in the part model. I think I am using the right code but I get an error when I run the rule.
View 5 Replies View RelatedIm quite new to customizing inventor and have been playing around with I-logic. I can get I-logic to enter values into existing ipt paramaters when run from a rule within the idw. I can also get I-logic to create a custom Paramater within the ipt using some copied API code, however I dont know my way around API at all yet. So...
I was wondering if it was possible to create a custom part parameter from an ilogic rule run in an idw with that ipt featured?
Macro for writing the sheetmetal Extents width and length to the custom properties. I need to get these values into the part parameters so that they can be used in the BOM.
I can get this to work if I manually create the "SM_Length" user parameter, but how do I make the iLogic CREATE the parameters if they do not already exist? I think it would be something added below the "Catch..." just cant seem to figure out what it needs to be.
'look for custom iproperty and try to set it
Try
iProperties.Value("Custom", sExtLength)=Round(SheetMetal.FlatExtentsLength, iRoundValue)
Parameter("SM_Length")=Round(SheetMetal.FlatExtentsLength,4)
Catch
' assume error means not found and create it
customPropertySet.Add(Round(SheetMetal.FlatExtentsLength,iRoundValue), sExtLength)
EndTry
I want to use iLogic to create User Parameters with Multi-Value lists filled with info from an excel spreadsheet. What is the code to create a new User Parameter?
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
I have a text parameter "ARM_TYPE" that kicks out a numaric parameter "ARM_ANGLE" through an ilogic rule. My problem is i need to have the rule kickout an error when (ARM_TYPE= "none"). I can do this by changing the "ARM_ANGLE" parameter from a Numaric to Text format (see below). The problem here is that "ARM_ANGLE" is used in several more ilogic rule calculations generating other parameter values which also need to kick out an "error"
If Parameter("ARM_TYPE") = "A995" ThenParameter("ARM_ANGLE") = -12ElseIf Parameter("ARM_TYPE") = "A1023" ThenParameter("ARM_ANGLE") = -3.7ElseIf Parameter("ARM_TYPE") = "A1081" ThenParameter("ARM_ANGLE") = -44.1ElseIf Parameter("ARM_TYPE") = "NONE" ThenParameter("ARM_ANGLE") = "####"End If
I have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies View RelatedI have a flange that I use iLogic and the parameters list to update the different styles. My problem is that my flange won't update until after I hit save and update. My other square flange is not this way. As soon as I change the parameter in my square flange it immediately updates. Is there anyway I can get my round flange to update immediately like my square flange? I attached pictures below.
View 1 Replies View RelatedI've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
When I have a sheetmetal part with an iLogic rule in it and I delete a feature, Inventor sticks this garbage into my rule.
View 7 Replies View RelatedAny way to modify a user form parameter's read only status using a rule?
I have a parameter that I want people to be able to edit when another parameter is set to true and to be locked if it's set to false. The only thing that comes to mind is have a rule that will just switch the value back automatically if the user changes it but it would be good if i could control the read only status.
I have a MultiValue Parameter that I want to populate using a named range from an embedded excel spreadsheet. I would like an iLogic solution if possible because I need other people to be able to understand the code without too much difficulty.
One of the sample snippets given allows access but not if the excel file is embedded.
'GoExcel.NamedRangeValue("Part_Width")
The code below works but not when using a named range.
' Load bearing housing typesMultiValue.List("parameter1") = GoExcel.CellValues("A1","A20")
Is there something I'm missing? I was hoping to use something like below
' Populate MultiValue Parameter from excelMultiValue.List("parameter1") = GoExcel.CellValues("3rd Party:Embedding 4", "Sheet", "myNamedRange")
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub