I received a rather large assembly file from a client that was done in Pro E. I was wondering if it is possible to change the entire assembly from Default material to steel without having to go into each individual part and changing its material manually (which could take several hours) I am using INV 2012 Pro with SP1 installed.
View 2 RepliesI am looking for a material database with more steel types than the ones that are installed in inventor.
Is there a comprehensive database that I can download and install or do I need to add the material one by one.
Normaly I can just copy a existing steel and just use the existing properites and just change the name but I see a risk of this since in the future I may want to simulte a part and then the material data is not correct.
So... is there a good list that I can download and install??
When assigning materials to a part in inventor the process is simple, however when one wishes to assign a specific steel type ie ASTM A516 as opposed to just a generic steel then this is where it gets a little more complicated.
This specific steel type will also need to be called up in the parts list relevant to the individual part that it is attached to.
I know that a custom material can be added to the favourites section in the materials library,and this can be done if required.
Have i delved deep enough into the inventor materials library , do the basic steel and others materials ie plastics break down into specific types with their elastic properties,yield stresses etc etc in other words a more comprehensive materials library or is this something that must be created by custom material input.
I got this code below to place a channel in an assembly, but don't know how to change the length of the steel.
' Set a reference to the active assembly document. Dim oDoc As AssemblyDocument oDoc = ThisApplication.ActiveDocument ' Set a reference to the ContentCenter object. Dim oContentCenter As ContentCenter oContentCenter = ThisApplication.ContentCenter ' Get the content node (category) "Structural Shapes:Channels" Dim oContentNode As ContentTreeViewNode
[code]..........
Because of i am using 235 graded steel for design,is it possible to change steel mild's grade (207 N/mm2) to 235 N/mm2?
View 1 Replies View RelatedIs there a way to set the default material in Frame Generator? I have a custom library for Content Center so I can modify that if needed. I would like structural members to default to ASTM A36 for example.
Inventor Pro 2013 (product design suite)
Product Design Suite Ultimate 2014
Vault Professional 2014
Windows 7 Pro SP1
HP-Z400: 2.67 GHz 12 Gb Ram
Nvidia Quadro FX1800 driver 276.42
It occurs when a user tries to run AutoCAD 2013.
And returns the error
"Unhandled Exception E0434352 at address FE0DCACDh"
I changed the material using the vb.net code shown below.but after changing material the object is not updated ,the volume and mass didn't change .
Dim oDoc As PartDocument
oDoc = inventorApp.ActiveDocument
Dim oDTProps As PropertySet
oDTProps = oDoc.PropertySets.Item("{32853F0F-3444-11d1-9E93-0060B03C1CA6}")
[code]....
If I need to change the material of all parts in an assembly I find it convenient to do this in the BOM. In the 'parts only' view I add the material column, change the first one and just drag it down like in Excel.
There are however some parts where the material is greyed-out (see attached image) and I cannot change them in to something else. I already traced this to parts which are present in multiple different sub-assemblies. I guess that's also the reason for the blueish/red icon instead of a normal part icon.
If I open one of the sub-assemblies the part is fine and I can change the material.
Inventor 2013
I am trying to change the iProperties "Physical" "Material" using an Inventor VBA macro..For example, say the material is set to "DEFAULT" and I want to change it to "TITANUIM", how can I do this using VBA?
View 1 Replies View RelatedIn a project I'm working on I need to make the text have mirror properties. But when editing the text all i can choose from is "normal" colors.
So is there any way to make text use materials, like you do on normal surfaces?
I have a problem with the Bolted Connection tool in inventor. When I use it to place fasteners in my assembly everything works fine, i can select the material I want, etc... The problem is whenever I need to change something in it, the fasteners changes to the first one in the list that appears when you click the ... button, which means that I always get the wrong fasteners. The workaround we found was to click the ... button again for all the fasterners, and this has to be done in the right order (start to end) otherwise I will get again the wrong fasteners and to select the fasteners again.
One more thing, I'd like to know if it is possible to have a more user-friendly way to change the bolts in bolted connection. I would like it to be like when you import a component from the content center, with that dialog box. As for now, I have to choose the bolts with their part number while when I import them with the content center, I have all set the key values.
I wish I can open my general assembly BOM and set the proper Materials to my all my parts after migration from 2012 release.
But I cannot change Material for the some custom part in the assembly BOM in the Parts Only tab. Parts refusing to change a Material have special symbol and I guess it means “promoted assembly” – no info regarding these symbols.
I can change any Material in Structured and Model Data tabs but it is extremely inconvenient for the big assembly.
[URL]....
The questions is: Why those promoted assemblies have inaccessible Material in the Parts Only tab?
I have similar subassemblies built in similar way as you can see fro video, but one is treated as promoted assembly and other as promoted part, the question is what possible difference between those is?
The attached part has some bad work features on it, but I don't care about that (easy fix). It also contains a rule that simply changes the material from "P AND O" (pickles & oiled) to "201 S/S", for some reason the faulty work geometery causes this rule to throw an "unspecified error". If you delete the bad work geometry the rule runs fine.
View 2 Replies View Relatedhow to change an "IPT" files iProperty "Material" with a VBA macro?
For example,
If I have created a part (ipt) file, the iProperties "material" is set to "Default"
How can I change the material to say...."GOLD" (Example Only!!!) using a AutoDesk Inventor VBA macro?
I need to change an entire assembly's parts to a different material. How can I do this without editing each part?
View 2 Replies View RelatedI get this error message when attempting to change the material in the frame generator.
View 9 Replies View RelatedHow to change the units to metric in material editor? See attached picture
View 1 Replies View Relatedwhy the script below doesn`t change Physical material properties? It changes the thickness of the part, but not material properties on the BOM...
ShThk = InputListBox("Sheet Thickness", MultiValue.List("ShThk"), ShThk, Title := "Choose Thickness", ListName := "Thickness")
' material thickness from multi-value parameter called ShThk
If ShThk = 0.3125 Then
SheetMetal.SetActiveStyle("5/16"& Chr(34))
Else if ShThk = 0.25 Then
SheetMetal.SetActiveStyle("1/4"& Chr(34))
Else if ShThk = 0.1345 Then
SheetMetal.SetActiveStyle("10ga")
else if ShThk = 0.105 Then
SheetMetal.SetActiveStyle("12ga")
else if ShThk = 0.1793 Then
SheetMetal.SetActiveStyle("7ga")
End If
When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
How do I change the spelling of Aluminum to Aluminium in the material database in Inventoe.
View 1 Replies View RelatedHow do I change the a part material render style within an assembly?
I have tried this below. It changes the name but doesn't update the render style.
Sub Material()Dim oassy As AssemblyDocumentSet oassy = ThisApplication.ActiveDocumentDim ocompdef As AssemblyComponentDefinitionSet ocompdef = oassy.ComponentDefinitionDim ooccurr As ComponentOccurrencesSet ooccurr = ocompdef.OccurrencesDim opartdef As ComponentDefinitionSet opartdef = ooccurr.Item(11).Definitionopartdef.Material.RenderStyle.Name = "Red"End Sub
I want to change the material of a sheet metal part using inventor api.I tried something like code
Dim partDoc As PartDocument partDoc = inventorApp.Documents.Open(FilePath & filename, False) If partDoc.SubType = "{9C464203-9BAE-11D3-8BAD-0060B0CE6BB4}" Then Dim smDef As SheetMetalComponentDefinition smDef = partDoc.ComponentDefinition Dim style As SheetMetalStyle style = smDef.SheetMetalStyles.Item("sheetMetalRule")
But I can't get the code for material change.
I am completely new to ilogic but would like to make a rule in my idw file that change the hatch pattern in a section of a specific material.
Short Version:
I have an aluminum extrusion part. Material is set to Aluminum-6061. In any section view of this part I want the hatch to be ANSI 31 with a rotation of 45 degrees and a scale of .02 How do I do this?
How do we change sheet metal parts material, thickness Bend Radii from an assembly in groups.
View 3 Replies View RelatedHow can i change my default setting from picture 1 to a new setting like picture 2 when i open up a new part file and assembly file.Is there a setting i can change so whenever i open a new part file & assembly i have this setting as my default.
IV2012
When i setup inventor 10 i choose to use inches, but now i want to use MM how would i change it under inventor 10 i thought it would bbe under options but it not.
View 6 Replies View RelatedI can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View RelatedI am using Inventor version 2011. I wrote this code which tells me which object defaults style is active
Public Sub ActiveObjectDefaults()
Dim oDocument As DrawingDocument
Set oDocument = ThisApplication.ActiveDocument
Dim DrgStMgr As DrawingStylesManager
Set DrgStMgr = oDocument.StylesManager
Dim ObjDfStyle As Style
Set ObjDfStyle = DrgStMgr.ActiveStandardStyle.ActiveObjectDefaults
MsgBox ObjDfStyle.Name
End Sub
Is it possible to change Active Object Defaults Style by VBA code (see picture below)?
I am trying to change Object Defaults in order to temporarily switch style which use layers with different line weights, and than switch it back. I am new to VBA so I am not sure if I am not trying to do something what is impossible.
Somewhere in Inventor to override the default size when creating holes? I need to change the size of 3 mm to 4.2 mm.
View 1 Replies View Related