I'm trying to sort a structured Bom View through .Net Api in Inventor 2012. I'm using Sort method of BOM View object. I don't get any error but BOM isn't changed after this call.
I've tried :
oBv.Sort("Item") or oBv.Sort("Item", False)
oBv.Sort("Part Number") or oBv.Sort("Part Number", False)
I am looking for a way to export the structured BOMview from Inventor to either Excel or Word. That’s all good and I can do that but I struggle to find a way to include “All Levels” of the structured BOM view. At the moment I use a “For Each item in BOMview” loop to cycle through the BOMView items.
I have also set the StructuredViewFirstLevelOnly property to False. The For Each loop does not pick up any items inside sub-assemblies.
What would be a nice way to drill down and get an item output like this:
1
2
2.1
2.1
3
4
5
5.1
5.2
Etc.
I want to place a "Parts Only" BOM view of my Parts List. In the Parts List dialoge box, when view or document is selected, BOM View grays out and defaults to "Structured". This issue is new to my work station and is not an issue to the other stations. Why? How can I fix?
View 5 Replies View RelatedIV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
what is the use of this tab???
and what is the difference between structured and model data?
I am iterating through a multi-level structured BOMView and checking to see if the component occurrences) corresponding to each BOMRow are visible or not. It seems that only assemblies (and sub-assemblies) have valid occurrences where I can check the Visible property. All parts are skipped (returns False). My code is below:
Private Function ItemIsVisible(ByRef bomRow As Inventor.BOMRow) As Boolean Try Dim cDef As ComponentDefinition Dim cOcc As Component Occurrence For Each cDef In bomRow.ComponentDefinitionsFor Each cOcc In cDef.Occurrences If cOcc.Visible Then Return True Next cOcc Next cDef Return False Catch ex As ExceptionReturn False End Try
I have a problem with Bill Of Materials in drawings.
I want to show a structured list of the top level components in this general arrangement. But whenever i select a view for inventor to create the table it only gives me to option for 'Components Only.'
I have edited the assembly and switched off the 'Components only' option in the IAM, but it still will only let me put a parts only BOM into the drawing. I have right clicked the node in the IDW browser and selected 'bill of materials' and here i have also switched off 'parts only' but still the same.
How do i get a top level BOM into my drawing?
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
i need a macro in VBA who export the structurated part list in xls separated by comme with only two cullom in order: Quantity and Part Number.
This .xls file mus be saved in the same folder where the .iam file is saved and with the same name of the .iam file. How to make this marco????
Is there a way to sort and view thumbnail view alphabetically
View 1 Replies View RelatedIn Photoshop 9 can I view or sort photos by time taken not just by date taken?
View 1 Replies View RelatedHow can I sort the files by filename in Media view in Elements Organizer 11?
I know I can do this in Windows Explorer, but it's important that I be able to do this in PSE, because I have a lot of files, and managing them is getting time-consuming.
Is it possible to sort all pictures view in library to have the oldest pix at the bottom, newest at the top, numbered upwards from the bottom?
View 9 Replies View RelatedI have been unable to find any code to sort the BOM, there are lots of snippets to sort and modify the Parts list.
How to sort the Assembly BOM?
Sort parameters:
PARTS Only
"BOM Structure"
then by
Custom Parameter "TYPE"
Then By
Part Number
Then "Renumber" starting at 1
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
I have an iLogic rule that populates the fields shown below in our title block. The DIM. Values are strings set with H,W,L values. This works well, but I have an additional need to sort these values in ascending order, so the smallest value is first followed by the next largest and finally the largest value. (4.000x5.000x14.000). I haven't had much luck finding any information about how this can be done. I did however come across some code here that someone else was using for a similar feature.
Dim sizes As New List (Of Decimal)sizes.Add(bH)sizes.Add(bW)sizes.Add(bL)sizes.Sort()D1 = sizes(1)D2 = sizes(2)D3 = sizes(3)
This is what I have been attempting, though it does not work. I get the following error "Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index". I'm not sure if my list type is correct (Decimal), but no matter what I choose it fails. The (bH,bW,bL) are the actual block dimensions pulled from the .ipt file. Once sorted I want the values of each position (1),(2),(3) to be assigned to (D1),(D2),(D3) so I can place them in my title block in the correct order.
Im working on something just now but ran into a problem when a new sheet is added after one that is excluded from count.
What i need is to re sort the sheets in the browser so the excluded ones go to the end. Im thinking i would need to loop through the browser nodes somehow but the skills elude me.
Is the alpha sort function available trough API ? It's located in Assembly tab, Productivity tools. I'd like to use it in a custom program instead of asking my customer to click on the button.
View 2 Replies View RelatedI work with Inventor 2011.
It is possible to sort Parameters (user parameters) by code (simulating a click on column header) ?
I have got some ilogic code that i have patched together to sort my parts list in inventor which works great but it will not update all sheets at the same time as when we design we have multiple sheets with parts list on and the odd one without.
add to this code to update all sheets partlists and also recognise that some sheets will not have partslists on so this will need to skip.
below is code that is used to sort
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
[Code] ...........
I need to sort the BOM (structured) while avoiding three parts. So I attempted manually locking the three parts in the BOM through the user interface and then running the following code
' Set a reference to the assembly document. ' This assumes an assembly document is active. Dim oDoc As AssemblyDocument oDoc = ThisApplication.ActiveDocument
' Set a reference to the BOM Dim oBOM As BOM oBOM = oDoc.ComponentDefinition.BOM
' Make sure that the structured view is enabled. 'Set a reference to the "Structured" BOMView Dim oBOMView As BOMView oBOMView = oBOM.BOMViews.Item("Structured")
'The following line works correctly Call oBOMView.Sort("Part Number",True) 'Re-Number the BOM Call oBOMView.Renumber(3, 1) 'Re-Sort Items 'Call oBOMView.Sort("Item",True)
The above code is bits and pieces that I have combined from the internet. The only problem with it is that sort works fine on some files while on others it skips a few e.g. 1,2,5,6,7......
Is there any way we can sort the BOM while avoiding all the locked parts.
I want to use iLogic to:
1.Sort an assembly BOM by Part Number.
2. Renumber Items in the BOM as sorted.
3. Sort a drawing Parts list by item number.
The background to my problem is that i have an assembly which is working beautifully turning components on and off (suppressing/activating in LOD reps) as defined by iLogic rules (iLogic is awesome). The problem is whenever a part is turned on/activated again, it shows up at the bottom of the BOM and Parts list out of order (would be nice if parts went back in the list where they came from).
Is there any sort of "Live Update" tool that Comes w/ Inventor 10 series? I have been to the "downloads" page at Autodesk site for Inventor 10, and have already installed sp3a, and a couple of the hotfixes (1054780 & 1057155) - I was trying to follow the dates and hotfix numbers in an effort to bring my product completely up to date, but now Inventor does not seem to be working correctly - I suspect that I did something in the wrong order. How can I know that my product is completely up-to-date, and is it possible to get a sequential list of SP's and Hotfixes so I know what order I'm supposed to install? I have also tried "repair" from the installation disk, but after "gathering all required information", nothing happens.
View 3 Replies View RelatedAlpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies View RelatedIs there any method to sort sketch blocks in a part file? All of our sketch blocks are numbered with a profile number. When we create a new multi-body assembly we will often derive 50-100 of them into the master file. It would be great if we could sort them by profile number.
The next best solution would be the ability to create sub-folders to place them in by type (sort of like assembly folders), but I'm pretty sure this isn't possible.
How do you sort(Resort) a hole table via code? The hole table does not appear to have a .Resort member.
I would think it would be oHoleTable.Resort.
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
i = MessageBox.Show("Do you wish to Renumber & Sort BOM?", "My iLogic Dialog", MessageBoxButtons.YesNo, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1) If i = vbyes ThenTrace.WriteLine ("INV - Transfer; User Selection; Do you wish to Renumber & Sort BOM? - YES")'Renumbers & Sort BOMoPartsList1.Renumber oPartsList1.SaveItemOverridesToBOMoPartsList1.Sort("ITEM") Trace.WriteLine ("INV-ExternalRule - Renumber & Sort BOM#")Else if i = vbno Trace.WriteLine ("INV - Transfer; User Selection; Do you wish to change Renumber & Sort BOM? - NO")End if
what i want to do, is renumber the BOM by (001) then go to part list and sort by item.
Having problems with the updated new file dialog and I'm not talking personal problems. I switched it to detail view and widened up the name column so I could see the whole name. I could actually live with that setup however the next time I opened the new file dialog all the columns returned to their default size and the sort also reverted.
Is it just me or does the new file dialog not remember any changes to it's layout?
Im currently converting some images to vector images They have asked can i provide them in a "layered structured illustrator file".
Im Relatively experienced with Illustrator and have never come across the term before im assuming they simply mean they want the ai. file with all the layers maintained?
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View Related