AutoCAD Inventor :: ILogic To Sort BOM?
May 22, 2012
I have been unable to find any code to sort the BOM, there are lots of snippets to sort and modify the Parts list.
How to sort the Assembly BOM?
Sort parameters:
PARTS Only
"BOM Structure"
then by
Custom Parameter "TYPE"
Then By
Part Number
Then "Renumber" starting at 1
Autodesk Product Design Suite Premium 2014 SP1 Build 222
Intel Core i7 (950@3.07GHz)
Windows 7x64 (Home) - 12GB Ram
Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
View 1 Replies
ADVERTISEMENT
Feb 20, 2013
I have an iLogic rule that populates the fields shown below in our title block. The DIM. Values are strings set with H,W,L values. This works well, but I have an additional need to sort these values in ascending order, so the smallest value is first followed by the next largest and finally the largest value. (4.000x5.000x14.000). I haven't had much luck finding any information about how this can be done. I did however come across some code here that someone else was using for a similar feature.
Dim sizes As New List (Of Decimal)sizes.Add(bH)sizes.Add(bW)sizes.Add(bL)sizes.Sort()D1 = sizes(1)D2 = sizes(2)D3 = sizes(3)
This is what I have been attempting, though it does not work. I get the following error "Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index". I'm not sure if my list type is correct (Decimal), but no matter what I choose it fails. The (bH,bW,bL) are the actual block dimensions pulled from the .ipt file. Once sorted I want the values of each position (1),(2),(3) to be assigned to (D1),(D2),(D3) so I can place them in my title block in the correct order.
View 3 Replies
View Related
Nov 7, 2011
I have got some ilogic code that i have patched together to sort my parts list in inventor which works great but it will not update all sheets at the same time as when we design we have multiple sheets with parts list on and the odd one without.
add to this code to update all sheets partlists and also recognise that some sheets will not have partslists on so this will need to skip.
below is code that is used to sort
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 4558 StartFragment: 314 EndFragment: 4526 StartSelection: 314 EndSelection: 314
[Code] ...........
View 4 Replies
View Related
Jun 13, 2011
I want to use iLogic to:
1.Sort an assembly BOM by Part Number.
2. Renumber Items in the BOM as sorted.
3. Sort a drawing Parts list by item number.
The background to my problem is that i have an assembly which is working beautifully turning components on and off (suppressing/activating in LOD reps) as defined by iLogic rules (iLogic is awesome). The problem is whenever a part is turned on/activated again, it shows up at the bottom of the BOM and Parts list out of order (would be nice if parts went back in the list where they came from).
View 7 Replies
View Related
May 15, 2013
i = MessageBox.Show("Do you wish to Renumber & Sort BOM?", "My iLogic Dialog", MessageBoxButtons.YesNo, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1) If i = vbyes ThenTrace.WriteLine ("INV - Transfer; User Selection; Do you wish to Renumber & Sort BOM? - YES")'Renumbers & Sort BOMoPartsList1.Renumber oPartsList1.SaveItemOverridesToBOMoPartsList1.Sort("ITEM") Trace.WriteLine ("INV-ExternalRule - Renumber & Sort BOM#")Else if i = vbno Trace.WriteLine ("INV - Transfer; User Selection; Do you wish to change Renumber & Sort BOM? - NO")End if
what i want to do, is renumber the BOM by (001) then go to part list and sort by item.
View 9 Replies
View Related
Aug 19, 2013
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies
View Related
Feb 13, 2012
I'm trying to sort a structured Bom View through .Net Api in Inventor 2012. I'm using Sort method of BOM View object. I don't get any error but BOM isn't changed after this call.
I've tried :
oBv.Sort("Item") or oBv.Sort("Item", False)
oBv.Sort("Part Number") or oBv.Sort("Part Number", False)
View 9 Replies
View Related
Feb 10, 2012
Im working on something just now but ran into a problem when a new sheet is added after one that is excluded from count.
What i need is to re sort the sheets in the browser so the excluded ones go to the end. Im thinking i would need to loop through the browser nodes somehow but the skills elude me.
View 1 Replies
View Related
Jun 4, 2013
Is the alpha sort function available trough API ? It's located in Assembly tab, Productivity tools. I'd like to use it in a custom program instead of asking my customer to click on the button.
View 2 Replies
View Related
Apr 10, 2013
I work with Inventor 2011.
It is possible to sort Parameters (user parameters) by code (simulating a click on column header) ?
View 3 Replies
View Related
Dec 3, 2012
I need to sort the BOM (structured) while avoiding three parts. So I attempted manually locking the three parts in the BOM through the user interface and then running the following code
' Set a reference to the assembly document. ' This assumes an assembly document is active. Dim oDoc As AssemblyDocument oDoc = ThisApplication.ActiveDocument
' Set a reference to the BOM Dim oBOM As BOM oBOM = oDoc.ComponentDefinition.BOM
' Make sure that the structured view is enabled. 'Set a reference to the "Structured" BOMView Dim oBOMView As BOMView oBOMView = oBOM.BOMViews.Item("Structured")
'The following line works correctly Call oBOMView.Sort("Part Number",True) 'Re-Number the BOM Call oBOMView.Renumber(3, 1) 'Re-Sort Items 'Call oBOMView.Sort("Item",True)
The above code is bits and pieces that I have combined from the internet. The only problem with it is that sort works fine on some files while on others it skips a few e.g. 1,2,5,6,7......
Is there any way we can sort the BOM while avoiding all the locked parts.
View 5 Replies
View Related
Jun 25, 2006
Is there any sort of "Live Update" tool that Comes w/ Inventor 10 series? I have been to the "downloads" page at Autodesk site for Inventor 10, and have already installed sp3a, and a couple of the hotfixes (1054780 & 1057155) - I was trying to follow the dates and hotfix numbers in an effort to bring my product completely up to date, but now Inventor does not seem to be working correctly - I suspect that I did something in the wrong order. How can I know that my product is completely up-to-date, and is it possible to get a sequential list of SP's and Hotfixes so I know what order I'm supposed to install? I have also tried "repair" from the installation disk, but after "gathering all required information", nothing happens.
View 3 Replies
View Related
Nov 17, 2012
Alpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies
View Related
Sep 17, 2012
Is there any method to sort sketch blocks in a part file? All of our sketch blocks are numbered with a profile number. When we create a new multi-body assembly we will often derive 50-100 of them into the master file. It would be great if we could sort them by profile number.
The next best solution would be the ability to create sub-folders to place them in by type (sort of like assembly folders), but I'm pretty sure this isn't possible.
View 1 Replies
View Related
Oct 8, 2013
How do you sort(Resort) a hole table via code? The hole table does not appear to have a .Resort member.
I would think it would be oHoleTable.Resort.
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
View 2 Replies
View Related
Aug 2, 2012
Having problems with the updated new file dialog and I'm not talking personal problems. I switched it to detail view and widened up the name column so I could see the whole name. I could actually live with that setup however the next time I opened the new file dialog all the columns returned to their default size and the sort also reverted.
Is it just me or does the new file dialog not remember any changes to it's layout?
View 2 Replies
View Related
Nov 5, 2013
I'm trying to use iLogic Design Copy to copy an assembly and all its associated parts to another directory. The assembly contains content center parts. Inventor warns me that the destination file of one of the CC parts (and 18 others) will be overwritten. When I go ahead and copy anyway, the copying process stops at that specific CC part. The Design Copy Progress dialog box states there is an error copying that CC part. When I close the Design Copy Progress dialog box, Inventor crashes.
The error copying the CC part: I'm allowed to use content center parts in iLogic Design Copied stuff, right? I searched some related topics and I'm under the impression that Inventor keeps the CC parts in its own directory and shouldn't be trying to overwrite them.
View 3 Replies
View Related
Nov 13, 2013
I am doing a tie rod the issue I have is when the length is between 2.001 and 2.250 we would drill thru all but only tap the ends .750 deep. If the part is 2.000 would would drill and tap thru in one step and not have to rotate the part in the lathe.
How do I get ilogic to understand if my number is between this 2.001 and 2.250 to lengthen the drill length parameter?Or add a mid plane cut? ( trying now code below reflects this try)
Not sure what way I want yet but I just can't seem to find a snippet or code to do this. I tried to add a list in the parameters for it to read but seems to do nothing.
If LENGTH <= "2" ThenFeature.IsActive("Thru_All") = TrueFeature.IsActive("Hole_A") = FalseFeature.IsActive("Hole_B") = FalseiProperties.Value("Project", "Description") = "RETURN ROLLER SHAFT, " & iProperties.Value("Custom", "DIAM") & " Ø S/S, TAP THRU 3/8-16, " & iProperties.Value("Custom", "LENGTH") & " LONG"ElseFeature.IsActive("Thru_All") = FalseFeature.IsActive("Hole_A") = TrueFeature.IsActive("Hole_B") = TrueiProperties.Value("Project", "Description") = "RETURN ROLLER SHAFT, " & iProperties.Value("Custom", "DIAM") & " Ø S/S, TAP BOTH ENDS 3/8-16, " & iProperties.Value("Custom", "LENGTH") & " LONG"End IfIf LENGTH = (My_List) ThenFeature.IsActive("Mid_Cut") = TrueElse Feature.IsActive("Mid_Cut") = FalseEnd If
View 2 Replies
View Related
Mar 8, 2011
Possible to run the 'import .xml structure' routine for an assembly BOM using either iLogic or VB?? I'm trying to replicate the Import button at the bottom of the BOM screen....
View 5 Replies
View Related
Jan 16, 2013
What I am trying to do is insert a part into an assembly file using iLogic. I basically want to mimic Inventor’s “Place” command using ilogic, maybe something like this:
oPath = ThisDoc.Path & ""
oFile = "File.ipt"
Component.Place(oPath & oFile, False)
View 1 Replies
View Related
Jun 20, 2013
This att. doc shows rule for exporting dxf out of drawing. It is working on one sheet just perfect. In multi sheets it save allways with same name. I want to choose from which sheet i need dxf but to be saved by sheet name or model properti name. Is that possible?
View 9 Replies
View Related
Aug 28, 2013
I have an external ilogic rule that creates a set of DWF drawings for all parts and subassemblies (as long as the idw files exist) within and including a main assembly.
I would like to merge all the DWF drawings of the sub assemblies and component parts into the DWF of the main assembly. Is there a method within DWFAddIn that will allow me to merge the files? Is there another way that I can merge the DWF files using the same ilogic rule (one rule to create and merge all DWF's together?)
View 3 Replies
View Related
Aug 9, 2012
I have closed profile "Sketch1" placed on one of the parts in Assembly.
Suggest iLogic code to create cut Extruson (Extents=All) based on the "Sketch1"
View 6 Replies
View Related
Jan 9, 2013
I´ve found some iLogic code to print a drawing to a PDF document. After some minor modifications it works just fine, but I would like to add some code which allows med to set PDF properties (such as "title", "author", etc.) with values from iProperties. How can I do that? Is it possible? (I'm new to iLogic).
View 6 Replies
View Related
Jul 12, 2013
I use simple set of iLogic rules to manage product configuration through the assembly LOD. Assembly is really simple not more then 30-50 parts. Still I manage to crush Inventor fairly often. Some days 5 and more crashes! Several times sent crash report to AutoDesk for no joy. Never got any feedback.
I am just getting an impression that Inventor does not like LOD manipulated with iLogic for some or the other reason.
View 5 Replies
View Related
Dec 19, 2011
I am slowly learning about ilogic, and have created parts and assemblies that are run by rules. My next question is, what exactly can ilogic do for drawings? I've looked at the wikihelp, but I am not a natural at programming and I need more than a list of functions with brief descriptions to get me started.
I'm looking for code snippets, other discussions, tips, tricks, and/or tutorials to get info what I can do with ilogic and the API that can automate parts of the drawing process.
View 2 Replies
View Related
Aug 22, 2012
I made a 3D model with ilogic to control features to be suppressed or compressed. Because there are lot of features need to do so (need almost 4 to 5 min.) , when I run the rules, it came "Rule timeout" issue as pictures.
I used:
Feature.IsActive (myFeature) = status
to control the feature be suppressed or unsuppressed .
View 8 Replies
View Related
Aug 1, 2012
I'm trying to get started with iLogic, but I have no coding background and no VBA experience in Inventor, so I'm looking for a good site or resource that explains iLogic and gives working examples.
View 3 Replies
View Related
Nov 30, 2012
When we create a manifold assembly we like to itemize each part individually. Meaning that if we have 5 valves that are the same, we show those as 5 separate items on the BOM. This makes for easier troubleshooting with a customer over the phone. Unfortunately there appears to be no way to manage this natively within Inventor, so we have to edit the BOM manually which defeats the whole idea of automated BOMs. I was hoping some code could come to the rescue. One thought I had was to export the BOM to excel and then have some automation within excel to re-number and sort the BOM, once complete import it back into Inventor in a table.
View 7 Replies
View Related
Jan 14, 2011
I have problems to export dwf with ilogic
I use parts of the snippets than ships with inventor, but I can not export the 2d and 3d in the same dwf.
Perhaps it might have something to do with that when I export a 2d file the traditional way only 2d gets exported to the dwf if i dont open the tab that lets you choose 2d and 3d model.
Even if i have the 3d model checked i have to open the tab to get both 2d and 3d, if i dont open the tab only 2d
Here is the code.
path_and_name = ThisDoc.PathAndFileName(False)
DWFAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD95-2F4D-42CE-8BE0-8AEA580399E4}")
oDocument = ThisApplication.ActiveDocument
oContext = ThisApplication.TransientObjects.CreateTranslationContext
oContext.Type = IOMechanismEnum.kFileBrowseIOMechanism
[code]......
View 4 Replies
View Related
Oct 19, 2012
I want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
View 9 Replies
View Related
