I created a seemingly simple contour flange, and cut away a 890" radius. However, when I try to create the flat pattern, it gives me the message:
440-006.ipt: Errors occurred during update
440-006.ipt (Flat Pattern): Errors occurred during update
Definition1: Could not build this FlatPattern
The attempted operation did not produce a meaningful result. Try with different inputs.
I made a sketch for a bracket and used sheetmetal/contour flanges tool to make solid.I had to use 2 contour flanges to get the shape as i could not get it to work with 1 contour flange.Is this not possible due to something wrong with my sketch?
Other question is have i used the Cut tool correctly for the cut out of the brackets?
Inventor 2012
I'm having no problems creating the contour roll, but it won't let me add flanges to the outside edges. I have attached a file that shows the measurements that I want. I need to be able to create a flat pattern. The material thickness is .1046" and 3" deep.
View 1 Replies View RelatedI made this sheet metal part, selected the arc sketch and the perpendicular edge like in the picture, but the contour flange isn't created
View 7 Replies View RelatedI have sketched a fan casing which consists of a series of tangential arcs. The sketch is fully defined but when I try to use "Contour Flange" I get the following error:
Sheet Metal: Contour Flange Creation failed.
19-3-101-26-2.ipt: Errors occurred during update
The attempted operation did not produce a meaningful result. Try with different inputs.
Try decreasing bend radius
Feature Compute failed.
My guess is the end points of the arcs are not defined correctly but I do not know how to fix. I have attached the file.
I am working with settings for dxf sheetmetal Inv 2011..If the configuration is set to ( configuration not saved) if I change the file version to eks. R12 it doesn't remember the changes, like in drawing only if I configure a ini file.
If I configurate a ini fil, it seems that the layer is saved in the ini file what do flatpattern.xml ? I have trying to change a layer name in the flatpattern.xml it does not work.what is the best practice for flatpattern setting.
Do I NEED to use the DataIO to export the flatpattern to dxf, or is there some way I can pas a Flatpattern to the DXFAddIn.saveCopyAs()?How do I pas the .ini file to the DataIO.WriteDataToFile().Do I need to write my own parser to get the Format correct?
View 3 Replies View Relatedway to create an outline contour cut for decals? Iv'e been doing this for years and it's been a headache. I have the graphic/text, duplicate it with a thick outline. Say .25". Then Convert Outline To Object. The problem I have is that if it's a complexe graphic or line of text, a number (sometimes a large number) of the nodes are broken and I have to join them. And CD sometimes adds way too many nodes. So I have to spend a long time deleting unnessesary nodes to clean it up.
Iv'e had people suggest to use the Arrange, Shaping, Boundery function. But that doesn't allow me to make the boundery any further away from the art.
When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedI am trying to build a spiral staircase and need to use spline to build the railings. Every time I try to end the spline by hitting enter the spline disappears. I am using 2014, and I have never had this problem before with previous versions.
View 8 Replies View RelatedWhat I have is a bracket that sits on a pitched roof (ipt attached). The part was set up to reflect the positioning. On the lower side of the pitch, the easiest thing was to scuplt the flanges to the slope. Although the flat pattern results in some edges not being perpendicular to the face (See image). These show on the drawing. I realize you can remove these in the drawing but it would be nice to not worry about it.
What would be a better way of handling this situation?
2010 Suite-SP4 64bit
I am working on a bin type unit, and am having trouble creating a flange, I am creating the bin in the final product stage, then I will separate into manufacturer components. I am having trouble adding this flange around the top 4 edges of the bin. I need the four corners to meet on a miter 45. I will then rip down each seam and have 4 separate panels.
Is this a bad workflow? Is there a better route? I attached the part in Inventor 2013 format,
I created this flange and I need to cut it from the extruded tube, but I'm having some trouble.
View 2 Replies View RelatedI am trying to make a way that suppress the flange features of all the panels that will be insert in the assembly so i can suppress all the features at ones in a assembly and don't have to do that for each panel separately.
I have a assembly with parameters and i have a part with no geometry but have linked the parameters from the assembly. In my panel part i link the parameters to the part with no geometry.
When i use the parameter in the assembly to suppress the flanges that works the way i want it. But when i insert the panel part into that assembly it doesnot work.
I am trying to create a sheetmetal part and flat pattern of a 72" radius section with 3" split flange top and bottom.I have searched the Discussion Group and several other sites with no results.
View 2 Replies View RelatedIs Inventor able to provide information about the bending angle of a lofted pieces ?
I'm trying to loft a piece from square to circle. The bender ask me what is the angle of this pieces.
I have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedI would like to know if there is a way to have the Schedule as an I-Part parameter of a flange. I'm trying to create a custom flange for use in the content center and would like both size and ID to be picked from a drop down when placed into an assembly.
Since it's a flange not a pipe I can't use the standard tube & pipe authoring method.
I'm trying to make this part on Sheet Metal, and I have to offset this flange at 28 degree that meet 0.37". The thickness is 0.12". Currently, the only method that I know how to meet that 0.37" is by playing around (guess and check) with the number in picture 3. Any other methods to create this offset part.
Inventor 2011
Window 7, 64bits
I tried to create a overlap flange in sheet metal, but the result is not what I want as I cannot select the gap edge near the circle portion. I attached the file here.
View 3 Replies View Related1) I have assembly containing pipe and a flange. I want flange size to correspond pipe size. In other words, when parametrically change pipe size, flange size to be updated automatically. ( do i need to have two parts - pipe and flange, or it can be one assembly without need to create parts?)
2) Is it possible to control type of flange (slip-on, weld-neck.. etc) by parameters or need to make different assemblies for different flange type?
3) Then when flange and pipe sizes are updated would like to make overall length of that assembly whole number (since hub length changes with the flange size). how to round that overall length to integer?
how I can combine the bend function & flange in an animation. The problem is that I'm unable to use flange when the plate is nearly 98% flat (which I need to remain the radius for favorite parameters - bend function).
View 9 Replies View RelatedI am currently working with an elliptic profile that needs to be unfolded. The part consists of two sketches, with each sketch having two ellipses. The ellipses on each sketch then forms a cross-section where the thickness of it is supposed to be 8 mm (the first ellipse is offsett).
My plan is then to generate a mold for the inner and outer sides of this part by using the "Lofted flange" function and Rip, since I want the flat pattern of it. However, I've found that I can not select my offset ellipse when using Lofted flange, only the original one. I'm thinking that this might be caused due to the offset ellipse not actually being an ellipse but a spline (I read somewhere that there are two ways of offsetting an ellipse. One generates a mathematical ellipse and the other a spline). Creating an new ellipse and then saying that the a and b distance should be 8 mm less than the other ellipse will work, but that will not give me a constant wall thickness of 8 mm along the circumference of the elliptic cross-section.
What's the best way to populate the studs and nuts on a flanged connection in tube/pipe? Can studs be added to the bolted connection content?
2010 Routed SystemsInventor Professional 2014 Build 222
Dell Precision T3500, Intel Xeon W3550 3.07 GHz, 12GB RAM, Win7 SP1
Is this a bug in sheet metal?
I pick an edge to create a Flange feature and the Flange is longer than the edge. (Flange4 in the file)
I am trying to make a punch tool in inventor for sheet metal. I noticed that for the features I could not select faces or flanges I did. I know you can extrude the same shape to get the same result but I wanted to use a face/flange so that I can retain the flat development. What is the best way around this.
To get a sense of what I am trying to make:
-square cut out
-on the bottom edge of the square I made a face that is angled at 45 degrees
It would be closest to a louver tool.
Is there an easy way to flange so that the flat pattern comes out with the two sides' faces are parallel to each other? I have attached the part I am trying to work with.
View 1 Replies View RelatedI have a sheet metal part where I selected an incorrect edge when creating flanges, is there an easy way to deselect the edge? I can add edges and I can select the glyph for a specific edge to edit it, but short of deleating the feature and starting over I have not found a good way of deselecting an edge.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
How can I define the length of a flange in a sheet metal part? In other words, I would like a flange to run a definitive length along the edge of a part, not the entire edge of a part.
View 1 Replies View RelatedI have a problem doing a flange in a sheet metal.
I've attached a picture and the file for whoever.
inventor 2011
vault pro 2012
I would like to ask any support to how can I solve the problem I have to face.
I have a metal sheet part. In the middle of it there is a square shape cutting.
I would like to create a flange to get the final flat pattern as you can see in the attached file nemed "flat pattern.png".
