I'm trying to 'export face as' and change the version of the DXF, but my options box will not come up. This problem is also happening in my 'Save Copy As' and 'Export to DWG'.
View 4 RepliesMy company outputs IGES files and we always use the settings "Surfaces" and "144-Trimmed", however, the default for Sufrace Type is "143-Bounded" so we have to open up the options dialog box and change to "144-Trimmed" every time. How can I set Inventor's Default to "144-Trimmed" so I never have to mess with it again?
View 6 Replies View RelatedWhen I "save copy as" dwg an IDw, I have an error with some ellips.
from IV 2013 to Autocad Mechanical.
Is it solve with IV 2014?
I have some problem with converting to PDF from Inventor .idw file. When I use “Save copy as” PDF I get some picture like this
But if I use command "Print" and choose “DragToPDF” or else, picture came out just fine.
Problem is that I have some programming tool where I need to use “Save copy as”
P.S.You can see differences in attachments.
I have a user who no longer has a pdf option when "saving copy as" in Inventor 2010. He sees a few other options but not pdf. I will get him to perform a fix and reboot?
View 9 Replies View RelatedWhen trying to Save Copy As:
1) When setting file type to AutoCAD dwg or dxf, Inventor has to "think" for about 30 - 45 seconds (i.e. the hourglass cursor shows up).
2) I press 'Options and Inventor "thinks" for about 30-45 seconds, but nothing happens, no DXF export wizard pops up, so I can't change any export settings..
3) If I press save anyway, I get an error message: "problems encountered while saving the document" I have tried repairing, reinstalling, and uninstalling inventor but each option fails.
When I save as DXF, I have to manually go into options on the save tab and click "default DXF configuration," otherwise it exports the file as a ZIP folder. I can't figure out how to save the configuration so I dont have to manually do that everytime, im sure it something simple, as it usually is..
View 2 Replies View Relatedi have an asm1 that i would like to copy as asm2. identical most of the part except for some parts that i have to replace and use other parts from asm3.
Which is the best method to use, copy design or save as?
I used to be able to save my .idw files as an autocad .dwg, then be able to open and edit them in autocard. Now it seems that I can only save as inventor dwg and I am unable to edit the drawing in autocad.
View 9 Replies View RelatedI recently installed Inventor 2014. With Inventor 2013, I was able to do a Save Copy As on an IDW file to save it as either a DXF file or AutoCAD DWG file without any issues. In Inventor 2014, doing this produces the following dialog boxes in succession:
No DXF or DWG is produced. I tried doing this to a new, blank drawing from one of the default IDW templates and I get the same result. What can I do to fix this?
I have a part (partA) and a drawing of it (drawingA).I want to save a copy of both (partB and drawingB) and make changes to partB and drawingB will update.
To do this do I save a copy of partA first to partB and then in drawingA replace part to partB and then save a copy of drawing to drawingB
It has to do with iparts and iassemblies and “save copy as”. My concern is that during the concept stage an engineer may be working on a design and will create an ipart, as many of our designs have multiple versions. They now want to keep a copy of that ipart, and try something new so they “save copy as” and create a new file. The new ipart members all have the name reference to the first design. Does renaming those members redirect the path to the new ipart, or should we avoid designing like this all together?
View 5 Replies View RelatedRecently upgraded from 2008 to 2013 (AC&IV) and now having the issue shown in the two attachments. Some of the leader text w/ iProps that had additional text added come thru ok, but straight iProps don't.
View 1 Replies View Related"save copy as" is no longer working as is "save as", what happened?
View 7 Replies View RelatedI am having a problem with Save AS Copy To DXF.
When I try the 'Save copy as' DXF route it does not function. If I click the save button nothing happens and if I click the option button nothing happens either. In 2012 when you click the options button you would have got the option to change the export settings i.e. all sheets etc...
I do have the option to change the file formats via the drop down box in the 'save copy as' dialogue box and dxf etc are listed!
When I right click on the flat pattern in 'Model' there is no button for 'Export' in the list that appears. Therefore I cannot get to the Flat pattern dxf export options prompt as shown in this thread.
Its obvious you should be able to save as a dxf from an inventor idw as the buttons are there they are just not working!
I am having this problem with Autodesk Design Suite Premium. Inventor 2014 will not give me options, and is having problem exporting to autocad dwg. tried a reinstall as it appears to wotk properly on other similar installed machines.
I have an assembly that I am working on that will be used as a configurator, driven by I-logic. Everything is work fine but there is one part off the assembly that will be custom to each new assembly. Is there a way to use I logic to open the ipt file save it as copy with different name and replace the original in the assembly. I know this can be done manual through the productivity tab within the assembly environment, but I am trying to automate the process so the end user will just have to follow prompts that will be given by i-logic.
View 4 Replies View RelatedI have re-installed APDS Ultimate 2013 onto a new computer and am having some issues setting up my styles and etc...for the most part I have been working on it as I go with no issues...but I can't remember how I set up my export to dxf settings before. I think I just used the default settings, I exported to dxf from the idw environment by saving copy as and selecting dxf from drop down menu and selecting something like AutoCAD 2004. This has worked before and still does now, but the problem is the dxf's that are exported are huge. The drawing is of a single tiny part with basic geometry. The picture below shows the size difference between the files.
how I can make it a normal size, I don't really care about the size of the dxf except for the fact that I can't email it because we have a limit of 10MB.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I was able to use Inventor "Save Copy As" function to create zgl files. When the zgl files were viewed with "Imagination View" program, some files looked good, while some others do not show any geometry (just white background). Do I need to change anything in the Model before executing "Save Copy As" function?
View 3 Replies View RelatedI am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
View 3 Replies View RelatedAn application that will let me choose a group of Drawing files (.idw) and perform "Save Copy As" to a PDF format on them. The Filename of each Drawing should be extracted from a custom Parameter I embeded in the IDW file.
I know I can use the Task Manager with a virtual PDF Printer to create these files, but then the PDF Filename will equal the IDW Filename, and I want it to be derived from the custom parameter I prepared inside the drawings.
When using save copy as to make an identical part with a different number, the file name in the top and the browser doesn't update to the new filenumber. only in the bottom file tabs is the name correct. if I go to file> save as I can also see the new filename. This is a hassle when doing this to multiple files in an assembly, as it makes it hard to keep track of which parts have been given a new name. It seems the filename input in the browser is only written once, and that is when the first file was saved for the first time.
View 7 Replies View RelatedUsing Inventor 2012 and using ilogic rule or VB codes to auto Save Copy AS DWG?
My old code error out when debugging. The exact error is on this code line:
DWGAddIn.SaveCopyAs(oDocument, oContext, oOptions, oDataMedium)
Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.
I cant't save copy as PDF when I point to a nework location, It's working when I save directly on my computer.
I get a message saying : "Failed to publish DWF file."
I am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
I am having trouble with copy paste . When I copy with base point, and try to paste all the paste options are inactive. is there a switch that I have off? What''s the fix.
View 4 Replies View RelatedI am adobe creative cloud Photoshop cs 6 register user iam not getting COPY CSS options even i have updated Photoshop several times . still not getting this options.
View 4 Replies View RelatedI never had problems with LR4, but am now having export problems with 4.1
Mac Pro with 10.6.8 (Snow Leopard)
LR 4.1 RC
CS 5.5 with ACR 6.7
When exporting an image into the External Editor for Nik Color Efex Pro I get the Warning Dialogue (cool) but when I click the tab (to read more) "Copy File Options", it keeps reverting to sRGB as opposed to "ProPhoto RGB" (my desired Space) and something I keep resetting in Preferences> External Editors>Nik... Why???
I'm hoping this will serve as a warning to other professionals to click that tab tpo make sure you are working in "ProPhoto" if that is what you desire. Because once the information is gone, well.....
I repeat that this was not a problem with LR4 and I was having NO problems with my External Editors. So from my computer, my standpoint, a bug has been Introduced.
I have the following function that opens the File "Save As" dialog box. It gets fed a drawing number and allows the users to browse to a folder where they want to save it. The problem is when a file already exists with the same name. A message box pops up letting the user know that the file already exists and do they want to overwrite it. The can pick yes to overwrite, but it doesn't really overwrite the old file, it seems like it opens it and then crashes when the rest of the program tries to run.
What I want to do is create a loop to determine if the file already exists. If it does not exist, then save the path and drawing name as usual.
If the drawing exists, I want to pop up a dialog giving two options; Overwrite, or Rename the current drawing. If they pick Overwrite, I can have the program delete the old existing drawing and then just save this one. If they pick Rename it will loop back to the "Save As" dialog giving the user the ability to change their drawing name (like add a "-1" to it.
Public Function GetFilePathAndName(ByVal dwgNumber) podDWG = ApplicationServices.Application.DocumentManager.MdiActiveDocument podDB = podDWG.Database podEd = podDWG.Editor podPSO.InitialDirectory = "W:Work_in_Process" podPSO.InitialFileName = dwgNumber podPSO.Filter = "AutoCAD DWG Files|*.dwg" podPFR = podEd.GetFileNameForSave(podPSO) Select Case podPFR.Status Case EditorInput.PromptStatus.OK SaveDwgName = podPFR.StringResult Case EditorInput.PromptStatus.Cancel MsgBox("User Cancelled.") End Select Return SaveDwgName End Function
In PS CS4In my layers palette, I used to be able to have an effect (ex. drop shadow) on a layer & drag that effect onto another layer so the layers would have the exact same effect.In CS4 when I drag an effect, I lose that effect from that layer & it is put on the layer I dragged it to only. It will not let me copy it anymore.Is there some key I should be holding down now?I am wondering what else I will be running into with CS4. Maybe that wizard will pop out & yell at me.
View 1 Replies View RelatedI get an error now after instaling Inventor 2012 when I am using 2011( because of a project with other users I am on).
I get this error.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
I am using VB.net to generate a custom table in my .idw files to make a plot stamp. The table is showing up, however, the text is garbled. When you open the .idw, the table properties show the text correctly but the display is coming out messed up. I have attached a picture of what each looks like. I moved the table off the sheet for clarity.
The
Public Sub PlotStamp()
Dim oDrawDoc As DrawingDocument
oDrawDoc = _invApp.ActiveDocument
Dim oInvSheet As Sheet
oInvSheet = oDrawDoc.ActiveSheet
Dim oTitles_Plot(0) As String
oTitles_Plot(0) = CurrentFilename
[Code]...