When we do DWG we may have more than one Assembly on one individual DWG. When going to put the weights on the DWG through the text/Physical Property insert yadayada it keeps referring back to the original assembly. Even after changing which component we want the info to be drawn from, it refers back to the original? Are we not doing this right? Program glitch?
View 3 RepliesI am having a problem getting my the line weights to upate when I re-load a Revit Detail component back into a project file. The item on the left is the detail component in the family editor and the image on the right is the detail component.
There are no overides set in the visibility setting for detail items-> [name of the line work], however, when I do overide the line weight in the view for the line work, it doe change.
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
II need a way to tell if a component occurence is a virtual component.
I'm using a For Each loop to cycle through all of the components in an assembly, and if the component is itself an assembly to set the LOD to "Custom". I'm using the definition document descriptor object for this. It all woks fine until the loop comes across a virtual component which doesn't have a definition document, so I need a way to check if the component is virtual and needs to be skipped.Here's the
Option ExplicitImports Inventor.LevelOfDetailEnumSub MainiLogicVb.UpdateWhenDone = TrueDim doc As AssemblyDocumentDim oLOD As LevelOfDetailRepresentationDim oAsmCompDef As ComponentDefinitionDim oComp As ComponentOccurrenceDim oComps As ComponentOccurrencesdoc = ThisDoc.DocumentIf.
[code]....
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI have an assembly which has a few components suppressed.
My end results is another copy of the assembly (with copies of the all the parts) in another directory
Now i am able to create copies of un-suppressed parts using; (this allows me to SaveAs assembly components which are not suppressed)
DocumentsEnumerator = ThisDoc.Document.AllReferencedDocuments
And save a copy of the assembly using
ThisDoc.Document.SaveAs
I also added the fllowing snippet (which I am not sure what is does), but it does not work for me
Component.SkipDocumentSave = true
When I open the newly created assembly, I still see the suppressed components in the model browser
I want to either;
Skip saving the of the components in the model browser (i.e. the Assembly)
OR
Delete the suppressed parts in the Assembly, so that they do not save altogether
For some reason when I use my Paint Skin weights tool, the mesh does not go into a grey scale type shader. Instead, the textured model is still displayed instead of the black and doesn't display weight values in the greyscale I'm used to.
Did I mess up settings somewhere? I know I'm in Paint Skin Weights tool because I can see the bones when it goes into Xray. I can open other scene files and can view the weights just fine.
Note: I have tried the following fixes: copied the mesh into a new scene, made sure it wasn't a subdiv shape.
I am using Maya 2010
When i select my mesh and click paint weights i get this error:
// Error: file: D:/Program Files/Autodesk/Maya2012/scripts/others/skinClusterInflMenu.mel line 568: No object matches name: LeftLung.liw //
LeftLung is a joint and i figure liw is "Lock Influence Weights".
I can change settings in the tool and then go to paint and it is a red x through a red circle. When i click to paint it resets all settings in the tool and logs absolutely nothing to the script editor, even with Echo All Commands on.
This leads to the next problem, locking weights is doing nothing at all. Locking them by selecting the joint or using the component editor shows them as "on" but it does not actually lock in any way. Putting influence to any other joint will remove/change the influence on the locked joints.
It it possible to create a design spec table so that it can import the weight from the model and display it in both kg and lbs?
View 5 Replies View RelatedI have a FrameGen BOM setup as desired and added the column for Mass/lbmass to get the weight. However on those rows where there are multiples of the Item QTY (2 of this, 3 of that) the Mass shows just the weight of one item rather than the combined weight...which is what I want. I tried making a custom property call WEIGHT and entering an expression, but in that selection I do have mass but not Item QTY as a selection.
View 1 Replies View RelatedI just had Inventor 2010 reinstalled on a new workstation with Windows 7. On any new drawings my line weights are fine.
On any drawings created before the new install, the line weights are all the wrong thicknesses now when I open them on my machine. They used to be fine and to our company standard.
How do I get it to where my line weights are correct on all idw drawings.
I am working on a new concept design for one of our customers. A critical design parameter is the weight of each of several sub-assemblies.
I have an idw of the top level assembly where I have added Parts Lists of each of the critical subs to show the weight of the components used in each sub assembly. I would like to add a line at the bottom of each Parts List that shows the total weight of that sub assembly. I would also like the header of the Parts List to display the Part Number (from the sub assembly iprops).
Is there a way to get why I want from IV? I am currently using IV 2012. I have attached a .pdf mockup of what I want.
My current code consists of a simple line to save my .idw that is produced as a .PDF.
_invApp.ActiveDocument.SaveAs(CurrentDirectory &"Submittal_Sheet_0" & drawing_count & ".pdf", True)
Within Inventor, if you select Export --> PDF, you can select an option that disregards the lineweights set in the drawing. How to set it up in VB to do that?
how to set the line weights in my idw to be thin? They seem to have changed to thick lines and it's a task to keep changing them through the layers etc
View 3 Replies View RelatedI'm doing a parts manual and would like to have a heavier perimeter line weight around each of my parts or sub assemblies. I know I can manually change the line weights however some lines that make up part of the perimeter also run into my part or assembly so this doesn't really work. Is there a way to get inventor to do it automatically?
I'm running inventor 2012, and generating a .dwg file from an .ipn.
What controls the line weight in idw drawings in Inventor 13? If I zoom in on a section the line gets wider as I zoom in until it looks like a pdf drawing. I don't have this issue with Inventor 12.
View 1 Replies View RelatedIs it possible to select a group of parts in an assembly and then see the weight of just these parts or the centre of gravity of the selected group?
View 7 Replies View RelatedIs there a way to increase the edge weights/color of a part/assembly?
To see what I mean I attached a screenshot of a simple cylinder with the view set to shading with edges. Yeah the edges are there, but I'd really like them to stand out more.
Currently I cannot print line weights with the "best fit" scale option selected.
Scale options of:
model 1:1 (w/o tiling) ,custom (above .7 scale), & current window all seem to scale the lineweight correctly. But the output is not limited to the sheet edges
IDW line weights display correctly within Inventor (2013) drawing environment
The behavior is the same across all printers on my system, including PDF & from the "export to PDF" option.
It seems any scale value smaller than .7 will zap the line weights from the preview as well as the hardcopy
I know this option makes all lines the same thickness when printing, but where can i modify this "global" thickness.
View 7 Replies View RelatedI have placed my assembly onto the idw and the line weight is set up correct for the majority of the drawing, but the small details, line less than 1mm together still carry the same line weight as the rest of the drawing. They are coming out far too thick as one big fat line.
Is there a way (Automatically, not RHM change layer) to select lines that are close together to move to a different layer that has a different line weight? I dont really want to go around selecting every line close together and changing the layer or weight do I?
I have an iLogic controlled assembly with sub assemblies that are also iLogic controlled. The main assembly calculates some lengths and turns some subs on and off and then updates all the subs. The subs also calculate some lengths and turn some parts on and off. I have a rule in both the main assembly and copies in the subs that control the LOD to make sure that it's set to custom before anything else runs.
Now I may be misunderstanding something, but it appears that it's possible to have a sub assembly set to one LOD but be referenced in a top level assembly as a different LOD. In other words I have a sub that shows in the top level browser as Master. If I open this sub and set it from within the sub to custom LOD and switch back to the top level assembly it is still set to master there. It appears that this is what my LOD rule is also doing, setting it to custom in the sub but not changing the top level reference.
What I am trying to do is insert a part into an assembly file using iLogic. I basically want to mimic Inventor’s “Place” command using ilogic, maybe something like this:
oPath = ThisDoc.Path & ""
oFile = "File.ipt"
Component.Place(oPath & oFile, False)
My office procedures dictate that when we place a content center part that we do so "as custom" for several reasons that are irrelevant to this question (I can expound if needed).
My question is: If I have an assembly with a content center part that is placed "as custom" and I use the component replace tool (CTRL+h) to replace it with another content center part that has already been created and placed "as custom" in another file, how come I get a new CC component that is not the one I selected?
It appears that I am getting a CC part from the same family as the original when what I need is the component to be replaced with the one I am selecting.
In other words: when I say replace "this" with "that", how come I get something else entirely? This functionality works perfectly on non-CC parts.
I have an assembly which has components mated to a radial surface, I need to locate the center of a round slot against an axis, I have X Y coordinates, how can I constrain that part to those X Y coordinates?
Attached is a picture of the assembly.
I'm using replace on a sub assembly but want to write a parameter change to all the parts in the sub assembly as & when they appear.
An error occurs when I try to write a parameter to a part which isn't in the sub assembly - makes sense but how do work around this?
First try was this:
If Component.IsActive("SS_12.5mm Insln:1") = True Then Parameter("SS_12.5mm Insln:1", "Material") = Insulation
but "SS_12.5mm Insln:1" isn't here (by design) - I want a Component.Exists type comand - possible?
To be able to folderize component patterns seems to have been surpassed once again in release 2012. However, I am wondering if this is a setting issue yet I cannot find settings for what can and cannot be placed in folders, if they exist. And I wonder if it is a setting issue because during a training class I visibly watched the trainer place component patterns into a folder and once I still cannot do so.
View 9 Replies View RelatedHow to apply forces to a component who is spinning. More specific i am interested in the centrifugal loads distributed over the component.
Take an inducer wheel for a turbocharger. It is a complicated component and very difficult to calculate by hand. it is spinning with high revs, and the rev limit it set by the centrifugal forces acting.
I made a new positional representation (maybe it's connected, i don't know), and removed all the constraints from a part, but still can't move it.
It has other parts connected with it, and bolt, but i think i removed the governing constraint, but, cannot move it.
It's an assembly of about 5 parts, should i zip and attach it?
I have a sheetmetal assembly with helical shaped parts. I need to place about 50 little brackets and some corresponding rollers along the length of these helical pieces. The spacing is even so a pattern would be perfect, except I don't know how to get it to follow the shape of the part. The brackets are located to slots in the helical parts which were made with a rectangular pattern in the unfolded state. I tried to do a "feature pattern select" but it only saw the rectangular pattern as it is in the unfolded state (a straight line). I then gave up on patterns and started working on manually mating them into place but realized that the geometry of the slot was distorted (theory) and didn't leave me with any useable surfaces.
View 9 Replies View RelatedI've just upgraded from 2011 to 2013 and come across this problem.
In 2011 I could edit a component from the top level anywhere in the tree - i.e. From an iLogic rule in the top level, I could edit a component in a subassembly.
This doesn't seem to work in 2013 - I can only edit the first child of a component.
In 2011 I could simply use :
compo = Component.InventorComponent("TOP")compo.Edit