AutoCAD Inventor :: Color Parts In IDW Drawings
Jun 26, 2013
We use to color components in idw drawings very often. And when we have drawings of large assemblies we lose a lot of time for that. Usually we select the parts from views (having "Part Priority" in Filter Selection), right click and from the properties we change the color.
I was thinking if there could be faster ways to do it. For example to create a command (which later should accessed via a button on keyboard) that will call the colors window in the components properties, having the part already selected.
Probably I need a .vba code or an ilogic rule to create this command.
View 2 Replies
ADVERTISEMENT
Oct 2, 2013
Having inserted a parts list into my idw drawing i noticed that one of the column widths need to be increased,i went to the edit parts list style and increased the column width,saved it etc.
I expected the column width to increase automatically but it did not.One way i have found to do this is to reload the parts list,but surely this is not the answer.
View 6 Replies
View Related
Dec 11, 2012
Is it possible to plot (or print) all sub assemblies or parts drawings into separate pages by code?
I do not want to open and print every parts. One code and print all... Is it possible?
View 6 Replies
View Related
Jan 8, 2009
Been using Inventor from day one, never had a problem turning off the visibility of parts in darwing views till now.I cant hide parts in IDWs anymore.
* Select set to "Part Priority"... right click on a line in a drawing view... and "Visiblity" is grayed out.
* Browser Bar... find view of assembly, right click on a part.... and "Visiblity" is grayed out.
View 9 Replies
View Related
Oct 25, 2012
I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
View 3 Replies
View Related
Jun 17, 2012
How can you force the geometry of reference parts to print behind to print behind your visible parts. I have my reference parts print out on a light gray layer to be shown indistinct on a drawings, but it prints over my object lines in effect hiding them. This is even true if a reference part is hidden. Then hidden line will print over the object lines as well.
View 4 Replies
View Related
Dec 27, 2013
In the iProperties, in the Mass properties are the coordinates of the center of gravity. i guess they relate to the center point and axes in the main origin folder, right?
How can i show and measure from the genter of gravity symbol in parts and drawings?
View 5 Replies
View Related
Nov 12, 2012
I have several parts which I wish to modify, but, those modifications are only being done to get some prototypes made. I do not want the changed (non-approved part) to be used in current issue drawings, assemblies etc. until I have proven the modifications and am happy with them.
I can do this by doing a save as on the part and could just replace the previous design, but then I lose the history of changes/revisions shown in Vault which is critical to me and part of using vault in the first place.
View 3 Replies
View Related
Mar 14, 2013
I'm not sure if there's a way to stop this, but whenever I add parts to an assembly and switch to the drawing of the assembly, the hidden lines for those parts show up in every view of the assembly. Right now I'm having to go to each view and select the hide hidden lines option for each part. Is it possible to stop the hidden lines from showing up everytime I add a part?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 7 Replies
View Related
Mar 12, 2013
I'm having issues with parts that were drawn in 2012 being a different color in 2013. It's the same color just a noticeably different shade. Not all parts have this color difference.
It only does this on certain parts so I when I have a bunch of the same parts mated together in an assembly it renders out with different shades and looks goofy.
See pic attached - All piping is Dark Grey in color - The verticals right below the top valves are a different shade - When I check both colors in the part files they are listed as Dark Grey.
View 9 Replies
View Related
Dec 23, 2012
Inventor pro 2013 - how do I change the color of a part.Inventor 2012 had a menu called Color Override that I can't find now.
View 6 Replies
View Related
Oct 14, 2011
I have a large assembly model made of many different parts. The last thing I want to do is "paint" it so I can make a drawing showing the different colors being used. My plan is to take the entire assembly and insert it into another assembly then just change the parts to the specific colors. I was wondering if there was a way to change the colors on multiple parts at once. Right now I right click the part go to iproperties and then go to occurence and choose the specific color. I know from using Solidworks that it works the opposite you click the color first and then all the parts that you want to be that color. It works out a lot quicker. If I select multiple parts the occurence tab in the properties is greyed out.
View 4 Replies
View Related
Aug 29, 2012
I am trying to add color to my content center parts. For example I want all M10 hex head bolts to be red and all M12 hex heads to be blue.
I have My library configured in content center and I take from the "Inventor ANSI" catalog the "Heavy Hex Bolt -Metric" and right click and copy to my library. I switch the sort back to merged view and right click on the "Heavy Hex Bolt - Metric" and select family table. I scroll to the end of the table and insert a new column and set the "Column Name" To "Color" and set the "Column Caption" to "Color" , "Map to Inventor Property:" is set to "Member.Color"
Now going back to the family table I have to enter simple color names like, Red, Green, or Black, I cannot enter names like Water Bubbles, Particle Board, or any of the Inventor Apperance names. If you do you will recive an error on placing the part stating " Unable to create componet"
Futhermore when you click on the Material Column you get a drop down of all the different materials.
Why do I not get a similiar drop down for the colors/apperances?
What is the list of working colors names?
View 2 Replies
View Related
May 17, 2011
Concerning Inventor 2012...
We do a good bit of deriving parts from assemblies. We have a workflow that works well for us, we create PARTS, put them in an ASSEMBLY, then create new PARTS DERIVED from ASSEMBLY. We use Boolean to add/subtract and disregard parts as needed to create these parts. These parts are now given color and reassembled in an yet another final ASSEMBLY as needed and put into a drawing.
Through Inventor 2011 this worked well.
In Inventor 2012 the color is disapering as soon as any change is made on a source part.
1 Changing the color does not work.
2 In the derived from Assembly, opening up (in the browser) the individual .ipt's and right clicking and clicking properties and changing the color only stays until the next change to the source prt.
3 Changing EACH individual face by right click, properties and setting the FACE PROPERTIES from "as feature" to "as part" does work, but is ridiculous to change hundreds of faces on each part. (especially considering we did NOT need this step in 2011)
Is there a switch in the registry (to turn off the standard “as feature” to the parts face).
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
View 9 Replies
View Related
Oct 5, 2012
I have built a 3D turbine that combined more than 50 3D parts. Now I want an assembly drawings to show our clients how to put those parts together. Any autodesk software? Some people recommended Inventor and I have never used it. Is this a right software to do some kinds like this project?
View 5 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related
Jul 10, 2012
I have an assembly with a lot of purchased parts. I need to create a buy out list for purchasing. I've done this many times in the past and have a template set up for this purpose.
So now the problem, In this assembly, I have subassemblies showing up on my parts only parts list.
One of the subassemblies cinsists of two purchased parts. Both parts are set to purchased in the Bill of materials. If I do a parts only list on this assembly, it works as expected, showing two purchased parts. However, if I put that assembly into a higher level assembly, A parts only parts list shows the assembly instead of the individual parts.
View 2 Replies
View Related
May 3, 2013
IV 2010 Suite
Been working over an idw MANY times due to project lag.Today I opened it up and tried adding balloons to an already ballooned assembly.
The parts list has not changed, and is "structured".But, if I try adding balloons, they tag each part, not the entire assembly.
Also, I verified this by trying to add another parts list, which defaults to "parts only".
I can't show my data set, b/c it's HUGE, plus it's proprietary.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 5 Replies
View Related
Sep 22, 2011
I have a .idw that I'm trying to make a parts list on. I select parts list and highlight everything. There are two screws that are not showing up on the parts list. I cannot select them manually either. It's acting like they are not there. Even if I do a complete parts list (adding the assemblies parts into one big list), they still don't show up.
How can I select these parts? What is wrong with them that they do not show up in the parts list?
View 2 Replies
View Related
Jul 25, 2012
I have been working with an assembly today where it is ideal to mirror parts and have figured out how to reuse the parts rather than create new parts. Now I find that when the parts are mirrored, they ate not retaining the mates. Where do I find the setting so they either retain their mates, or prefferably retain the mirror so that if I move the origional, the mirror moves as well?
View 9 Replies
View Related
Jul 22, 2013
I have 4500 OS mapping tiles which i need to convert the colors to one single color rather than the varied layer colors they have at present. Obviously doing this manually will take a long time.
View 8 Replies
View Related
Jan 24, 2012
I have a library that has a primary folder with 11 subfolders. If the LISP can go through all the subfolders, that would be great. But, if it cannot, I can work with going into each subfolder and running the routine. There are over 12,000 files and I don't have the time to open each one and change the color.
Here's what I need the LISP to do:
open the drawing
select everything
change the color to "bylayer"
save
close
open next drawing in folder and repeat
Once it gets to the end of the folder it can stop.
View 9 Replies
View Related
Apr 2, 2013
Lately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies
View Related
Aug 4, 2008
i'm an all out artist in drawing stuff and various of video game things onto a piece of paper. Lately when i scan pictures i usually color them in paint which takes a very long time. I've rescently came across photoshop and i have NO CLUE how to use it. How do i use photoshop to color a drawing or sketch that i've made. If not then does any one know where theres a tutorial in shading, colors, highlights, and basics in coloring an image or drawing somewhere on the net?.
View 2 Replies
View Related
Oct 21, 2011
I like drawing in black and white, but whenever it comes to coloring the drawings, I always tend to just leave it, because it bores me, big time. Any way to "auto" color drawings? Is there some sort of action or plugin that can somehow figure out the black linework and fill in the blanks?
View 4 Replies
View Related
Jan 12, 2008
Hi, I just started working with Photoshop, so I might be making some stupid rookie mistake...but I can't figure out what the hell could be wrong.
When I draw something on a dark background it just vanishes as soon as I fill the area with the paint bucket!
If I have a dark grey background, and draw something in black using the brush, when I try to fill the drawing, for instance green, with the paint bucket, the entire picture becomes green!
It was as if the drawing was never there.
At first I thought I had some wierd setting on my brush, but the wierd thing is that this only happens when I use dark.
View 3 Replies
View Related
