I have a road that leads to a curved highway on ramp, and lets say I have multiple drainage structures along the curb line.
-Instead of the symbols and labels being orientated on view or world, can they be dynamically orientated parallel to a horizontal alignment around the curve?
-In doing so making the symbols/labels not adjust no matter what the ucs view is in model space or paperspace?
Im using C3D 2013
I have created user defiined properties to add up to 5 inverts to a topo point object. Each consists of the direction of the invert as an enumerated list that can be picked from (N, NE, S, SE, etc) and the second is the measured distance from rim down to IE. I created these in order IE1_Dir, IE1_Meas, IE2_Dir, IE2_Meas, etc and the first time I used it everything worked fine and was in the proper order. Now after opening the drawing for a 2nd time all of the UDP's are scrambled making it a bit of a PITA to enter into the proper fields.
I do not see any logical order to why it is displaying this way as if it was in order of creation or alphebetical it would not have changed. Is there any way to correct this or is this a case of Civil 3D is going to do whatever it wants to do?
I cannot get the point labels (Point #, Elevation and description) to show up beside my point markers. Looks like those labels are set to "true". Got to get my drawing to engineer in next day and he needs to see the shots.
I have attached my dwg that I have already inserted the points to. Kind of new to importing points to CIVIL 3D I have been pulling topo from contour lines in the past.
While using AutoCAD 2008 LDD, I was able to set my point label size so that it looked the same in Model Space and Paper Space. I have my Model Space at 1:1, and my Paper Space Viewport set at the Scale Factor as needed, 1" = 50' i.e.. I now am using Civil 3D 2012 and have a decent grasp of Point Label Styles, the problem I am having is that when using the same parameters as mentioned before, my Point Label is at the right size in Model Space, setting the height at a size comparable to the Drawing Scale, such that if the Drawing Scale within the Viewport was 1" = 60', I would set the text size 4.8, but when doing this, it makes my Point Label text size huge.
View 4 Replies View RelatedI was using this in 2011 to match label rotation of an existing point but it no longer works in 2013? What is the value I need to grab and set or will this format not work in 2013,
(defun c:mro (/ doc ss ss2 obj obj2 newrot oldrot)
(vl-load-com)
(setq doc (vla-get-activedocument (vlax-get-acad-object))) (vla-startundomark doc)
(princ "
Select point to match the rotation of to: ")
(setq ss2 (ssget "" '((0 . "AECC_COGO_POINT"))))
(setq obj2 (vlax-ename->vla-object (ssname ss2 0)))
[code].....
When I import Points (w/o Survey Database) that contain Point UDP's they come in just fine, (see attached). However, when I import those same Points thru the Survey Database it does not populate the addition UDP info on the Point Label (see attached). Why? I have created the Styles, Point File Format and I have even added data to Survey DB Extended Properties.
View 3 Replies View RelatedI do know that tere is supposed to be an algorithm in C3D that will recognise when two geometry points are coincident on a profile view...that is, say a profile vertical geometry point happens to occur on a major station (for example).
I have never seen this actually work. When I have this situation, the labels stagger and I get two columns of identical data on my PV.
I know I can remove individual labels bY CTRL+select and eIther erase or turn visibility to false, but I would rather that C3D figured it out for me and removed the duplicate data.
Viideo link explains what I mean..
[URL]....
C3D2011
Win XP
Dell Precision t1600 4Mb RAM
C3D 2011, Win 7, Dell M6500, 8Gb RAM
I am in the process of modifying our current company standards to conform to another set of standards. The main change is switching from "simplex" font style to "Tahoma".
Simple in theory but problematic in execution, our main alignment label style "GEO-LABL", used for P.O.T, PC, ect. utilizes an underlined reference text object in order to control the length of the line under the call. The base insertion places the call perpendicular to the alignment, when dragged to the left or right it switches to stacked text plan readable. Works like a champ with the "simplex" text style - 1.jpg see attached.
Now simply changing the font to "Tahoma" - 2.jpg the larger you make the text the larger the gap.I am trying to stay away from adding a line for the underline due to the difference in lengths needed when the call gets longer or shorter based on alignment name or stationing.
I have some points labeled with elevation only. If I drag the labels away from the point leaders are created but the arrows do not point to the centers of the points. I looked in the label style>dragged state>leaders but I don't see anyway to tell the leaders where to point.
View 9 Replies View RelatedIs it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
In Civil 3d 2013, my points appear as follows with Point # on top, elevation in the middle and description at the bottom.
But when I drag the label, it changes the order of the labels to Description on top, point # in the middle and elevation at the bottom.
How do I make the dragged state labels appear in the same order as the first picture?
Also, how can I keep the colors from picture #1 (red, yellow, green) into the dragged state labels as well?
So I have a survey of a roadway that was created 15 years ago and was converted into autocad civil 3d 2012. No problems there, however, I am going through the survey and rotating the COGO points (ie Traffic Signs, Utility Poles) and the text to be parallel to the roadway. I am in UCS World and have no problems rotating the points and text to what I want. THe problem starts when I rotate the drawing using UCS 3P so that I am looking at a portion of the roadway that is parallel to my computer screen. Now the text and orientation of the signs etc are no longer parallel to the roadway and did not rotate when I rotated the entire project.
Now I was under the impression the points were to rotate automatically to what I set them as, ie parallel to the roadway. I'm sure this is an easy fix or I am not understanding something.
I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.
View 2 Replies View RelatedI am using Civil 3d 2012. What I have is a surface along railroad tracks. Each set of tracks has a different alignment because they aren't parallel. I have a baseline alignment with my stationing set on that. What I want to do is have one profile view showing the multiple track alignments based on the baseline alignment. I can't use the offset alignment because they aren't parallel.
View 1 Replies View RelatedThe issue i'm having now is that when i create a comparison surface, the tinn lines are created on the same layer as my existing surface. what's weird is that it didn't use to do this. so now whenever i try to turn off the tinn in the "edit surface style" all surfaces are either turned on or off. any way to fix this so that each new surface is given it's own display properties?
View 3 Replies View RelatedHow to make the process of manually drawing a boundary around a topo so that you can add it as a boundary in a C3D surface? Sometimes the topo's we recieve already has a boundary in it, but often, there is not. So we have to manually draw a polyline around the whole extent of the topo, which can take a long time.
View 9 Replies View RelatedI am trying to create a localized existing surface from a very large topo. I promoted the existing surface shortcut into my drawing, then created a cropped surface to be put in a new drawing. After creating the cropped surface the new file shows that a surface has been created, however, the surface contains no data. I am using c3d 2012.
View 1 Replies View RelatedI am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
Civil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIm still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedI have a database of points I am trying to import, and the point data for each point includes a hyperlink. I've created a set of custom User-Defined Property Classifications for all the data types in the point database, and I've created a point file format to use to import the points.
It's a database of existing curb ramps, the data includes things like widths, slopes, some text, and a hyperlink to the Google Streetview at each ramp. I've created a custom point label that will show the data I need to see at each ramp.
All goes great except that the import fails because of the hyperlinks. I've tested it by removing the hyperlinks from a small test portion of the data set, and the test points are then successfully imported. I suppose I can delete the hyperlinks from the entire database, but if there is a way to include the hyperlinks in the point import I would prefer that.
Win 7E 64-bit, Intel i7, 12 GB
C3D 2012
In uploading the Point input data into the AutoCAD Civil 3D 2013 software program, is it possible for me to add more Point Attribute items after Point Number, X, Y, Z? I need to have the chemical results/data attached to the (sampling) Point that has the Point #, X, Y, Z - like Point Number, X, Y, Z, Arsenic, Lead, Mercury in the input .txt (or .csv) file.
View 9 Replies View RelatedHow to set a default point style for point groups? Whenever I import survey points, I always put them into their own point group, so I can display each day's worth of survey data differently. For some reason, the point style always defaults to a certain style (our control point symbol). I'd like it to default to Basic, so I don't have to change this every time. Is it a template drawing setting somewhere?
View 5 Replies View RelatedFirst time importing into 2012-have csv file that I imported. Coordinates land in right spot. Local system-No transformations/State Plane zones attached. When I look at them with tracking everything is okay. When I export the points they are the same I imported.
When I list the points they are way off?
C3D 2012
Is there a 'property' to use the Point Group Name. I need it in the Point Table Style: Title text like this:
I am trying to get point 1234 to show a label that says Point #1234 and then in a grading plan have that same point show up as a spot elevation. I have tried making two point groups "Point #" and "Spot Grades" which include the same points in them with two different label styles for each group, however the point seems to only want to take one label style at a time.
C3D 2012
Win 7 x64
8 GB Ram
Quadro K4000
The bottom of a diagonally stacked fraction in Mtext aligns to the baseline of the string, which pushes the number with a fraction upward, which looks bad- see attached. Can this be corrected?
View 2 Replies View RelatedI am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedWhen generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.