AutoCAD Civil 3D :: How To Convert Dwg To Genio
Oct 9, 2013I have a dwg file but need to convert to genio using the product enhancement tool. I have downloaded and installed this but dont know how to convert to genio?
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Convert Figure To Feature Line - Export Survey Figures To Genio?
Sep 12, 2013I have a client who uses Bently MX Roads for road design and requires that survey data be supplied in GENIO format. I realise that there are many possible options to get Civil3D survey data into MX, but I am trying to explore the use of the Subscription Extension to Import/Export GENIO.
Surfaces - no problem. Points - I see how I can get that to work. But the only linework that can be exported is Feature Lines, and it is also important that the feature lines have a name (likely related to the layer it is on).
I can convert survey figures to feature lines and name them one by one but would be very time consuming for a whole survey. Is there any way of doing all figures at once?
I'm guessing not and that it is probably easier to do the Genio creation from dwg in MX itself.
Civil3D 2014 - Windows7 64bit
AutoCAD Civil 3D :: GENIO Import Query
Nov 2, 2012I'm using the GENIO import tool and have run into a problem - the data is imported but due to the way the data is used in MX there are a multitude of crossing 3D polylines (see screenshot).
The strings are all "L" strings which are typically used in MX to define open areas where spot levels are surveyed (would be points in C3D).
The only way I can see to get around this is to create Civil Points at each vertex and use these in the surface build - any better solution (apart from requesting a triangular DTM of the MX surface)?
AutoCAD Civil 3D :: Export Contours From Surface Using Genio Exporter
Nov 5, 2013I need to output the contours my surface model to a genio for use in Mx. I have the Genio exporter tool installed but when i output the genio all that appears is the Boundary line without the contours, which when i think about it makes sense as the surface contours is more a display option rather than actual contours. Is there a way of exporting the contours via genio.
View 4 Replies View RelatedAutoCAD Civil 3D :: Exporting Surface Triangles Using Genio Export Extension (2013)
Mar 11, 2013with the Genio Exporter. I need to export the surface triangles from my job, but the Genio export dialouge box only gives me the option to export suface boundaries.
View 4 Replies View RelatedAutoCAD Civil 3D :: Convert DWG To DTM
Aug 2, 2013I have contours in AutoCAD Civil 3D. I want to convert them to dtm file format. I have a program from ADAMTech called 3DM Analyst that will only take dtm format.
View 2 Replies View RelatedAutoCAD Civil 3D :: Convert STP File To DWG
Jul 20, 2012I need to insert a 3d component into our AutoCAD drawing, and the vendor can only supply this as a .stp (step) file. Need to convert the attached .stp file to .dwg.
The file has been zipped because I am unable to upload a file with the .stp extension.
AutoCAD Civil 3D :: How To Convert TDS Raw File
Mar 27, 2012I have a tds raw file that I would like I would like to import into a new c3d drawing. I've tried and tried to convert it using the program inside of c3d, but to no avail.
View 6 Replies View RelatedAutoCAD Civil 3D :: Convert DWG To Simple 2D DWG
May 17, 2012I would like to open discussion about function that could easilly convert Civil 3D drawing with its all corridors, grading groups, feature lines etc. to regular AutoCAD 2D drawing to be able to hatch, measure, trim and so on. Is it clear, that corridor edit commands and features are not good enough to add another structures as stairs, culverts, parking lots with green islands and another civil structures...
Export to AutoCAD or AEC Explode converts drawing to some 2D/3D exploded hybrid, where it takes hours of editing, flatting and joining lines to make graphically correct and usable 2D drawing. And what worse, when the design is changed, user has to start from scratch again and again, which is not twice effective... And it is just directly against all Autodesk marketing phrases how to work smarter using BIMs.
AutoCAD Civil 3D :: How To Convert TXT To PNT File
Mar 13, 2012I recently requested a .tin file from our surveyor. He sent the file. When making a surface from the .tin file, I got the error message, need the .pnt file as well. When I requested the .pnt file from our surveyor he sent a .txt file. It has the format x, y, z coordinates in a list. Without having to call and request info from the surveyor again, which he may not know how to do, can I convert the .txt file to a .pnt file?
Example of .txt file:
2,10025686.85,3098661.38,631.18,2 712
4,10025978.82,3098436.88,633.01,2 712
7,10024706.90,3098675.65,626.08,712 CA INC
8,10024261.13,3098602.11,634.21,712/TF CONTROL
9,10024780.84,3097515.40,630.93,12 60D
AutoCAD Civil 3D :: Convert Pline To Alignment?
Oct 30, 2013How to convert pline to Alignment C3D 2014
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert Feet To Meter
Mar 14, 2013I have browsed one file in meters from Pythagoras to dwg. When I opened it with Civil 3D the drawing units become feet. Where is the problem and how can I convert the whole drawing to meters?
View 5 Replies View RelatedAutoCAD Civil 3D :: Fieldbook Importing - Convert Raw Into FBK
May 22, 2012I am working with our surveyor to import fieldbook file into AutoCAD Civil 3D 2012. To convert raw into fbk I used the Survey Data Collection Link. I get a error message during the conversion "Bad raw data line at line 10. Unable to continue. Line:BK,OP7,BP563,BS".
I am assuming the problem is no value is set for the back sight azimuth. I went and edited the raw file giving the back sight azimuth a value of 0 and the program successfully converted the file to fbk format.
I've created a new database, and import events. When importing the created field book file I get an error at line 12 "Error: you must occupy a point first." Is there something missing in the raw or fbk file that is causing this error?
Here is the original raw file and the converted fbk file.
AutoCAD Civil 3D :: Batch Convert DWG Files To DXF?
Mar 7, 2013We have to submit a set of 18 drawings to a local municipality. They want the CAD files (in this case Civil3D 2011) in .DXF format. Is there an easy way to convert them all at once or do I have to SAVEAS each file one at a time?
View 5 Replies View RelatedAutoCAD Civil 3D :: Pickets To Points Convert
Aug 4, 2013I have these pickets, and I'm trying convert to points (such as in this video [URL], but then I'm finishing every points have z coordinate "0". I think because Z coordinate is in attribute, but not in block, but don't know how fix it.
[URL]
AutoCAD Civil 3D :: Convert Point From UTM-39N To Lat / Long
Aug 8, 2012I was tried to convert a point from UTM-39N to Lat/Long using geodetic calculator; but when I checked the converted coordinates by another applications (like GeoLab); they were a little different (about two seconds) & I'm sure GeoLab is right.
My settings and other information is attached.
AutoCAD Civil 3D :: Convert CRD File To ASCII
Jun 7, 2013I have a .crd file which i need to convert to ASC1II file to then import into civil 3d to build a ground model.
I have used the survey link: [URL] ...
However when i click convert i get an error saying points not found, please see attached.
How i can go about importing the .crd file?
AutoCAD Civil 3D :: How To Convert Sections Into Polylines
Jun 5, 2012how do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert 3D Face To Linework
Aug 30, 2012I received a 3D drawing but only need linework from it. I have flattened it out so I am able to export the linework. The problem is when I import the drawing into another software (Trimble Business Center), the lines are still 3D face and am not able to treat it like linework. Is there a way to convert a 3D face into line or polyline in C3D?
View 6 Replies View RelatedAutoCAD Civil 3D :: Convert From 2013 To 2012
Jun 27, 2012Is there anyway to go back to 2012 once you've opened a file in 2013?
I would like to recover work done in 2013, at least the styles...
I've found out that I can export pipe networks to landxml and then import the file in 2012, but I have no styles if I do that...
Using Building Design Suite Ultimate 2014
AutoCAD Civil 3D :: Convert / Import VWX File Into DWG
Apr 8, 2010I had someone send me a .vwx file that I need to convert/import into AutoCAD3D 2010. The File/Import menu does not have an option for this type of file. They also sent a .dwg file but I expect I should be able to import the .vwx into any .dwg file.
View 8 Replies View RelatedAutoCAD Civil 3D :: Convert 2D Picture Into 3D Model
Jun 4, 2012conver a 2D picture into a 3D model in .CAD format? This model is used for lasering.
View 1 Replies View RelatedAutoCAD Civil 3D :: Convert To Version 2004
May 22, 2013I have a surveyor requesting that we convert our Autocad 2012 Civil 3D files to Autocad 2004 so they can use them to produce as-built drawings. Is that possible? The drawings include profiles and cross sections.
View 6 Replies View RelatedAutoCAD Civil 3D :: How To Convert Polyline Into Alignment
Oct 30, 2013How to convert polyline into alignment?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Convert To Cogo Point
Apr 23, 2012I've this file.It's containing survey block point ..I can't convert it to cogo point ..Also no body can do it cuz it's coming from civil 3D by exporting the file.......
View 9 Replies View RelatedAutoCAD Civil 3D :: Convert Pipe Networks To Polylines
Jul 1, 2013I have a drawing that started as a pipeline network and am trying to easily convert the pipes to polylines or something of the sort to export to shapefiles.
View 4 Replies View RelatedAutoCAD Civil 3D :: Convert DWG File With Level Curves
Apr 23, 2013I have a file saved in autocad 2013 (dwg file extension) that contains level curves and points similar that an autocad civil 3d file and also have the layers. I want to convert this file to a civil 3d file for doing section of the curves whit the program. I don't know if it exist a method or not directly or indirectly.
View 1 Replies View RelatedAutoCAD Civil 3D :: Any Way To Convert Group Of Lines To Polylines
Nov 1, 2012On several occasions I have had to convert a group of lines to polylines but had to select and convert each line one after the other. Instead of one after another is there a way or a command to select all the lines and convert them as group into polylines?
View 7 Replies View RelatedAutoCAD Civil 3D :: Convert Land Desktop Points
Aug 23, 2011When converting Land Desktop Points to Civil 3D, it doesn't display point labels, descriptions, elevations, or point numbers. How do I correct this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Convert Into DGN Micro Station Drawing
Dec 28, 2012I have a C3D 2013 Site plan with contours, and would like to know if it is possible to convert
this into a DGN Mico Station drawing ? I am hoping to be able to list the elevations off the individual contour lines.
AutoCAD Civil 3D :: Automated Way To Convert Ellipses Into Circles?
Jul 2, 2013I have a large amount of "ellipses" in a Civil 3D 2013 drawing that were created as "circles" in Cyclone 8.03 (the laser scanning software from Leica-Geosystems). I need to work with circles so I can label the diameter of each in my drawing. Is there a way to automatically convert these ellipses, that have the same exact minor and major axis, into circles? Other wise I will have to reapeat the work in Civil 3D using the same point cloud!
View 8 Replies View Related