AutoCAD Civil 3D :: How To Adjust Side-shots In Cogo Editor
Jul 17, 2013
What is the trick to getting the Cogo Editor to adjust side-shots set during a traverse?
I input the traverse 'points' into the Cogo Editor via a polyline, and I set my POB and POC (same point). I then inserted additional 'side-types' in Cogo Editor to reflect various side-shot positions. For 'Angle/Direction' info for these inserted side-types I selected points in the drawing; Cogo Editor did not let me select just one point per side-shot - I had to select two points each time, so I selected the occupied position and the side-shot position.
When I view a report, regardless of adjustment, it only shows data for the polyline sides. Post-adjustment, when I inserted cogo points into the drawing from Cogo Editor, only the vertices of the polyline were inserted as cogo points, i.e., it appears that only those points were 'seen' and adjusted.
Attached is a view of the Cogo Editor.
View 2 Replies
ADVERTISEMENT
Sep 16, 2013
Question 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
View 2 Replies
View Related
May 23, 2013
WS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
View 2 Replies
View Related
Oct 29, 2012
I am wanting to draw lines from gun setup to the back sight, and then from the gun to all the radial shots that were taken from that setup. I would like to do this as automatically as possible. (i.e. a bunch of radial lines from the gun to each individual shot from that setup).
Our raw files are in TDS format. I could do it manually by using the transparent command 'PN, but I would have to draw a line from the setup to the shots individually.
Otherwise, I could write a lisp that asks me for the setup pt number, and I could give it a range ot pt #'s and have it draw lines from the gun to each of the pts in the range. (that is, if 'PN works in lisp).
View 2 Replies
View Related
Feb 17, 2012
I lost the ruler to adjust the width and length of mtext objects in the editor settings.
How can I get this ruler back?
View 2 Replies
View Related
Jan 7, 2013
image attached.is there a way to get rid of the hover information that pops up for cogo points? while im looking at the points in a list there is a box thats pops up with the information i am looking at blocking the information i need to look at. if there is a way.
View 5 Replies
View Related
Oct 3, 2013
I have a long animation. I want to use populate at frame 12000. But populate frames won't let me go over 10000 frames. How can I get my people to animate after frame 10000 as you cant adjust the start point in the curve editor.
View 7 Replies
View Related
Feb 1, 2013
I was able to move Cogo points onto an existing line or polyline, and retain their existing Z value, rather than changing to 0.00 of the height of the poly line/line.
Is there a variable to change this? Thought it might be "OSNAPZ" but thats already set to 1 and this is still happening.
View 5 Replies
View Related
Jun 11, 2012
I am working in a .dwg that i have previously created cogo point in, but now when i try to created cogo points manually, it goes through the prompts, but will not create the point. P.S I am using Civil 3d 2011
View 2 Replies
View Related
Oct 29, 2012
I want to try the point inverse report but I am stumped on how to get to this dialog box?
I type 'cogo' and get to a cogo traverse box but nothing shows up about inverse report.
Is there a non-ribbon method?
Im so green at the ribbon that I type "ribbon" but still cant find it.
View 2 Replies
View Related
Apr 23, 2012
I've this file.It's containing survey block point ..I can't convert it to cogo point ..Also no body can do it cuz it's coming from civil 3D by exporting the file.......
View 9 Replies
View Related
Jan 4, 2013
I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies
View Related
Sep 10, 2012
How to set a default point description to match the point number. I need to match the point number and the point description as per below:
Point # = 1 - Description = 1Point # = 2 - Description = 2Point # = 3 - Description = 3and so on.
Is there a quick way to add this description once the points are already created?
Also, it seem I can't make the default style and label to work. I edited the Feature Setting on the Setting tab of the Toolspace and I made sure there's no child override. When I open the point creation menu, my default styles are there (grayed out), but when I create the points, they pick up another style and another label style.
View 9 Replies
View Related
Mar 1, 2012
When I go into 3dorbit, or orbit mode, as I am panning moving around in space I can still see the points. As soon as I press 'Esc' or 'Enter' the points dissapear, how can I get them to stay visible?
View 2 Replies
View Related
Apr 15, 2012
Is there an easy way to export Cogo Points with attributes to a text file e.g csv file.
The attached imae shows an example of the Cogo Points I need to export and open in a spreadssheet. I need all the information (not just E,N,Z,D) of the point.
View 2 Replies
View Related
Sep 5, 2013
My delima is regarding cogo point readability. I'm used to LDD so this may be the issue. I set a cogo point but I want it to stay in the same orientation. if I use orbit or dview the cogo point data reorients (rotates) to line up horizontally. I would like the data to remain as set originally. I tried changing plan readabilty in label styles but when I drag the point it rotates to the current view orientation. Is there a way to control the rotation once dragged so it does not reorient if I change the orbit or dview?
View 9 Replies
View Related
Oct 1, 2012
I have a dwg that looks great in model space, however I created a couple paperspace layouts and then used Align Space to rotate to those views. The problem is that my point label style rotates the point labels based on the align space rotation.
I looked into the point label settings and changed the orientation reference to the World Coord. Sys., but it does not make the points rotate correctly. (world reference is the goal).
View 2 Replies
View Related
Jun 28, 2012
Adding a prefix to the end of a cogo point ie.(when we bring in info we have a top of curb and a face of curb shot and we add TC and FC to the text componite editor.) is there a process where i can add this at one time or set civli up to where when it processes the file to recognize them and add this automatically for minimize drafting time?
View 4 Replies
View Related
Feb 11, 2013
We are in the middle of upgrading from LDD2008 to Civil3D2013. This is a 2 part question. Since there are NO point labels similar to Poiint labels in LDD2008. It is making cleaning the elevations up very teadious. With point labels that are just Mtext. I would rotate 1 label and then match properties to rotate the rest and then jiust more the elevations to make them readable.
How do you all deal with cleaning up the elevations? Is there a way to match proprties as far as the rotatiion of the points? or do you Create blocks from Cogo points?
So, I starting playing with the Creating Blocks from Cogo Points. This creates a block with attributes similar to the way Softdesk treated points back in the day. I ran into a couple of issues. 1 being, it rounds the elevation to 3 decimals places.
When it creates blocks from the Cogo Points some of the blocks are giving me 0.000 elevations for points that had actual elevations.
Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit
View 7 Replies
View Related
Jul 30, 2012
I would like to rotate my Cogo point label so that i will be able to see it from a set view or a different UCS. Example I would like to see the label in the "LEFT" view.
View 1 Replies
View Related
May 18, 2012
I have an existing drawing that I have picked cogo points for survey layout about 3 weeks ago. Now when I open the drawing the points show up on the screen, but they are not in the prospector. Where did they go? What do I need to do to get them back in the prospector?
View 4 Replies
View Related
Jul 1, 2012
As survey data collectors now come with cameras intergrated, it would be very useful to be able to have a way of hyperlinking the imported survey points to the images. Images are normally named by the survey point number that they are associated with.
Can Civil3D import points and automatically have the hyperlink field of a COGO point populated?
Can this be achieved through the survey database? Or maybe via a point-file with UDP's?
Civil3D 2014 - Windows7 64bit
View 6 Replies
View Related
Aug 19, 2013
Here is what I am trying to do,
I am working on an application, where the user would would choose
Category of point
Sub-category of point
Then click on a Button
1. Which then querry SQLite DB based on the querry a COGO point with relevent RDesc in inserted.
2. A suitable block is inserted in the same location.
3. Updates the handle for the block to the COGO UDP
Now I have commeted the last part of updating UDP.
I have issue inserting COGO.
Sometimes it works some time it throws fatal exception, object instance is not set. I am unable to catch the fatal exception.
Mini Dump - The thread tried to read from or write to a virtual address for which it does not have the appropriate access
Here is the code,
Global.variables.spt_current_COGO_pt = null; PromptPointOptions ppo = new PromptPointOptions("
Select the location to Create a Smart Point : "); PromptPointResult ppr = Global.variables.ed.GetPoint(ppo); if (ppr.Status != PromptStatus.OK) return false;
[Code] .....
View 5 Replies
View Related
Apr 12, 2012
I have a layout in my drawing (Civil 3d 2011) with multiple viewports and my point symbols (trees, manholes, etc.) won't display. I have other layouts in the same drawing that display them fine, but I need to use this specific layout for what I'm doing. This must be a setting of some sort but I can't seem to figure it out.
View 3 Replies
View Related
Sep 18, 2013
I have a large number of cogo points that I have set. I would like to move, as a group, the label portion only and leave the coordinate value as is. This would be a time saver as I am seeing that I am going to have to move every point individually. I used to be able to do this in LDD along with changing the rotation. I've tried locking the points and then moving them but the values change. Not too happy with the lack of control with the leader either.
View 3 Replies
View Related
Apr 8, 2012
This is a fantastic option, but I have a problem the whole drawing is rounded to two decimal places.
But when I execute create block from Cogo points he round heights on all points to three decimal places,where the third decimal is 0.
Example height is H =198.36 after H=198.360.
View 4 Replies
View Related
Mar 11, 2011
I would like to copy cogo points from one drawing to another, keeping both their layer and user defined properties.
I can:
1. Do a copy and then paste to orginal co-ords. This keeps the layers but loses the UDP's.
2. Export the points to a csv and import into new drawing. This keeps the UDP's but loses layers
3. Export to XML. This loses both Layers and UPD's
I don't have a desc key file setup for the codes on these pts so this is not an option.
View 9 Replies
View Related
Jun 7, 2013
I have created cogo points for field staking. I'd like to share them through the survey database.Can I add the points to the Survey Database without first having to export them to a file?
View 1 Replies
View Related
Sep 5, 2013
C3DR14
I'm pretty sure I can replace my cogo point marker with a 3d tree that I can see in the object viewer using the realistic style and print out. Problem is where is that 3d block of the trees?
View 3 Replies
View Related
Aug 5, 2012
any way to make a cogo point label become freely movable. Just now I can move it somewhat freely to the left or to the right of the original location, but if I want to move it just up or down it doesn't work very well. It flips around the (invisible) leader.
View 2 Replies
View Related
Aug 10, 2012
I am a surveyor doing an asbuilt of some ponds. I am working in the engineer's dwg. In PS, he does not scale down his drawing sheet block to 1"=1', he keeps it the same scale as model space, i.e. 1"=50'.
He has a viewport in the layout, and my Cogo Points seemed to be scaled at 1"=1', which makes them much to small, but everthing else is scaled correctly.
How can I make my Cogo Points appear bigger in PS?
I tried dbl-clicking in the viewport to be in MS, and the viewport says it's scale is 1'0" = 1'0". When I change it to 1"=50', the model view shrinks way down (the viewed area is bigger), and when I scroll to make the model view bigger, the Cogo Points are still small.
When I read the Properties of the viewport, it says:
Anno scale: 1"=50
Standard scale= 1"=50
Custom scale= 0.02
How I can get this viewport to make my Cogo Points big as they should be?
C3d 2010 (no SP)
Win7
View 5 Replies
View Related
